PAA132 Dual Single-Pole OptoMOS® Relays Blocking Voltage Load Current Max RON PAA132 60 600 1 Description Units VP mA Ω The dual 1-Form-A PAA132 Solid State Relay has two independent, optically coupled, normally open, single-pole relays in a single 8-pin package. Clare's patented OptoMOS architecture makes available the optically coupled technology necessary to activate the output's efficient MOSFET switches while providing a 3750Vrms input-to-output isolation barrier. Control of the isolated output is accomplished by means of a highly effective GaAlAs infrared LED at the input. Features • • • • • • • • • Small 8-Pin Package TTL/CMOS Compatible No Moving Parts High Reliability Arc-Free With No Snubbing Circuits 3750Vrms Input/Output Isolation No EMI/RFI Generation Machine Insertable, Wave Solderable Surface Mount Tape & Reel Version Available By incorporating two independent single-pole relays into a single 8-pin package, the PAA132 saves board space by providing a more compact design solution than two discrete single-pole relays in a variety of applications. Approvals • UL recognized: File Number E76270 • CSA Certified: File Number LR43639-10 • EN/IEC 60950-1 compliant Applications • Instrumentation • Multiplexers • Data Acquisition • Electronic Switching • I/O Subsystems • Meters (Watt-Hour, Water, Gas) • Medical Equipment—Patient/Equipment Isolation • Security • Aerospace • Industrial Controls • Automotive Ordering Information Part # PAA132 PAA132S PAA132STR Description 8 Pin DIP (50/Tube) 8 Pin Surface Mount (50/Tube) 8 Pin Surface Mount (1,000/Reel) Pin Configuration PAA132 Pinout AC/DC Configuration + Control - Switch #1 - Control - Switch #1 + Control - Switch #2 - Control - Switch #2 1 8 2 7 3 6 4 5 Load - Switch #1 Load - Switch #1 Load - Switch #2 Load - Switch #2 Switching Characteristics of Normally Open (Form A) Devices CONTROL ILOAD + 90% 10%+ TON DS-PAA132-R02 www.clare.com TOFF 1 PAA132 Absolute Maximum Ratings (@ 25˚ C) Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation 1 Total Power Dissipation 2 Isolation Voltage, Input to Output Operational Temperature Storage Temperature 1 Derate Linearly 1.33 mw / ºC 2 Derate Linearly 6.67 mw / ºC Ratings 60 5 50 1 150 800 3750 -40 to +85 -40 to +125 Units VP V mA A mW mW Vrms °C °C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Electrical Characteristics Parameter Output Characteristics @ 25°C Load Current Continuous 1 Peak On-Resistance Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics @ 25°C Input Control Current Input Dropout Current Input Voltage Drop Reverse Input Current Common Characteristics @ 25°C Capacitance Input to Output 1 Conditions Symbol Min Typ Max Units t≤10ms IL=600mA VL=60V IL ILPK RON ILEAK - 0.85 - 600 2.0 1.0 1 mA A Ω VL = 50V, f=1MHz TON TOFF COUT - 25 5 2 - ms ms pF IL = 600mA IF = 10mA VR = 5V IF IF VF IR 0.2 0.9 - 1.2 - 2 1.4 10 mA mA V µA - CI/O - 3 - pF IF = 5mA, VL = 10V µA If both poles operate, the load current must be derated so that the package power dissipation value is not exceeded. 2 www.clare.com R02 PAA132 PERFORMANCE DATA* PAA132 Typical LED Forward Voltage Drop (N=50, TA=25ºC, IF=5mA) 35 35 35 30 25 20 15 10 25 20 15 10 5 5 0 0 0.84 0.85 0.86 0.87 0.88 0.89 69.0 PAA132 Typical IF for Switch Dropout (N=50, TA=25ºC, IL=600mA) 25 Device Count (N) 10 5 0 25 20 15 10 5 25 0.45 0.47 0.49 0.51 0.39 0.41 0.43 0.45 0.47 0.49 72.0 PAA132 Typical Turn-On Time (N=50, TA=25ºC, IF=5mA, IL=100mA) 15 10 5 0.75 0.80 0.85 0.90 0.95 1.00 1.05 LED Current (mA) LED Current (mA) Turn-On (ms) PAA132 Typical Turn-Off Time (N=50, TA=25ºC, IL=100mA, IF=5mA) PAA132 Maximum Load Current vs. Temperature (IF=2mA) PAA132 Typical Leakage vs. Temperature (Measured Across Pins 5&6, 7&8) (VP=60V) 0.66 0.016 15 10 5 0.014 0.54 0.48 One Pole Operating Leakage (μA) 20 Load Current (A) 0.42 0.36 0.30 Two Poles Operating 0.29 0.31 0.33 0.35 0.37 0.39 -20 0 20 40 60 80 Temperature (ºC) Turn-Off (ms) PAA132 Typical Blocking Voltage vs. Temperature Turn-On (ms) 68 66 64 62 60 58 -40 -20 0 20 40 60 Temperature (ºC) 80 100 0.006 0.002 -40 70 0.008 0.004 0.41 72 0.010 0.18 0.12 0 0.012 0.24 100 0 -40 120 PAA132 Typical Turn-On vs. Temperature (IL=80mA) 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 IF = 5mA IF = 10mA -40 -20 0 20 40 60 Temperature (ºC) -20 0 20 40 60 80 100 Temperature (ºC) 80 100 Turn-Off (ms) Device Count (N) 70.0 70.5 71.0 71.5 Blocking Voltage (VP) 20 0.51 0.60 Blocking Voltage (VP) 69.5 0 0 0.43 10 On-Resistance (Ω) 15 0.41 15 0 0.83 20 0.39 20 5 1.19 1.21 1.23 1.25 LED Forward Voltage Drop (V) PAA132 Typical IF for Switch Operation (N=50, TA=25ºC, IL=600mA) 25 25 Device Count (N) 1.17 PAA132 Typical Blocking Voltage Distribution (N=50, TA=25ºC) 30 Device Count (N) Device Count (N) Device Count (N) 30 Device Count (N) PAA132 Typical On-Resistance Distribution (N=50, TA=25ºC, IL=600mA, IF=5mA) 0.60 0.55 0.50 0.45 0.40 0.35 0.30 0.25 0.20 0.15 0.10 -40 PAA132 Typical Turn-Off vs. Temperature (IL=80mA) IF = 10mA IF = 5mA -20 0 20 40 60 80 100 Temperature (ºC) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R02 www.clare.com 3 PAA132 PERFORMANCE DATA* PAA132 Typical LED Forward Voltage vs. Temperature 1.3 IF=20mA 1.2 IF=10mA IF=5mA IF=2mA IF=1mA 1.1 1.0 -40 1.2 -20 0 20 40 60 80 Temperature (ºC) 100 120 LED Current (mA) On-Resistance (Ω) IF = 2mA 0.9 0.8 0.7 10 15 20 25 30 35 40 45 0 20 40 60 Temperature (ºC) 80 0 PAA132 Typical Load Current vs. Load Voltage (TA=25ºC, IF=2mA) Load Current (A) 0 -200 -400 -600 -0.6 -0.4 -0.2 0 0.2 Load Voltage (V) 0.4 0.6 10 15 20 25 30 35 40 45 PAA132 Typical IF for Switch Operation vs. Temperature (IL=300mA) PAA132 Typical IF for Switch Dropout vs. Temperature (IL=300mA) 1.2 50 1.0 0.6 0.4 0.8 0.6 0.4 0.2 -20 0 60 20 40 Temperature (ºC) 80 100 0 -40 -20 0 20 40 60 Temperature (ºC) 80 100 PAA132 Energy Rating Curve 400 200 5 LED Forward Current (mA) 0.8 -40 100 0.2 LED Forward Current (mA) 0 -20 0.3 50 0.2 -40 0.4 0 5 1.0 1.0 0.5 0.1 1.2 0.6 Load Current (mA) 0.7 0.6 0 PAA132 Typical On-Resistance vs. Temperature (IL=Max Rated @ Temperature) 1.1 600 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 Turn-Off (ms) IF=50mA Turn-On (ms) 1.5 LED Current (mA) LED Forward Voltage Drop (V) 1.6 1.4 PAA132 Typical Turn-Off vs. LED Forward Current (IL=80mA) PAA132 Typical Turn-On vs. LED Forward Current (IL=80mA) 2.2 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 10μs 100μs 1ms 10ms 100ms 1s 10s 100s Time *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com R02 PAA132 Manufacturing Information Soldering For proper assembly, the component must be processed in accordance with the current revision of IPC/JEDEC standard J-STD-020. Failure to follow the recommended guidelines may cause permanent damage to the device resulting in impaired performance and/or a reduced lifetime expectancy. Washing Clare does not recommend ultrasonic cleaning or the use of chlorinated solvents. MECHANICAL DIMENSIONS 8-Pin DIP Through-Hole Package 2.540 ± 0.127 (0.100 ± 0.005) 6.350 ± 0.127 (0.250 ± 0.005) 0.457 ± 0.076 (0.018 ± 0.003) 9.652 ± 0.381 (0.380 ± 0.015) PC Board Pattern 9.144 TYP. (0.360 TYP.) 9.144 ± 0.508 (0.360 ± 0.020) 8.077 ± 0.127 (0.318 ± 0.005) 8-0.800 DIA. (8-0.031 DIA.) 7.620 ± 0.254 (0.300 ± 0.010) 6.350 ± 0.127 (0.250 ± 0.005) 7.620 ± 0.127 (0.300 ± 0.005) 3.302 (0.130) 2.540 ± 0.127 (0.100 ± 0.005) 7.239 TYP. (0.285) 7.620 ± 0.127 (0.300 ± 0.005) 4.064 Typ (0.160 Typ) Dimensions mm (inches) 0.889 ± 0.102 (0.035 ± 0.004) Recommended PCB Land Pattern 8-Pin Surface Mount Package 9.652 ± 0.381 (0.380 ± 0.015) 2.540 ± 0.127 (0.100 ± 0.005) 6.350 ± 0.127 (0.250 ± 0.005) 8.077 ± 0.127 (0.318 ± 0.005) 4.445 ± 0.127 (0.175 ± 0.005) 9.525 ± 0.254 (0.375 ± 0.010) 0.457 ± 0.076 (0.018 ± 0.003) 2.54 (0.10) 0.635 ± 0.127 (0.025 ± 0.005) 3.302 (0.130) 8.90 (0.3503) 1.65 (0.0649) 7.620 ± 0.254 (0.300 ± 0.010) 0.254 ± 0.127 (0.010 ± 0.0005) 0.65 (0.0255) 4.064 Typ (0.160 Typ) Dimensions mm (inches) 0.889 ± 0.102 (0.035 ± 0.004) R02 www.clare.com 5 MECHANICAL DIMENSIONS Tape and Reel Packaging for 8-Pin Surface Mount Package W = 16.30 max (0.642 max) 330.2 DIA. (13.00 DIA.) Top Cover Tape Thickness 0.102 MAX. (0.004 MAX.) 1 8 Top Cover Tape K0 = 4.90 (0.193) K1 = 4.20 (0.165) Embossed Carrier Embossment P = 12.00 (0.472) Ao = 10.30 (0.406) User Direction of Feed Bo = 10.30 (0.406) Dimensions mm (inches) NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2 For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. 6 Specification: DS-PAA132-R02 ©Copyright 2007, Clare, Inc. OptoMOS® is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 11/9/07