GBJ15005 THRU GBJ1510 GLASS PASSIVATED BRIDGE RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 15.0 Ampere FEATURES Glass passivated chip junction Reliable low cost construction utilizing molded plastic technique ● Ideal for printed circuit board ● Low reverse leakage current ● Low forward voltage drop ● High surge current capabiliy GBJ ● ● MECHANICAL DATA ● ● ● ● Case:Molded plastic, GBJ Terminals : Terminals: Leads solderable per MIL-STD-202 method 208 guaranteed Epoxy: UL 94V-0 rate flame retardant Mounting Position: Any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 C ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%. Symbols GBJ 15005 GBJ 1501 GBJ 1502 GBJ 1504 GBJ 1506 GBJ 1508 GBJ Units 1510 Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Rectified Current with Heatsink at TC = 100 OC I(AV) 15 A Peak Forward Surge Current, 8.3 ms Single Half-Sine -Wave superimposed on rated load (JEDEC Method) IFSM 200 A Maximum Forward Voltage at 7.5 A DC and 25 OC VF 1.1 V Maximum Reverse Current at TA = 25 C at Rated DC Blocking Voltage TA = 125 OC IR 10 500 µA CJ 60 pF Typical Thermal Resistance 2) RθJC 0.8 Operating and Storage Temperature Range TJ,TS -55 to +150 Parameter O Typical Junction Capacitance 1) 2) 1) Measured at 1 MHz and applied reverse voltage of 4 VDC. Thermal resistance from junction to case with device mounted on 300 mm X 300 mm X 1.6 mm Cu plate heatsink. C/W O C O GBJ15005 THRU GBJ1510 RATINGS AND CHARACTERISTIC CURVES Resistive or inductive load With heatsink IF, INSTANTANEOUS FORWARD CURRENT (A) IO, AVERAGE RECTIFIED CURRENT (A) 15 10 5.0 Without heatsink 0 40 120 80 TC, CASE TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve 25 0 160 Cj, JUNCTION CAPACITANCE (pF) 200 100 Tj = 25°C 0 1 Tj = 25°C Pulse width: 300µs 10 1.0 0.1 0.01 0 0.4 1.2 1.6 2.0 0.8 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 100 Single Half-Sine Wave (JEDEC Method) 10 Tj = 25°C 10 1.0 100 f = 1 MHz 1.0 NUMBER OF CYCLES AT 60 Hz Fig. 3 Maximum Non-Repetitive Surge Current IR, INSTANTANEOUS REVERSE CURRENT (µA) IFSM, PEAK FWD. SURGE CURRENT (A) 0 100 10 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance 1000 Tj = 125°C 100 Tj = 100°C 10 Tj = 50°C 1.0 Tj = 25°C 0.1 0 20 40 60 80 100 120 PERCENT OF PEAK REVERSE VOLTAGE (%) Fig. 5 Typical Reverse Characteristics 100