W005 THRU W10 Features • • • • 1.5Amp Glass Passivated Bridge Rectifier 50 to 1000 Volts High Current Capability Ideal for printed circuit boards High Temperature Soldering: 260 oC for 10 seconds Reliable low cost construction technique results in inexpensive products Maximum Ratings • • • WOM Operating Temperature: -55°C to +150°C Storage Temperature: -55°C to +150°C For capacitive load. Derate current by 20% A B MCC Part Number W005 W01 W02 W04 W06 W08 W10 Maximum Recurrent Peak Reverse Voltage 50V 100V 200V 400V 600V 800V 1000V Maximum RMS Voltage 35V 70V 140V 280V 420V 560V 700V Maximum DC Blocking Voltage 50V 100V 200V 400V 600V 800V 1000V C D F AC + Electrical Characteristics @ 25°C Unless Otherwise Specified Average Forward Current Peak Forward Surge Current Maximum Instantaneous Forward Voltage Maximum DC Reverse Current At Rated DC Blocking Voltage IF(AV) 1.5 A AC TC = 50°C E E IFSM 50A VF 1.10V IR 10µA 500uA 8.3ms, half sine IFM = 1.0A; TC = 25°C TC = 25°C TC = 125°C DIMENSIONS DIM A B C D E F INCHES MIN ------1.000 1.200 .180 .030 MAX .358 .225 ----.220 .032 MM MIN ----------25.40 30.50 4.60 0.76 MAX 9.10 5.70 ----5.60 0.81 NOTE W005G thru W10G FIG.1- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PER BRIDGE ELEMENT 40 30 20 10 0 1.6 AVERAGE FORWARD CURRENT. (A) PEAK FORWARD SURGE CURRENT. (A) 50 1 2 10 20 40 60 1.4 1.2 1.0 .8 .6 .4 .2 0 100 FIG.2- MAXIMUM FORWARD CURRENT DERATING CURVE 40 20 80 60 120 100 140 o AMBIENT TEMPERATURE. ( C) NUMBER OF CYCLES AT 60Hz FIG.4- TYPICAL REVERSE CHARACTERISTICS PER BRIDGE ELEMENT FIG.3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER BRIDGE ELEMENT 20 10 1.0 INSTANTANEOUS REVERSE CURRENT. ( A) INSTANTANEOUS FORWARD CURRENT. (A) 10 Tj=25oC Pulse Width=300 s 1% Duty Cycle 0.1 Tj=100 0C 1.0 .10 Tj=25 0C 0.01 0 0.2 0.4 0.6 0.8 FORWARD VOLTAGE. (V) 1.0 1.2 1.4 .01 0 20 40 60 80 100 120 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) 140 160