DIOTECH MURF1615CT

MURF1605CT THRU MURF1660CT
SUPER FAST RECOVERY SILICON RECTIFIER
Reverse Voltage - 50 to 600 Volts
Forward Current - 16.0 Ampere
FEATURES
ITO-220AB
The plastic package carries Underwriters Laboratory
Flammability Classification 94V-0
● Super fast switching for high efficiency
● Low reverse leakage
● High forward surge current capability
● High temperature soldering guaranteed:
250 C/10 seconds,0.25 ”(6.35mm) from case
●
● Case: JEDEC ITO-220AB molded plastic body
● Terminals: Plated leads, solderable per MIL-STD-750,
Method 2026
● High temperature soldering guaranteed:
.059(1.5)
.043(1.1)
.030(0.76)
.020(0.51)
.112(2.84)
.088(2.24)
250 C/10 seconds, 0.25" (6.35mm) from case
Polarity: As marked
Mounting Position: Any
Mounting Torque: 10 in-lbs maximum
Weight: 0.08 ounce, 2.24 grams
o
.189(4.8)
.173(4.4)
.118(3.0)
.106(2.7)
.610(15.5)
.571(14.5)
.157(4.0)
.142(3.6)
MECHANICAL DATA
●
●
●
●
.138(3.5)
.122(3.1)
.118(3.0)
.102(2.6)
.406(10.3)
.386(9.8)
.071(1.8)
.055(1.4)
.571(14.5)
.531(13.5)
.114(2.9)
.098(2.5)
.030(0.76)
.020(0.51)
Dim ensions in inches and (m illim eters)
PIN 1 -
+
PIN 3 -
PIN 2
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 C ambient temperature unless otherwise specified.
Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%.
Characteristic
Symbol
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
RMS Reverse Voltage
MURF
MURF
MURF
MURF
1605CT 1610CT 1615CT 1620CT
MURF
1630CT
MURF
MURF
1640CT 1660CT Unit
VRRM
VRWM
VR
50
100
150
200
300
400
600
V
VR(RMS)
35
70
105
140
210
280
420
V
Average Rectified Output Current
@TC = 105°C
IO
16
A
Non-Repetitive Peak Forward Surge
Current 8.3ms Single half sine-wave
superimposed on rated load (JEDEC Method)
IFSM
125
A
Forward Voltage
VFM
@IF = 8.0A
Peak Reverse Current
@TA = 25°C
At Rated DC Blocking Voltage @TA = 125°C
0.95
1.3
1.7
10
500
IRM
V
µA
Reverse Recovery Time (Note 1)
trr
35
50
nS
Typical Junction Capacitance (Note 2)
Cj
80
60
pF
Operating and Storage Temperature Range
Tj, TSTG
Note: 1. Measured with IF = 0.5A, IR = 1.0A, IRR = 0.25A.
2. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C.
-65 to +150
°C
MURF1605CT THRU MURF1660CT
RATINGS AND CHARACTERISTIC CURVES
IF, INSTANTANEOUS FORWARD CURRENT (A)
I(AV), AVERAGE FORWARD CURRENT (A)
20
16
12
8
4
0
0
50
100
100
1605 - 1620
1660
1.0
Pulse width = 300µs
2% duty cycle
0.1
0
150
TC, CASE TEMPERATURE (°C)
Fig. 1 Forward Current Derating Curve
150
75
1.8
100
10
Tj = 25°C
f = 1.0MHz
100
MURF1605CTMURF1620CT
MURF1640CTMURF1660CT
10
1
1.2
400
8.3 ms single half-sine-wave
JEDEC method
0
0.6
VF, INSTANTANEOUS FORWARD VOLTAGE (V)
Fig. 2 Typical Forward Characteristics
Cj, CAPACITANCE (pF)
IFSM, PEAK FORWARD SURGE CURRENT (A)
225
1630 - 1640
10
0.1
1.0
10
VR, REVERSE VOLTAGE (V)
Fig. 4 Typical Junction Capacitance
NUMBER OF CYCLES AT 60Hz
Fig. 3 Maximum Non-Repetitive Surge Current
trr
50Ω NI (Non-inductive)
(-)
10Ω NI
Device
Under
Test
(+)
+0.5A
(-)
Pulse
Generator
(Note 2)
50V DC
Approx
1.0Ω
NI
Oscilloscope
(Note 1)
0A
-0.25A
(+)
Notes:
1. Rise Time = 7.0ns max. Input Impedance = 1.0MΩ, 22pF.
2. Rise Time = 10ns max. Input Impedance = 50Ω.
-1.0A
Set time base for 5/10ns/cm
Fig. 5 Reverse Recovery Time Characteristic and Test Circuit
100