CHENMKO ENTERPRISE CO.,LTD CHUMH10PT SURFACE MOUNT Dual Digital Silicon Transistor VOLTAGE 50 Volts CURRENT 100 mAmpere APPLICATION * Switching circuit, Inverter, Interface circuit, Driver circuit. FEATURE * Small surface mounting type. (SC-88/SOT-363) * High current gain. * Suitable for high packing density. * * * * SC-88/SOT-363 Low colloector-emitter saturation. High saturation current capability. Internal isolated two NPN transistors in one package. Built in bias resistor(R1=2.2kΩ, Typ. ) (1) (6) 0.65 1.2~1.4 2.0~2.2 0.65 (4) 0.15~0.35 (3) 1.15~1.35 0.8~1.1 0.08~0.15 0~0.1 0.1 Min. CIRCUIT 6 4 R1 R2 2.15~2.45 R2 R1 1 3 SC-88/SOT-363 Dimensions in millimeters LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134). SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT VCC Supply voltage − 50 V VIN Input voltage -5 +12 V − 100 − 100 − 200 mW O C IO DC Output current IC(Max.) Tamb ≤ 25 OC, Note 1 mA PTOT Total power dissipation TSTG Storage temperature −55 +150 TJ Junction temperature − 150 O C Thermal resistance − 833 O C/W RθJ-A junction - ambient air Note 1. Transistor mounted on an FR4 printed-circuit board. 2004-01 RATING CHARACTERISTIC ( CHUMH10PT ) CHARACTERISTICS Tamb = 25 °C unless otherwise speciÞed. SYMBOL PARAMETER CONDITIONS TYP. MAX. UNIT − − V − 1.1 V − 0.1 0.3 V VI=5V − − 3.6 mA VI=0V; VCC=50V − − 0.5 uA IO=10mA; VO=5.0V 80 − − 1.54 2.2 2.86 KΩ 16.8 − 21 250 25.2 − MHz VIoff) Input off voltage IO=100uA; VCC=5.0V VI(on) Input on voltage IO=5mA; VO=0.3V VO(on) Output voltage IO=5mA; II=0.25mA II Input current IC(off) Output current hFE DC current gain R1 Input resistor R2/R1 fT Resistor ratio Transition frequency Note 1.Pulse test: tp≤300uS; δ≤0.02. MIN. IE=5mA, VCE=10.0V f=100MHz = 0.5 RATING CHARACTERISTIC CURVES ( CHUMH10PT ) Typical Electrical Characteristics Fig.1 Input voltage vs. output current (ON characteristics) 100m VO=0.2V OUTPUT CURRENT : Io (A) INPUT VOLTAGE : VI(on) (V) 10 Ta =- 25OC O 25 = C 75OC 1.0 0.1 0 Fig.2 Output current vs. input voltage (OFF characteristics) 10m 20m 30m 40m 10m Ta= 75O C 25OC -25 OC 1m 100u 10u 1u 50m VCC=5V 0 OUTPUT CURRENT : IO (A) OUTPUT VOLTAGE : VO(on) (V) DC CURRENT GAIN : GI 100 OUTPUT CURRENT : IO (A) 4 5 6 1 VO =10V 10m 3 7 8 9 10 Fig.4 Output voltage vs. output current Ta= 75OC 25OC -25OC 10 1m 2 INPUT VOLTAGE : VI(off) (V) Fig.3 DC current gain vs. output current 1k 1 100m 100m lO/lI=10 Ta= 75 OC 25OC -25 OC 10m 1m 0 10m 20m 30m 40m OUTPUT CURRENT : IO (A) 50m