Telecom Performance TCXO / VCTCXO Description Features: TV 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 www.conwin.com US Headquarters: 630-851-4722 European Headquarters: +353-61-472221 50 19 4 08 .2M 08 HZ The Connor-Winfield 5.0x7.0mm Temperature Compensated Crystal Controlled Oscillators and Voltage Controlled Temperature Compensated Crystal Controlled Oscillators are designed for use in S3 Telecom Applications. Through the use of Analog Temperature Compensation, this device is capable of holding sub 1-ppm stabilities over the commercial or the industrial temperature ranges. All models meet +/-4.6ppm accuracies for twenty years. Miniature 5.0 x7.0mm Surface Mount Package 3.3V Operation LVCMOS or Clipped Sinewave Output Logic Frequency Stabilities Available: TV50x / TV60x: +/-0.28ppm TV51x / TV61x: +/-0.50ppm TV52x / TV62x: +/-1.00ppm Temperature Ranges Available: TV5xx Series: 0 to 70°C TV6xx Series: -40 to 85°C Frequency Tolerance: +/-4.60ppm for 20 yrs. Low Jitter <1pS RMS Tape and Reel Packaging RoHS Compliant / Lead Free Recommended for New Designs Matches Vectron’s VTC1-Series Footprint Applications STRATUM 3 Applications Timing Reference Package Layout Pad Connections 0.276 ±0.006 (7.0mm) 0.079 Max. (2.0mm) (Top View) TV504 0808 19.2MHZ 0.197 ±0.006 (5.0mm) 1 2 3 4 Pad 1 1 2 Dimensional Tolerance: ±.005 (.127mm) ±.02 (.508mm) (Bottom View) 0.033 (0.84mm) (4 Places) Control Voltage or N/C Ground Output Supply Voltage (Vcc) 3 4 0.055 (1.40mm) (4 Places) Standard Frequencies Available * 6.4 MHz 9.72 MHz 10.0 MHz 10.24 MHz 12.5 Mhz 12.8 MHz 13.5 MHz 19.44 MHz 20.0 MHz 20.48 MHz 25 MHz 27 MHz 38.88 MHz * Available frequencies from the factory for small quantity orders or quick delivery. Additional frequencies are available. Ordering Information Bulletin Page Revision Date Tx215 1 of 4 01 25 Aug 2008 TV 5 Type: Precision TCXO VCTCXO 5x7mm 4 Pads Temperature Range: 5 = 0 to 70° C 6 = -40 to 85° C Table 1.0 0 Frequency Stability: 0 = +/-0.28 ppm 1 = +/- 0.50 ppm 2 = +/- 1.00 ppm 4 - Features: 2 = TCXO, LVCMOS, 3.3Vdc. 3 = TCXO, Clipped Sinewave, 3.3Vdc. 4 = VCTCXO, LVCMOS, 3.3Vdc. 5 = VCTCXO, Clipped Sinewave, 3.3Vdc. Example: TV504-019.2M = 5x7mm, TCXO, LVCMOS, 3.3Vdc, 0 to 70C, +/-0.28ppm, Output Frequency 19.2MHz 019.2M Output Frequency: Frequency Format -xxx.xM Min.* -xxx.xxxxxxM Max.* *Amount of numbers after the decimal point. M = MHz To order an TV504 with an output frequency of: 6.4 MHz = TV504-006.4M 20 MHz = TV504-020.0M 38.88 MHz = TV504-038.88M Specifications subject to change without notice. All dimensions in inches. © Copyright 2008 The Connor-Winfield Corporation 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630-851-4722 Fax: 630-851-5040 www.conwin.com Absolute Maximum Ratings Table 2.0 Parameter Minimum Nominal Maximum Units Storage Temperature Supply Voltage (Vcc) -55 -0.5 - 125 6.0 °C Vdc Input Voltage (Vcc) -0.5 - Vcc+0.6 Vdc Model Number Output Type TCXO / VCTCXO Frequency Range Frequency Stability Supply Voltage Temperature Range Holdover Stability TV502 LVCMOS TCXO Model Number Output Type TCXO / VCTCXO Frequency Range Frequency Stability Supply Voltage Temperature Range Holdover Stability TV602 LVCMOS TCXO Model Number Output Type TCXO / VCTCXO Frequency Range Frequency Stability Supply Voltage Temperature Range TV 50 19 4 08 .2M 08 HZ Features Model Specifications Model Number Output Type TCXO / VCTCXO Frequency Range Frequency Stability Supply Voltage Temperature Range Notes TV512 LVCMOS TCXO TV612 LVCMOS TCXO Model Number Output Type TCXO / VCTCXO Frequency Range Frequency Stability Supply Voltage Temperature Range TV522 LVCMOS TCXO Model Number Output Type TCXO / VCTCXO Frequency Range Frequency Stability Supply Voltage Temperature Range TV622 LVCMOS TCXO TV503 TV504 Clipped Sinewave LVCMOS TCXO VCTCXO 6.4 to 40 MHz ±0.28ppm 3.3Vdc 0 to 70°C ±0.32ppm TV505 Clipped Sinewave VCTCXO TV603 TV604 Clipped Sinewave LVCMOS TCXO VCTCXO 6.4 to 40 MHz ±0.28ppm 3.3Vdc -40 to 85°C ±0.32ppm TV605 Clipped Sinewave VCTCXO TV513 TV514 Clipped Sinewave LVCMOS TCXO VCTCXO 6.4 to 40 MHz ±0.50ppm 3.3Vdc 0 to 70°C TV613 TV614 Clipped Sinewave LVCMOS TCXO VCTCXO 6.4 to 40 MHz ±0.50ppm 3.3Vdc -40 to 85°C Table 3.0 Notes 1 2 Table 4.0 Notes 1 2 TV515 Clipped Sinewave VCTCXO Table 5.0 Notes TCXO VCTCXO 3.3V Operation LVCMOS Output Clipped Sinewave Output Frequency Stability: TV50x/TV60xSeries+/-0.28ppm TV51x/TV61x-Series+/-0.50ppm TV52x/TV62x-Series+/-1.00ppm Temperature Range: TV5xx-Series 0 to 70°C TV6xx-Series -40 to 85°C Low Jitter <1pS RMS Surface Mount Package Tape and Reel Packing RoHS Compliant / Lead Free Recommended for New Designs Matches Vectron’s VTC1-Series Footprint LVCMOS Test Circuit 1 TV615 Clipped Sinewave VCTCXO Table 6.0 Notes DNC Vcc Supply Voltage DNC DNC 4 Output 3 .01 uF Bypass 15 pF 2 1 N/C - TCXO VC- VCTCXO DNC DNC DNC 1 TV523 TV524 Clipped Sinewave LVCMOS TCXO VCTCXO 6.4 to 52 MHz ±1.00ppm 3.3Vdc 0 to 70°C TV525 Clipped Sinewave VCTCXO TV623 TV624 Clipped Sinewave LVCMOS TCXO VCTCXO 6.4 to 52 MHz ±1.00ppm 3.3Vdc -40 to 85°C TV625 Clipped Sinewave VCTCXO Table 7.0 Notes Clipped Sinewave Test Circuit DNC Vcc Supply Voltage 1 DNC DNC 4 10Kohm .01 uF Bypass 10 pF 2 1 N/C - TCXO VC- VCTCXO DNC DNC DNC Table 8.0 Notes Notes: 1) Frequency stability vs. change in temperature. [±(Fmax – Fmin)/2.Fo]. 2) Inclusive of frequency stability, supply voltage change (±1%), aging, for 24 hours. 1 US Headquarters: 630-851-4722 European Headquarters: +353-61-472221 Bulletin Tx215 Page 2 of 4 Revision Date Specifications subject to change without notice. All dimensions in inches. © Copyright 2008 The Connor-Winfield Corporation Output 3 01 25 Aug 2008 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630-851-4722 Fax: 630-851-5040 www.conwin.com Electrical Specifications for all Models Operating Specifications Table 9.0 Parameter Minimum Nominal Maximum Units Notes TCXO Frequency Calibration @ 25 C -1.00 - 1.00 ppm 1 Supply Voltage Variation. (Vcc±5%) -0.2 - 0.2 ppm Load Coefficient, ±5pF -0.2 - 0.2 ppm Static Temperature Hysteresis -0.4 - 0.4 ppm 2 Total Frequency Tolerance -4.60 - 4.60 ppm 3 4 Supply Voltage (Vcc) 3.135 3.3 3.465 Vdc Supply Current (Icc) - 6 10 mA Period Jitter - 3 5 ps rms Integrated Phase Jitter (BW=12kHz to 20MHz) - 0.3 1.0 ps rms SSB Phase Noise at 10Hz offset - -80 -70 dBc/Hz SSB Phase Noise at 100Hz offset - -110 -100 dBc/Hz SSB Phase Noise at 1KHz offset - -135 -130 dBc/Hz SSB Phase Noise at >10KHz offset - -150 -145 dBc/Hz SSB Phase Noise at >100KHz offset - -150 -150 dBc/Hz Start Up Time - - 10 ms Minimum Nominal Maximum Units 0.3 1.65 3.0 Vdc Input Characteristics For Voltage Control (Pad 1) Parameter Control Voltage Range (Vcc = 3.3V) (Vc) Table 10.0 Frequency Tuning ±10 - - ppm Linearity ±5 - - % Minimum Nominal Maximum Units Slope Table 11.0 Parameter LOAD Current 5 Positive LVCMOS Output Characteristics Voltage Notes TV 50 19 4 08 .2M 08 HZ Features TCXO VCTCXO 3.3V Operation LVCMOS Output Clipped Sinewave Output Frequency Stability: TV50x/TV60xSeries+/-0.28ppm TV51x/TV61x-Series+/-0.50ppm TV52x/TV62x-Series+/-1.00ppm Temperature Range: TV5xx-Series 0 to 70°C TV6xx-Series -40 to 85°C Low Jitter <1pS RMS Surface Mount Package Tape and Reel Packing RoHS Compliant / Lead Free Recommended for New Designs Matches Vectron’s VTC1-Series Footprint LVCMOS Test Circuit Notes - - 15 pF (High) (Voh) 90%Vcc - - Vdc (Low) (Vol) - - 10%Vcc Vdc Vcc Supply Voltage (High) (Ioh) -4 - - mA .01 uF Bypass (Low) (Iol) Duty Cycle at 50% of Vcc Rise / Fall Time 10% to 90% - - 4 mA 45 50 55 % - - 8 ns Minimum Nominal Maximum Units Clipped Sinewave Output Characteristics Parameter - Output Load Resistance - 10K - Ohms Output Load Capacitance - 10 - pF Output Voltage (> 40 MHz) DNC DNC Output 3 15 pF 2 1 N/C - TCXO VC- VCTCXO DNC DNC DNC Table 12.0 Load Output Voltage (< 40 MHz) DNC 4 1.00 0.80 Notes - - - 6 V pk-pk V pk-pk Clipped Sinewave Test Circuit DNC Vcc Supply Voltage DNC DNC 4 10Kohm .01 uF Bypass N/C - TCXO VC- VCTCXO 1) TCXO: Initial calibration @ 25 C. Specifications at time of shipment after 48 hours of operation. 2) Frequency change after reciprocal temperature ramped over the operating range. Frequency measured before and after at 25°C. 3) Inclusive of calibration @ 25 C, frequency vs. change in temperature, change in supply voltage (±5%), load change (±5%), reflow soldering process and 20 years aging. 4) For best in application performance, careful selection of an external power source is critical. Select an external regulator that meets or exceeds to following specifications regarding voltage regulation tolerance, initial accuracy, temperature coefficient, voltage noise, and low voltage noise density. Factory Test Conditions: Initial Accuracy ±2mv, Noise (0.1Hz to 10 KHz) 15uV p-p, Voltage Noise Density = 50nV/? Hz, Temperature Coefficient < 5ppmºC. 5) Additional pull ranges are available; please contact the factory for additional information. 6) Output is AC coupled. Specifications subject to change without notice. All dimensions in inches. © Copyright 2008 The Connor-Winfield Corporation 10 pF 2 1 Notes: Output 3 DNC DNC DNC US Headquarters: 630-851-4722 European Headquarters: +353-61-472221 Bulletin Tx215 Page 3 of 4 Revision Date 01 25 Aug 2008 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630-851-4722 Fax: 630-851-5040 www.conwin.com Package Characteristics Design Recommendations Package Vcc, should have a large copper area for reduced inductance. Connect a 0.01uF bypass capacitor <0.1”(2.54mm) from the pad. 4 8 0.010”(0.254mm) Recommended clearance inductance for internal copper flood. 3 6 9 5 10 4 50 Ohm trace <1”by design Vcc Buffer Environmental Characteristics Vibration: Shock: Soldering: Solderability 1 1 3 2 Top View Table 13.0 Ceramic Surface Mount Package. Table 14.0 Vibration per Mil Std 883E Method 2007.3 Test Condition A Mechanical Shock per Mil Std 883E Method 2002.4 Test Condition B. SMD product suitable for Convection Reflow soldering. Peak temperature 260 C. Maximum time above 220 C, 60 seconds. Solderability per Mil Std 883E Method 2003 Ground Ground, should have a large copper area for reduced inductance. Suggested Pad Layout Ground Top View 4 50 Ohm Trace Without Output Vias Buffer OSC 3 TOP LAYER GROUND LAYER ....... (Top View) BOTTOM LAYER Typical Phase Noise 2 1 Model TV504-019.2MHz Solder Profile Temperature 260°C 260°C 220°C 180°C 150°C 120°C 0 Time 120 S Max. 10 S 60 S Max. 360 Sec. Max. LVCMOS Output Waveform 90% 50% 10% 4-PAD Ceramic Package 0.197x0.295 (5.0x7.0mm) Standard Orientation Tape and Reel Specifications Meets EIA-481A and EIJ-1009B 2000 Pieces/Reel Maximum. Direction of Feed (Customer) 0.020 R. (0.5mm) 0.157 (4mm) 0.079 (2mm) 8.45 Dia. (214.6mm) 0.08 (2.0mm) 0.08 (2.0mm) 0 0.63 (1.6mm) Dia. 0.059 (1.5mm) Dia. 9.84 (250mm) 0.069 (1.75mm) 0.295 (7.5mm) Clipped Sinewave Output Waveform 0.69 (17.53mm) 0.08 (2.0mm) 0.642 (16.30mm) 0.626 (15.90mm) 3.15 (80mm) 200 mV/Div 0.059 (1.5mm) Dia. Minimum 1.0 Dia. (25.4mm) 3° Typical 0.315 (8.0mm) 0.210 (5.33mm) (Ao) SM-MECH09 3° Typical 0.121 (3.07mm) (Ko) Pocket Size 0.31 (7.87mm) (Bo) (Ao) 0.014 (+/-.004) (0.36mm +/-.01) 5.33mm (0.21”) (Bo) 7.87mm (0.31”) (Ko) 3.07mm (0.121”) 16mm (0.630”) Width 8mm (0.315”) Pitch US Headquarters: 630-851-4722 European Headquarters: +353-61-472221 Bulletin Tx215 Page 4 of 4 Revision Date Specifications subject to change without notice. All dimensions in inches. © Copyright 2008 The Connor-Winfield Corporation 01 25 Aug 2008