ES3A THRU ES3J SURFACE MOUNT SUPER FAST RECTIFIER Reverse Voltage - 50 to 600 Volts Forward Current - 3.0 Ampere FEATURES ● ● ● ● ● ● ● SMC ( DO-214AB ) The plastic package carries Underwriters Laboratory Flammability Classification 94V-0 For surface mounted applications .128(3.25) .108(2.75) Super fast switching for high efficiency Low reverse leakage Built-in strain relief,ideal for automated placement High forward surge current capability High temperature soldering guaranteed: 250 C/10 seconds at terminals .245(6.22) .220(5.59) .280(7.11) .260(6.60) .012(.305) .006(.152) .103(2.62) .079(2.00) MECHANICAL DATA Case: JEDEC DO-214AB molded plastic body Terminals: Solder plated , solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight:0.007 ounce, 0.24grams .060(1.52) .030(0.76) .320(8.13) .305(7.75) .008(.203) .002(.051) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 C ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Symbol ES3A ES3B ES3C ES3D ES3E ES3G ES3J Unit VRRM VRWM VR 50 100 150 200 300 400 600 V VR(RMS) 35 70 105 140 210 280 420 V Average Rectified Output Current @TC = 100°C IO 3.0 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IFSM 100 A Forward Voltage VFM @IF = 3.0A Peak Reverse Current @TA = 25°C At Rated DC Blocking Voltage @TA = 125°C 0.95 1.3 1.7 V IRM 10 500 µA Reverse Recovery Time (Note 1) trr 35 nS Typical Junction Capacitance (Note 2) Cj 45 pF Tj, TSTG -55 to +150 °C Operating and Storage Temperature Range Note: 1. Measured with IF = 0.5A, IR = 1.0A, IRR = 0.25A. 2. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. ES3A THRU ES3J RATINGS AND CHARACTERISTIC CURVES IF, INSTANTANEOUS FORWARD CURRENT (A) IO, AVERAGE RECTIFIED CURRENT (A) 3.0 2.0 1.0 0 25 75 50 100 125 150 175 10 1.0 0.1 0.01 Tj = 25°C Pulse Width: 300µs 0 120 Single Half-Sine-Wave (JEDEC Method) 100 80 60 40 20 0 1 10 0.4 0.8 1.2 1000 NUMBER OF CYCLES AT 60Hz Fig. 3 Surge Current Derating Curve Tj = 125°C 100 10 Tj = 25°C 1.0 0 100 40 80 (+) (-) +0.5A 10Ω NI Device Under Test (-) Pulse Generator (Note 2) 50V DC Approx 1.0Ω NI Oscilloscope (Note 1) 120 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 4 Typical Reverse Characteristics trr 50Ω NI (Non-inductive) 1.6 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics IR, INSTANTANEOUS REVERSE CURRENT (A) IFSM, PEAK FORWARD SURGE CURRENT (A) TT, TERMINAL TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve 0A -0.25A (+) Notes: 1. Rise Time = 7.0ns max. Input Impedance = 1.0MΩ, 22pF. 2. Rise Time = 10ns max. Input Impedance = 50Ω. -1.0A Set time base for 50/100 ns/cm Fig. 5 Reverse Recovery Time Characteristic and Test Circuit