THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM PRODUCT D AT A SHEET CRYSTAL CONTROLLED OSCILLATORS 5.0V HCMOS VCTCXO 14 Pin DIP Crystal Oscillator CW 0643 HTV2AG 27.0M ABSOLU TE MAX IMUM RATING S PARAMETER Storage Temperature TABLE 1.0 UNITS MINIMUM -40 NOMINAL - MAXIMUM 85 UNITS °C Supply Voltage (Vcc) -0.5 - 7 Vdc Control Voltage (Vc) -0.5 - 7 Vdc Frequency Range (Fo) .110 - 12.7999 MHz HTV1AG - Frequency Range (Fo) 12.8 - 60 MHz -0.5 - 0.5 ppm Operating Temperature Range 20 - 40 °C Total Frequency Tolerance -8.0 - 8.0 ppm MODEL SPECIFICATIONS MODEL HTV1G / HTV1AG HTV1G - NOTE HTVxG-Series HTVxAG-Series TABLE 2.0 Frequency Stability vs. Change in Temperature DESCRIPTION 1 MODEL HTV2G / HTV2AG HTV2G - Frequency Range (Fo) .110 - 12.7999 MHz HTV2AG - Frequency Range (Fo) 12.8 - 60 MHz -1.0 - 1.0 ppm 0 - 50 °C -8.5 - 8.5 ppm Frequency Stability vs. Change in Temperature Operating Temperature Range Total Frequency Tolerance 1 MODEL HTV3G / HTV3AG HTV3G - Frequency Range (Fo) .110 - 12.7999 MHz HTV3AG - Frequency Range (Fo) 12.8 - 60 MHz -2.5 - 2.5 ppm 0 - 70 °C -10.0 - 10.0 ppm Frequency Stability vs. Change in Temperature Operating Temperature Range Total Frequency Tolerance 1 Description: The Connor Winfield HTVxGSeries and the HTVxAG-Series are 5.0V HCMOS, hermetically sealed, Voltage Controlled Temperature Compensated Crystal Oscillator (VCTCXO). The HTVxG-Series and the HTVxAG-Series are designed for application requiring very tight frequency stability and low jitter. MODEL HTV4G / HTV4AG HTV4G - Frequency Range (Fo) .110 - 12.7999 MHz HTV4AG - Frequency Range (Fo) 12.8 - 60 MHz Frequency Stability vs. Change in Temperature -5.0 - 5.0 ppm Operating Temperature Range -30 - 70 °C -12.5 - 12.5 ppm Total Frequency Tolerance 5.0V OPERATION 1 OPERATING SPECIFIC ATIONS TABLE 3.0 PARAMETER Frequency Calibration @ 25°C MINIMUM -2.5 NOMINAL - MAXIMUM 2.5 UNITS ppm Frequency Aging First Year -2.0 - 2.0 ppm Frequency Aging Ten Years (Including first year) -5.0 - 5.0 ppm Vdc Supply Voltage (Vcc) 4.75 5.0 5.25 Supply Current (Icc) - 15 35 mA Jitter (BW=10Hz to 20MHz) - - 5 ps rms Jitter (BW=12kHz to 20MHz) Typical Phase Noise SSB Phase Noise at 10Hz offset SSB Phase Noise at 100Hz offset SSB Phase Noise at 1KHz offset SSB Phase Noise at 10KHz offset SSB Phase Noise at 100KHz offset - - 1 ps rms - -70 -100 -125 -135 -145 - dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz MINIMUM NOMINAL MAXIMUM UNITS 0.5 ±8 -15 10k 2.5 - 4.5 ±35 15 - Vdc ppm % Ohm PARAMETER (Vc) NOTE 2 LOW JITTER <1ps RMS FREQUENCY STABILITY:HTV1 HTV1G / HTV1AG: ±0.5ppm: 20 to 40°C HTV2G / HTV2AG: ±1.0ppm: 0 to 50°C HTV3G / HTV3AG: ±2.5ppm: 0 to 70°C HTV4G / HTV4AG: ±5.0ppm: -30 to 70°C FREQUENCY ADJUST INPUT CHARACTERISTICS Control Voltage Frequency Adjust Range (0.5 to 4.5V) Frequency Adjust Linearity Input Impedance FEATURES HERMETICALLY SEALED DIP PACKAGE RoHS COMPLIANT / LEAD FREE ORDERING INFORMATION TABLE 4.0 NOTE 3 HTV2AG TCXO SERIES - 27.0MHz CENTER FREQUENCY Specifications subject to change without notice. DATA SHEET #: Tx170 PAGE 1 OF 2 REV: 00 DATE: 11/07/06 aCopyright 2001 Connor-Winfield all rights reserved. THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM PRODUCT D AT A SHEET CRYSTAL CONTROLLED OSCILLATORS HCMOS OUTPUT CHARACTERISTICS PARAMETER LOAD Voltage HTVxG - Series Current HTVxAG-Series - Current TABLE 5.0 (High) (Low) (Voh) (Vol) MINIMUM 4.2 - (High) (Low) (Ioh) (Ioh) -4 - (High) (Low) (Ioh) (Ioh) -8 45 Duty Cycle at 50% of Vcc Rise / Fall Time 10% to 90% NOMINAL 4.5 - MAXIMUM 15 0.4 UNITS pF Vdc Vdc - 4 mA mA 8 55 5 mA mA % nS 50 3 PACKAGE CHARACTERISTICS NOTE TABLE 6.0 Package Hermetically sealed, metal package. Note: 1) Inclusive of calibration, frequency vs. tem perature stability, supply voltage c hange, load change, shock and vibration, 10 years aging. 2) Frequency calibration at 25°C, Vc = 2.5V, nominal Vcc, af ter one minute warm up time. 3) Positive Slope. Pin Connections Package Outline Pin 1 7 8 14 TABLE 7.0 Connection Control Voltage Ground Output Vcc Dimensional Tolerance: ±.005 (.127mm) ±.02 (.508mm) Solder Profile Test Circuit Temperature 260°C 260°C 220°C 180°C 150°C 120°C 0 120 S Max. CONTROL VOLTAGE Time 10 S 60 S Max. 360 Sec. Max. Specifications subject to change without notice. DATA SHEET #: Tx170 PAGE 2 OF 2 REV: 00 DATE: 11/07/06 aCopyright 2001 Connor-Winfield all rights reserved.