CHENMKO ENTERPRISE CO.,LTD CHUMD47PT SURFACE MOUNT Dual Digital Silicon Transistor VOLTAGE 50 Volts CURRENT 100 mAmpere APPLICATION * Switching circuit, Inverter, Interface circuit, Driver circuit. FEATURE * Small surface mounting type. (SC-88/SOT-363) * High current gain. * Suitable for high packing density. SC-88/SOT-363 * Low colloector-emitter saturation. * High saturation current capability. * Both the CHDTA143E & CHDTC143E in one package. (1) (6) 0.65 1.2~1.4 2.0~2.2 0.65 (4) 0.15~0.35 (3) 1.15~1.35 0.8~1.1 0.08~0.15 0~0.1 0.1 Min. CIRCUIT 6 4 R1 DTr2 R2 2.15~2.45 R2 DTr1 R1 1 3 SC-88/SOT-363 Dimensions in millimeters CHDTA143E LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134). SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT VCC Supply voltage − -50 V VIN Input voltage -30 +10 V − -100 − -100 − 150 mW O C IO DC Output current IC(Max.) Tamb ≤ 25 OC, Note 1 mA PTOT Total power dissipation TSTG Storage temperature −55 +150 TJ Junction temperature − 150 O C Thermal resistance − 140 O C/W RθJ-S Note 1. Transistor mounted on an FR4 printed-circuit board. junction - soldering point 2006-07 CHDTC143E LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134). SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT VCC Supply voltage − 50 V VIN Input voltage -10 +30 V − 100 − 100 − 150 mW +150 O C C C/W IO DC Output current IC(Max.) Tamb ≤ 25 OC, Note 1 mA PTOT Total power dissipation TSTG Storage temperature −55 TJ Junction temperature − 150 O RθJ-S Thermal resistance − 140 O junction - soldering point Note 1. Transistor mounted on an FR4 printed-circuit board. CHDTA143E CHARACTERISTICS Tamb = 25 °C unless otherwise speciÞed. SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT VIoff) Input off voltage IO=-100uA; VCC=-5.0V -0.5 − − V VI(on) Input on voltage IO=-20mA; VO=-0.3V − − -3.0 V VO(on) Output voltage IO=-10mA; II=-0.5mA − -0.1 -0.3 V II Input current VI=-5V − − -1.8 mA IC(off) Output current VI=0V; VCC=-50V − − -0.5 uA hFE DC current gain IO=-10mA; VO=-5.0V 20 − − R1 Input resistor 3.29 4.7 6.11 KΩ R2/R1 fT Resistor ratio Transition frequency 0.8 − 1.0 250 1.2 − MHz IC=-5mA, VCE=-10.0V f=100MHz = Note 1.Pulse test: tp≤300uS; δ≤0.02. CHDTC143E CHARACTERISTICS Tamb = 25 °C unless otherwise speciÞed. SYMBOL PARAMETER CONDITIONS MIN. TYP. 0.5 − IO=20mA; VO=0.3V − IO=10mA; II=0.5mA − Input current VI=5V IC(off) Output current hFE DC current gain R1 Input resistor R2/R1 fT Resistor ratio Transition frequency UNIT V − 3.0 V 0.1 0.3 V − − 1.8 mA VI=0V; VCC=50V − − 0.5 uA IO=10mA; VO=5.0V 30 − − 3.29 4.7 6.11 KΩ 0.8 − 1.0 250 1.2 − MHz Input off voltage IO=100uA; VCC=5.0V VI(on) Input on voltage VO(on) Output voltage II Note 1.Pulse test: tp≤300uS; δ≤0.02. MAX. − VIoff) IC=5mA, VCE=10.0V f=100MHz = RATING CHARACTERISTIC CURVES ( CHUMD47PT ) CHDTA143E Typical Electrical Characteristics Fig.1 Input voltage vs. output current (ON characteristics) VO=−0.3V −50 OUTPUT CURRENT : Io (A) INPUT VOLTAGE : VI(on) (V) −100 −20 −10 −5 −2 Fig.2 Output current vs. input voltage (OFF characteristics) Ta=−40°C 25°C 100°C −1 −500m −200m −100m −100µ −200µ −500µ −1m −2m −10m −5m −200µ −100µ −50µ −20µ −10µ −5µ −2µ −1µ 0 −5m −10m −20m −50m−100m Fig.3 DC current gain vs. output current VO=−5V DC CURRENT GAIN : GI 200 100 50 Ta=100°C 25°C −40°C 20 10 5 2 1 −100µ −200µ −500µ −1m −2m −5m −10m −20m −50m−100m OUTPUT CURRENT : IO −1.0 −1.5 −2.0 −2.5 −3.0 Fig.4 Output voltage vs. output current −1 OUTPUT VOLTAGE : VO(on) (V) 1k −0.5 INPUT VOLTAGE : VI(off) (V) OUTPUT CURRENT : IO (A) 500 VCC=−5V Ta=100°C −2m 25°C −1m −40°C −500µ −500m −200m lO/lI=20 Ta=100°C 25°C −40°C −100m −50m −20m −10m −5m −2m −1m −100µ −200µ −500µ −1m −2m −5m −10m −20m −50m−100m OUTPUT CURRENT : IO (A) RATING CHARACTERISTIC CURVES ( CHUMD47PT ) CHDTC143E Typical Electrical Characteristics Fig.1 Input voltage vs. output current (ON characteristics) 100 Fig.2 Output current vs. input voltage (OFF characteristics) 10m 5m VO=0.3V OUTPUT CURRENT : Io (A) INPUT VOLTAGE : VI(on) (V) 50 20 10 Ta =- 40OC O 25 = C 100OC 5 2 1 500m 200m 100m 100 200 500 1m 2m 2m 1m 500 VCC=5V Ta=100OC 25OC -40 OC 200 100 50 20 10 5 2 1 5m 10m 20m 50m 100m 0 0.5 OUTPUT CURRENT : IO (A) Fig.3 DC current gain vs. output current 1k 2.5 3.0 lO/lI=20 500m Ta=100 C 25OC -40OC 100 50 20 10 5 2 OUTPUT VOLTAGE : VO(on) (V) DC CURRENT GAIN : GI 2.0 1 VO =5V O 1 100 200 1.5 Fig.4 Output voltage vs. output current 500 200 1.0 INPUT VOLTAGE : VI(off) (V) Ta=100OC 25OC -40 OC 200m 100m 50m 20m 10m 5m 2m 500 1m 2m 5m 10m 20m 50m100m OUTPUT CURRENT : IO (A) 1m 100 200 500 1m 2m 5m 10m 20m 50m 100m OUTPUT CURRENT : IO (A)