KAMN30 SERIES AC - DC POWER MODULE 25 ~ 30W UL / cUL / TUV / CE FEATURES ‧AC/DC POWER MODULE ‧UNIVERSAL INPUT 85 ~ 265 VAC ‧HIGH EFFICIENCY UP TO 86% ‧SHORT CIRCUIT PROTECTION ‧INTERNAL INPUT FILTER ‧2 YEARS WARRANTY ‧MEDICAL SAFETY APPROVED ‧LOW LEAKAGE CURRENT R R H H UL 60950-1 EN 60601-1 a EFF. (min.) EFF. (typ.) CAPACITOR LOAD (max.) UL 60601-1 EN 60950-1 MODEL LIST INPUT VOLTAGE MODEL NO. OUTPUT WATTAGE OUTPUT VOLTAGE OUTPUT CURRENT Single Output Models KAMN3003 85 ~ 265 VAC 25 WATTS + 3.3 VDC 7500 mA 75% 77% 7000μF KAMN3005 85 ~ 265 VAC 30 WATTS + 5 VDC 6000 mA 79% 81% 7000μF KAMN3012 85 ~ 265 VAC 30 WATTS + 12 VDC 2500 mA 83% 85% 7000μF KAMN3015 85 ~ 265 VAC 30 WATTS + 15 VDC 2000 mA 84% 86% 7000μF KAMN3024 85 ~ 265 VAC 30 WATTS + 24 VDC 1250 mA 84% 86% 3500μF ± 1250 mA 82% 84% ± 7000μF 85% Dual Output Models KAMN3012D 85 ~ 265 VAC KAMN3015D 85 ~ 265 VAC 30 WATTS ± 15 VDC ± 1000 mA 83% KAMN30512D 85 ~ 265 VAC 30 WATTS +5 / + 12 VDC +3A / + 1.25A 80% 82% ± 7000μF 7000μF KAMN30524D 85 ~ 265 VAC 30 WATTS +5 / + 24 VDC +3A / + 0.625A 80% 82% 7000μF 30 WATTS ± 12 VDC SPECIFICATION o All Specifications Typical At Nominal Line, Full Load, 25 C Unless Otherwise Noticed GENERAL Characteristics Conditions min. Switching frequency Vi nom, Io nom Isolation voltage Input - Output Isolation resistance Input - Output, @ 500VDC 100 Operating at Vi nom, Io nom -40 Ambient temperature 1) typ. unit max. 65 KHz VAC/VDC 4236/6000 MΩ + 71 o + 85 o C Case temperature Operating at Vi nom, Io nom Derating Vi nom, +61 to + 71 oC Storage temperature Non operational -40 +100 Relative humidity Vi nom, Io nom 20 95 % RH Temperature coefficient Vi nom, Io min ± 0.03 % / oC 2.5 C % / oC o C NOTE1 : Pls refer to DERATING CURVE. www.chinfa.com 2010.03.25 [email protected] P1 KAMN30 SERIES AC - DC POWER MODULE SPECIFICATION o All Specifications Typical At Nominal Line, Full Load, 25 C Unless Otherwise Noticed GENERAL Characteristics MTBF Conditions min. typ. max. unit Bellcore issue 6 @40 oC, GB 3.3V, 5V, 512D & 524D models 703000 Hours 12V, 12D & 15D models 722000 Hours 15V & 24V models 740000 Altitude during operation IEC 60068-2-13 Dimension Cooling Free air convection 4850 Hours m mm L89 x W63.5 x H25 INPUT SPECIFICATIONS Characteristics Rated input voltage Io nom Ta min ... Ta max, Io nom Input voltage range min. Conditions Input current Vi : 115 / 230 VAC, Io nom Rated input current Vi : 100 ~ 240 VAC, Io nom Line frequency Vi nom, Io nom Inrush current Leakage current Vi : 115 / 230 VAC, Io nom typ. max. unit VAC 100 240 AC in 85 265 VAC DC in 120 375 VDC 0.56 / 0.34 A 0.8 - 0.4 A 63 20/40 Hz 47 Normal condition Single fault condition 300 A μA μA 100 OUTPUT SPECIFICATIONS Characteristics Conditions Vi nom, Io nom Output voltage accuracy Minimum load Vi nom max. unit ±1 % dual output models ±2 % 524D model single output models ±4 % dual output models (each output) Line regulation Io nom, Vi min ...Vi max Vi nom, Io min ...Io nom Load regulation typ. single output models min. 0 % 20 % ±1 % single output models ±1 % dual output models ±2 % ±6 % ms Cross regulation (Dual model) Asymmetrical load 20% / 100% FL Hold up time Vi : 115 / 230 VAC, Io nom Turn on time Vi nom, Io nom 1000 ms Rise time Vi nom, Io nom 150 ms Fall time Transient recovery time Vi nom, Io nom 150 ms 1 ms Ripple & noise Vi nom, Io nom, BW = 20MHz 50 mV +10 % External trim ADJ. Range (for single output only) 15/75 Vi nom, 1~0.5 Io nom 2) Efficiency -10 Io = 5% ...100% Vi nom, Io nom, Po / Pi Up to 86%, See model list and typ efficiency curve NOTE 2 : Pls refer to Fig 1 & Table 1 for connection and resistance recommended. CONTROL AND PROTECTION Characteristics Conditions min. Input fuse Internal surge voltage protection www.chinfa.com 2010.03.25 unit max. T2A / 250VAC internal Varistor IEC 61000-4-5 Hiccup mode Output short circuit Rated over load protection typ. Vi nom (see typ current limited curve) 120 160 % [email protected] P2 KAMN30 SERIES AC - DC POWER MODULE SPECIFICATION o All Specifications Typical At Nominal Line, Full Load, 25 C Unless Otherwise Noticed APPROVALS AND STANDARDS UL / cUL UL 60950-1, UL 60601-1 Recognized TUV EN 60950-1, EN 60601-1 CE EN 60601-1-2, EN 55011, EN 61000-6-3, EN 55022 Class B, EN 61000-3-2, EN 61000-3-3 EN 61000-6-2, EN 55024, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5 EN 61000-4-6, EN 61000-4-8, EN 61000-4-11, EN 61204-3 Vibration resistance meet IEC 60068-2-6 (10-500 Hz, 2G, along X, Y, Z each Axis, 60 min for each Axis) Shock resistance meet IEC 60068-2-27 (15G, 11ms, 3 axes, 6 Faces, 3 times for each Face) PHYSICAL CHARACTERISTICS Case size 89 x 63.5 x 25mm ( 3.5 x 2.5 x 0.98 inches) Case material Plastic Weight 250g Potting material Epoxy MECHANISM & PIN CONFIGURATION mm [inch] 63.50 [2.50] 27.90 [1.10] 27.90 [1.10] 3.90 [0.15] 3.85 [0.15] 5 4 3 2-TP 3 x 8 25.00 [0.98] 81.20 [3.20] 89.00 [3.50] 54.50 [2.15] 5.50 [2.20] DIA 1.00 [0.04] 45.20 [1.80] 1 GENERAL TOLERANCE 0.00[0.00] - 30.00[1.18] ±0.30[0.01] 30.00[1.18] - 120.00[4.72] ±0.50[0.02] 2 55.80 [2.20] BOTTOM VIEW PIN ASSIGNMENT GENERAL 4 5 Vo + Vo - Trim Vo + com Vo +12V +24V PIN NO. 1 2 3 SINGLE AC IN AC IN DUAL 12D, 15D AC IN AC IN 512D AC IN AC IN +5V com 524D AC IN AC IN +5V com CIRCUIT SCHEMATIC ‧Block diagram for KAMN30 series with single output AC IN Fuse Vo + Rectifier Line Filter AC IN Inrush Current Switching Limiter and Device Rectifier Vo - Control Circuit www.chinfa.com Fuse Opto Isolation Reference & Error Amp. Trim Vo + Rectifier Line Filter AC IN 2010.03.25 ‧Block diagram for KAMN30 series with dual output Inrush Current Switching Limiter and Device Rectifier com Rectifier AC IN Control Circuit Opto Isolation Vo - Reference & Error Amp. [email protected] P3 KAMN30 SERIES AC - DC POWER MODULE TYP. CURRENT LIMITED CURVE CIRCUIT SCHEMATIC v AC IN Fuse Line Filter Inrush Current Switching Limiter and Device Rectifier Rectifier +5V Rectifier +12V or +24V Output Voltage [ % ] ‧Block diagram for KAMN30512D & KAMN30524D com AC IN Control Circuit Reference & Error Amp. Opto Isolation KAMN3024 Hiccup mode 100 50 t Time DERATING CURVE Ta = -40 oC 75 Power out [ % ] Power out [ % ] 100 0 -40 61 o Temperature [ C ] 100 75 85 71 TYP. EFFICIENCY CURVE 90 115 230 Input Voltage [ VAC ] 265 Fig. 1 Trim connection (For single output only) KAMN3024 EFFICIENCY [ % ] 85 80 5 75 4 70 230 Vac 115 Vac 65 3 Trim 5 Vo - Rext 1 4 Vo + 3 Trim Rext 2 Vo Vo + 60 10 25 50 Power out [ % ] 75 100 Table 1 Typical resistor values for various output voltage adjustment settings and max continuous power Type Rext 1 Vo nom -5% Rext 2 Vo nom -10% Vo nom +5% Vo nom +10% Max continuous power KAMN3003 20KΩ 5.1KΩ 3KΩ 1KΩ 25 W KAMN3005 5.1KΩ 1KΩ 6.8KΩ 2KΩ 30 W KAMN3012 39KΩ 20KΩ 10KΩ 0Ω 30 W KAMN3015 180KΩ 56KΩ 30KΩ 5.1KΩ 30 W KAMN3024 150KΩ 51KΩ 8.2KΩ 0Ω 30 W www.chinfa.com 2010.03.25 [email protected] P4