- 1N4001 - 1N4007 - TDD- D A Y A - 1.0 AMP. Silicon Rectifiers DO-41 Features High efficiency, Low VF High current capability High reliability High surge current capability Low power loss Mechanical Data Cases: Molded plastic Epoxy: UL 94V-0 rate flame retardant Lead: Pure tin plated, lead free., solderable per MIL-STD-202, Method 208 guaranteed Polarity: Color band denotes cathode end High temperature soldering guaranteed: o 260 C /10 seconds/.375”,(9.5mm) lead lengths at 5 lbs.,(2.3kg) tension Weight: 0.35 gram Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25 oC ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Symbol Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current .375”(9.5mm) Lead Length @TA = 75 oC Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage @1.0A VRRM VRMS VDC 1N 4001 50 35 50 1N 4002 100 70 100 1N 4003 200 140 200 1N 4004 400 280 400 1N 4005 600 420 600 1N 4006 800 560 800 1N 4007 1000 700 1000 BY Units 133 1300 V 910 V 1300 V I(AV) 1.0 A IFSM 30 A VF 1.0 V Maximum DC Reverse Current @ TA=25 C o at Rated DC Blocking Voltage @ TA=125 C IR 5.0 50 uA uA Maximum Full Load Reverse Current ,Full Cycle Average .375”(9.5mm) Lead Length o @TA=75 C HTIR 30 uA Cj RθJA 10 65 -65 to +150 o Typical Junction Capacitance ( Note 1 ) Typical Thermal Resistance ( Note 2 ) Operating and Storage Temperature Range TJ ,TSTG 1. Measured at 1 MHz and Applied Reverse Voltage of 4.0 Volts D.C. Notes: 2. Mount on Cu-Pad Size 5mm x 5mm on P.C.B. o pF C/W o C Factory Address: Taiguan Industrial zone, Yanjinyu Dongjin Rode No.1, XinXiang, HeNan, China 25 - - - TDD- D A Y A FIG.2- TYPICAL REVERSE CHARACTERISTICS FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE 1 10 0.8 4 INSTANTANEOUS REVERSE CURRENT. ( A) AVERAGE FORWARD RECTIFIED CURRENT AMPERES RATINGS AND CHARACTERISTIC CURVES (1N4001 THRU 1N4007) 0.6 Single Phase Half Wave 60Hz Resistive or Inductive Load 0.375" (9.5mm) Lead Length 0.4 0.2 0 0 25 50 75 100 125 150 175 o AMBIENT TEMPERATURE. ( C) Tj=125 0C 1 0.4 0.1 Tj=25 0C 0.04 PEAK FORWARD SURGE CURRENT. (A) FIG.3- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 50 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) 40 8.3ms Single Half Sine Wave JEDEC Method 30 20 10 0 1 2 6 4 8 10 20 60 80 100 40 NUMBER OF CYCLES AT 60Hz FIG.4- TYPICAL JUNCTION CAPACITANCE FIG.5- TYPICAL FORWARD CHARACTERISTICS 20 JUNCTION CAPACITANCE.(pF) 100 INSTANTANEOUS FORWARD CURRENT. (A) 200 Tj=25 0C 60 40 20 10 6 4 2 1 0.1 0.2 0.4 1 2 4 10 20 40 100 10 4 2 1 0.4 0.2 Tj=25oC Pulse Width=300 s 1% Duty Cycle 0.1 0.04 0.02 0.01 0.6 0.8 1.0 1.2 1.4 1.5 FORWARD VOLTAGE. (V) REVERSE VOLTAGE. (V) Factory Address: Taiguan Industrial zone, Yanjinyu Dongjin Rode No.1, XinXiang, HeNan, China 26