S05A70PT CHENMKO ENTERPRISE CO.,LTD THRU SCHOTTKY BARRIER RECTIFIER VOLTAGE RANGE 70 - 100 Volts S05A100PT CURRENT 5 Amperes FEATURES * Plastic package has Underwriters Laboratory Flammability Classification 94V-0 * Metal Silicon junction, majority carrier conduction * Low power loss,high efficiency * High current capability, low forward voltage drop * Guardring for overvoltage protection * For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications * High temperature soldering in accordance with CECC 802 / Reflow guaranteed TO-220A .108 (2.75) .153 (3.9) .146 (3.7) .413 (10.5) .374 (9.5) .187 (4.7) .148 (3.8) .053 (1.3) .047 (1.2) .270 (6.9) .230 (5.8) .610 (15.5) .583 (14.8) MECHANICAL DATA .04MAX. (1.0) Case: JEDEC TO-220A molded plastic Terminals: Lead solderable per MIL-STD-750, Method 2026 Polarity: As marked Weight: 1.81 grams ( Approximately ) .157 (4.0) .583 (14.8) .531 (13.5) .051 (1.3) .043 (1.1) .035 (0.9) Ratings at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60 HZ, resistive or inductive load. For capacitive load, derate current by 20%. .028 (0.7) .020 (0.5) .126 (3.2) .102 (2.6) .091 (2.3) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS TO-220A Dimensions in inches and (millimeters) MAXIMUM RATINGES ( At TA = 25oC unless otherwise noted ) SYMBOL S05A70PT S05A80PT S05A90PT S05A100PT UNITS Maximum Recurrent Peak Reverse Voltage VRRM 70 80 90 100 Volts Maximum RMS Voltage VRMS 49 56 63 70 Volts Maximum DC Blocking Voltage VDC 70 80 90 100 RATINGS Maximum Average Forward Rectified Current Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) 5.0 Amps IFSM 125 Amps R Typical thermal resistance per leg ( NOTE 1 ) Operating and Storage Temperature Range Volts IO o 5.0 JC TJ, TSTG C/W o -60 to +150 C ELECTRICAL CHARACTERISTICS ( At TA = 25oC unless otherwise noted ) CHARACTERISTICS SYMBOL Maximum Instantaneous Forward Voltage at 5.0 A DC Maximum instantaneous reverse current at VF TC = 25oC S05A90PT S05A80PT S05A70PT 0.75 S05A100PT 0.85 UNITS Volts 5.0 mAmps 50 mAmps IR rated DC blocking voltage per leg ( NOTE 2 ) o TC = 125 C NOTES : 1. Thermal resistance from junction to case per leg 2. Pulse test : 300 us pulse width, 1% duty cycle 3. Suffix " P " = Case Positive, Suffix " R " = Case Negative. 2001-6 RATING CHARACTERISTIC CURVES ( S05A70PT THRU S05A100PT ) PEAK FORWARD SURGE CURRENT, (A) AVERAGE FORWARD CURRENT, (A) FIG. 1 - TYPICAL FORWARD CURRENT DERATING CURVE 10 8 6 4 Single Half Wave 60HZ Resistive or Inductive Load 2 0 0 25 50 75 100 125 150 FIG. 2 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 175 150 8.3 ms Single Half Sine-Wave (JEDEC Method) 125 100 75 50 25 0 0 2 4 CASE TEMPERATURE, ( oC ) FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARCTERISTICS INSTANTANEOUS REVERSE CURRENT, (mA) S05A70PT~S05A80PT 1.0 S05A90PT~S05A100PT PULSE WIDTH=300uS 1% DUTY CYCLE .01 60 80 100 4 TJ = 125oC 1.0 0.4 0.1 .04 TJ = 25oC .01 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 INSTANTANEOUS FORWARD VOLTAGE, (V) 20 40 FIG. 5 - TYPICAL JUNCTION CAPACITANCE 1000 600 400 200 100 TJ =25oC 60 40 20 S05A70PT~S05A80PT S05A90PT~S05A100PT 10 .1 .2 .4 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) 2000 JUNCTION CAPACITANCE, ( pF ) INSTANTANEOUS FORWARD CURRENT, (A) 40 FIG. 4 - TYPICAL REVERSE CHARACTERISTICS TJ = 25oC 0.1 20 10 20 10 6 8 10 NUMBER OF CYCLES AT 60HZ 1.0 2 4 10 REVERSE VOLTAGE, ( V ) 20 40 100