Spec. No. : C441J3 Issued Date : 2009.03.02 Revised Date : Page No. : 1/7 CYStech Electronics Corp. N-Channel Enhancement Mode Power MOSFET BVDSS ID RDS(ON) MTB06N03J3 30V 80A 6mΩ Features • 100% UIS testing, @VD=15V, L=0.1mH, VG=10V, IL=40V, rated VDS=25V N-CH • Simple Drive Requirement • Repetitive Avalanche Rated • Fast Switching Characteristic • RoHS compliant package & Halogen-free package Symbol Outline MTB06N03J3 TO-252 G：Gate D：Drain S：Source G D S Absolute Maximum Ratings (TC=25°C, unless otherwise noted) Parameter Symbol Limits Drain-Source Voltage Gate-Source Voltage Continuous Drain Current @ TC=25°C Continuous Drain Current @ TC=100°C Pulsed Drain Current (Note 1) Avalanche Current Avalanche Energy @ L=0.1mH, ID=53A, RG=25Ω Repetitive Avalanche Energy@ L=0.05mH (Note 2) Total Power Dissipation @ TC=25℃ Total Power Dissipation @ TC=100℃ Operating Junction and Storage Temperature Range VDS VGS ID ID IDM IAS EAS EAR 30 ±20 80 50 170 53 140 40 83 45 -55~+175 Pd Tj, Tstg Unit V A mJ W °C Note : 1. Pulse width limited by maximum junction temperature 2. Duty cycle ≤ 1% MTB06N03J3 CYStek Product Specification Spec. No. : C441J3 Issued Date : 2009.03.02 Revised Date : Page No. : 2/7 CYStech Electronics Corp. Thermal Data Parameter Thermal Resistance, Junction-to-case, max Thermal Resistance, Junction-to-ambient, max Symbol Rth,j-c Rth,j-a Value 1.8 75 Unit °C/W °C/W Characteristics (TC=25°C, unless otherwise specified) Symbol Min. Typ. Max. Unit Test Conditions 30 1 80 - 1.5 5.3 7.6 25 3 ±100 1 25 6 9.5 - V V nA VGS=0V, ID=250μA VDS = VGS, ID=250μA VGS=±20, VDS=0V VDS =24V, VGS =0V VDS =20V, VGS =0V, Tj=125°C VDS =10V, VGS =10V VGS =10V, ID=30A VGS =5V, ID=24A VDS =5V, ID=24A - 53 30 8 17 22 16 65 10 4753 495 348 1.2 - - 32 12 80 170 1.3 - Static BVDSS VGS(th) IGSS IDSS *ID(ON) *RDS(ON) *GFS Dynamic *Qg(VGS=10V) *Qg(VGS=5V) *Qgs *Qgd *td(ON) *tr *td(OFF) *tf Ciss Coss Crss Rg Source-Drain Diode *IS *ISM *VSD *trr *Qrr μA A mΩ S nC ID=30A, VDS=15V, VGS=10V ns VDS=15V, ID=25A, VGS=10V, RGS=2.7Ω pF VGS=0V, VDS=15V, f=1MHz Ω VGS=15mV, VDS=0V, f=1MHz A V ns nC IF=IS, VGS=0V IF=IS, VGS=0, dIF/dt=100A/μs *Pulse Test : Pulse Width ≤300μs, Duty Cycle≤2% Ordering Information Device MTB06N03J3 MTB06N03J3 Package TO-252 (RoHS compliant & Halogen-free) Shipping Marking 2500 pcs / Tape & Reel B06N03 CYStek Product Specification CYStech Electronics Corp. Spec. No. : C441J3 Issued Date : 2009.03.02 Revised Date : Page No. : 3/7 Characteristic Curves MTB06N03J3 CYStek Product Specification CYStech Electronics Corp. Spec. No. : C441J3 Issued Date : 2009.03.02 Revised Date : Page No. : 4/7 Characteristic Curves(Cont.) MTB06N03J3 CYStek Product Specification CYStech Electronics Corp. Spec. No. : C441J3 Issued Date : 2009.03.02 Revised Date : Page No. : 5/7 Reel Dimension Carrier Tape Dimension MTB06N03J3 CYStek Product Specification CYStech Electronics Corp. Spec. No. : C441J3 Issued Date : 2009.03.02 Revised Date : Page No. : 6/7 Recommended wave soldering condition Product Peak Temperature Soldering Time Pb-free devices 260 +0/-5 °C 5 +1/-1 seconds Recommended temperature profile for IR reflow Profile feature Sn-Pb eutectic Assembly Average ramp-up rate 3°C/second max. (Tsmax to Tp) Preheat 100°C −Temperature Min(TS min) −Temperature Max(TS max) 150°C −Time(ts min to ts max) 60-120 seconds Time maintained above: −Temperature (TL) 183°C − Time (tL) 60-150 seconds Peak Temperature(TP) 240 +0/-5 °C Time within 5°C of actual peak 10-30 seconds temperature(tp) Ramp down rate 6°C/second max. 6 minutes max. Time 25 °C to peak temperature Pb-free Assembly 3°C/second max. 150°C 200°C 60-180 seconds 217°C 60-150 seconds 260 +0/-5 °C 20-40 seconds 6°C/second max. 8 minutes max. Note : All temperatures refer to topside of the package, measured on the package body surface. MTB06N03J3 CYStek Product Specification CYStech Electronics Corp. Spec. No. : C441J3 Issued Date : 2009.03.02 Revised Date : Page No. : 7/7 TO-252 Dimension C A Marking: D B Device Name G F L Date code 3 H E K 2 I Style: Pin 1.Gate 2.Drain 3.Source 1 J 3-Lead TO-252 Plastic Surface Mount Package CYStek Package Code: J3 *: Typical Inches Min. Max. 0.0177 0.0217 0.0650 0.0768 0.0354 0.0591 0.0177 0.0236 0.2441 0.2677 0.2125 0.2283 DIM A B C D E F Millimeters Min. Max. 0.45 0.55 1.65 1.95 0.90 1.50 0.45 0.60 6.20 6.80 5.40 5.80 DIM G H I J K L Inches Min. Max. 0.0866 0.1102 *0.0906 0.0449 0.0346 0.2047 0.2165 0.0551 0.0630 Millimeters Min. Max. 2.20 2.80 *2.30 1.14 0.88 5.20 5.50 1.40 1.60 Notes: 1.Controlling dimension: millimeters. 2.Maximum lead thickness includes lead finish thickness, and minimum lead thickness is the minimum thickness of base material. 3.If there is any question with packing specification or packing method, please contact your local CYStek sales office. Material: • Lead : KFC; pure tin plated • Mold Compound: Epoxy resin family, flammability solid burning class: UL94V-0 Important Notice: • All rights are reserved. Reproduction in whole or in part is prohibited without the prior written approval of CYStek. • CYStek reserves the right to make changes to its products without notice. • CYStek semiconductor products are not warranted to be suitable for use in Life-Support Applications, or systems. • CYStek assumes no liability for any consequence of customer product design, infringement of patents, or application assistance. MTB06N03J3 CYStek Product Specification