ES2A THRU ES2J SURFACE MOUNT SUPER FAST RECTIFIER Reverse Voltage - 50 to 600 Volts Forward Current - 2.0 Ampere FEATURES SMB ( DO-214AA ) The plastic package carries Underwriters Laboratory Flammability Classification 94V-0 ● For surface mounted applications ● ● Super fast switching for high efficiency .083(2.11) .075(1.91) Low reverse leakage ● Built-in strain relief,ideal for automated placement ● High forward surge current capability ● High temperature soldering guaranteed: 250℃/10 seconds at terminals ● .155(3.94) .130(3.30) .185(4.70) .160(4.06) .012(.305) .006(.152) .096(2.44) .084(2.13) MECHANICAL DATA Case: JEDEC DO-214AA molded plastic body Terminals: Solder plated , solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight:0.005 ounce, 0.138 grams .060(1.52) .030(0.76) .008(.203) .002(.051) .220(5.59) .200(5.08) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 C ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Symbol ES2A ES2B ES2C ES2D ES2E ES2G ES2J Unit VRRM VRWM VR 50 100 150 200 300 400 600 V VR(RMS) 35 70 105 140 210 280 420 V Average Rectified Output Current @TC = 100°C IO 2.0 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IFSM 50 A Forward Voltage VFM @IF = 2.0A Peak Reverse Current @TA = 25°C At Rated DC Blocking Voltage @TA = 100°C 0.95 1.3 1.7 V IRM 10 350 µA Reverse Recovery Time (Note 1) trr 35 nS Typical Junction Capacitance (Note 2) Cj Operating and Storage Temperature Range Tj, TSTG Note: 1. Measured with IF = 0.5A, IR = 1.0A, IRR = 0.25A. 2. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. 25 20 -55 to +150 pF °C ES2A THRU ES2J RATINGS AND CHARACTERISTIC CURVES IF, INSTANTANEOUS FORWARD CURRENT (A) IO, AVERAGE FORWARD CURRENT (A) 2.4 2.0 1.6 1.2 0.8 0.4 0 25 75 50 100 125 150 175 10 Tj = 25°C Pulse width = 300µs 1.0 0.1 0.01 60 Single Half-Sine-Wave (JEDEC Method) 50 40 30 20 10 0 1 10 0.4 0.8 1.2 100 NUMBER OF CYCLES AT 60Hz Fig. 3 Surge Current Derating Curve 1000 Tj = 125°C 100 10 Tj = 25°C 1.0 0.1 0 40 80 (+) (-) +0.5A 10Ω NI Device Under Test (-) Pulse Generator (Note 2) 50V DC Approx 1.0Ω NI Oscilloscope (Note 1) 120 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 4 Typical Reverse Characteristics trr 50Ω NI (Non-inductive) 1.6 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics IR, INSTANTANEOUS REVERSE CURRENT (µA) IFSM, PEAK FORWARD SURGE CURRENT (A) TT, TERMINAL TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve 0 0A -0.25A (+) Notes: 1. Rise Time = 7.0ns max. Input Impedance = 1.0MΩ, 22pF. 2. Rise Time = 10ns max. Input Impedance = 50Ω. -1.0A Set time base for 50/100 ns/cm Fig. 5 Reverse Recovery Time Characteristic and Test Circuit