U30D05PT CHENMKO ENTERPRISE CO.,LTD THRU ULTRA FSAT RECTIFIER VOLTAGE RANGE 50 - 600 Volts U30D60PT CURRENT 30 Amperes FEATURES * Plastic package has Underwriters Laboratory Flammability Classification 94V-0 * Dual rectifier construction, positive centertap * Glass passivated chip junctions * Low power loss * Low forward voltage, high current capability * High surge current capability * Ultra fast recovery times for high efficiency * High temperature soldering guaranteed : 260oC/10 seconds at terminals TO-247(TO-3P) .645 (16.0) .625 (15.9) .085 (2.16) .075 (1.90) .245 (6.2) .225 (5.7) .135 (3.4) .115 (2.9) .093 (2.30) .076 (1.97) .840 (21.3) .820 (20.8) MECHANICAL DATA .203 (5.16) .193 (4.90) .086 (2.18) .076 (1.93) Case: JEDEC TO-247 molded plastic Terminals: Lead solderable per MIL-STD-750, Method 2026 Polarity: As marked Weight: 5.6 grams ( Approximately ) .095 (2.4) .085 (2.1) .160 (4.1) .140 (3.5) .127 (3.22) .117 (2.97) .030 (.76) .020 (.51) .795 (20.2) .775 (19.7) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60 HZ, resistive or inductive load. For capacitive load, derate current by 20%. .225 (5.7) .205 (5.2) .048 (1.22) .044 (1.12) TO-247(TO-3P) Dimensions in inches and (millimeters) MAXIMUM RATINGES ( At TA = 25oC unless otherwise noted ) RATINGS SYMBOL U30D15PT U30D20PT U30D05PT U30D10PT U30D30PT U30D40PT U30D50PT U30D60PT UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 150 200 300 400 500 600 Volts Maximum RMS Voltage VRMS 35 70 105 140 210 280 350 420 Volts Maximum DC Blocking Voltage VDC 50 100 150 200 300 400 500 600 Maximum Average Forward Rectified Current Volts IO 30.0 Amps Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) IFSM 300 Amps Typical Junction capacitance per leg ( NOTE 1 ) CJ R Typical thermal resistance ( NOTE 2 ) Operating and Storage Temperature Range 200 140 pF o 1.0 JC TJ, TSTG C/W o -65 to +175 C ELECTRICAL CHARACTERISTICS ( At TA = 25oC unless otherwise noted ) CHARACTERISTICS SYMBOL Maximum Instantaneous Forward Voltage at 15.0 A DC Maximum DC reverse current at rated DC blocking voltage per leg Maximum reverse recovery time ( NOTE 3 ) per leg NOTES : 1. 2. 3. 4. U30D05PT U30D10PT VF U30D15PT o TC = 25 C TC = 100oC Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts Thermal resistance from junction to case per leg mounted on heatsink Reverse recovery test conditions : IF = 0.5 A, Ir = -1.0 A, Irr = -0.25 A. Suffix " C " = Common Cathod, Suffix " A " = Common Anode, Suffix " D " = Double. U30D40PT U30D50PT 1.30 UNITS Volts uAmps 500 35 U30D60PT 1.50 10.0 IR trr U30D20PT U30D30PT 0.975 50 nS 2001-6 RATING CHARACTERISTIC CURVES ( U30D05PT THRU U30D60PT ) 22.5 15.0 Single Half Wave 60HZ Resistive or Inductive Load 7.5 0 0 25 50 75 100 125 150 PEAK FORWARD SURGE CURRENT, (A) AVERAGE FORWARD CURRENT, (A) FIG. 1 - TYPICAL FORWARD CURRENT DERATING CURVE 30.0 FIG. 2 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 300 8.3 ms Single Half Sine-Wave (JEDEC Method) 250 200 150 100 50 0 0 2 4 CASE TEMPERATURE, ( oC ) FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARCTERISTICS 40 60 100 FIG. 4 - TYPICAL REVERSE CHARACTERISTICS U30D05PT~U30D20PT 10 U30D50PT&60PT 1.0 PULSE WIDTH=300uS 1% DUTY CYCLE INSTANTANEOUS REVERSE CURRENT, (uA) TJ = 25oC 100 0.1 TJ = 100oC 10 TJ = 75oC 1.0 TJ = 25oC 0.1 0 0.1 0.3 0.5 0.7 0.9 1.1 1.3 1.5 1.7 0 20 INSTANTANEOUS FORWARD VOLTAGE, (V) 40 FIG. 5 - TYPICAL JUNCTION CAPACITANCE TJ =25oC 100 U30D05PT~U30D20PT U30D30PT~U30D60PT 10 .1 .4 60 80 100 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) 1000 JUNCTION CAPACITANCE, ( pF ) INSTANTANEOUS FORWARD CURRENT, (A) 20 100 120 U30D30PT~U30D40PT 6 8 10 NUMBER OF CYCLES AT 60HZ 1.0 4 10 REVERSE VOLTAGE, ( V ) 40 80