FRCE Series Metal Hood FRC5 Series Shielded Type for EMI Suppression The FRCE series hood is used for the FRC5 series socket connectors. It is made of aluminum alloy. It provides complete EMI protection to the connectors. ●Applicable connectors : No. of contacts 26, 34, 50 FRC5-A □26- □TON, FRC5-A □34- □TON, FRC5-A□50-□T□N ●The mating connector of the FRCE series socket with hood is a header without a lock. FRC5-C26 □ □□T-ON, FRC5-C34□ □□TON, FRC5-C50□□□T-□N Ｄ FRCE MATERIAL/FINISH Hood Lock screws Cable clamp Clamp clip Aluminum cast/Non-conductive paint finish (color : gray) Steel/Nickel plating Steel/Nickel plating Steel/Nickel plating ● 1● FRCE Series Unit : mm D A H (Boot ID) C Ｄ Attached to Panel 7.85 M3 × 0.5 Thread FRCE Attached to Socket Connector 9.4 B 12.4 P/N FRCE-26H1 FRCE-34H1 A 57.6 67.76 B 37.59 47.75 C 35 35 D 10×13 10×15 E 38.60 48.76 F 47.60 57.76 G 30.48 40.64 H 10.5 11.0 FRCE-50H1 88.08 68.07 40 10×18 69.08 78.08 60.96 13.0 Panel and PCB Mounting Dimensions M3 × 0.5 Thread 10.4 PCB +0 -0.4 φ0.8 10.4 +0 -0.4 Connector Panel PCB R1.5 max. E F 2.54 G R1.5 max. M3 × 0.5 Thread E F Panel 13 max +0.5 (22.8 -0 ) +0.5 2.54 Right angle header 26.5 -0 Straight header 2 ● ●