CAPACITORS ALUMINIUM ELECTROLYTIC HIGH TEMP. DJ3 Miniaturised case sizes (compatible with CEBM) SECTION 1 Long-life grade (up to 2000 hours @105°C) Lowest cost high performance electrolytic The DJ3 offers many excellent characteristics for a multitude of roles. Its basic specification of high-temperature and small size allows use as a switching power-supply output capacitor. Smaller values are usable in all high-temperature circuits, for example, in monitors and automotive applications. At lower temperatures, DJ3s offer life-times of well over 10-15 years, for high reliability equipment. SPECIFICATION Item Performance Characteristics Rated Working Voltage Range 6.3 to 100V DC 160 to 450V DC Operating Temperature Range -40 to +105°C -25 to +105°C Nominal Capacitance Range 0.1 to 15000µF 0.47 to 220µF Capacitance Tolerance ± 20%(120Hz, +20°C) Leakage Current l ≤ 0.01CV or 3[µA] whichever is greater l ≤ 0.06CV after 2 minutes application of rated working voltage at +20°C tan ∂ (120Hz, +20°C) Working voltage [V] 6.3 10 16 25 35 50 63 100 tan ∂ max. 0.22 0.19 0.16 0.14 0.12 0.10 0.09 0.07 Working voltage [V] 160 200 250 350 400 450 tan ∂ max. 0.15 0.15 0.15 0.20 0.24 0.24 For capacitance value > 1000µF, add 0.02 per extra 1000µF Maximum Permissible Ripple Refer to standard products table (120Hz, +105°C) Current Correction factor for frequency Freq. [Hz] 60 120 1K 10K 100K W.V. [VDC] CAP [µF] 0.1 ~ 330 0.85 1 1.30 1.40 1.55 6.3 ~ 50 470 ~ 3300 0.95 1 1.15 1.20 1.25 ≥ 4700 0.95 1 1.10 1.20 1.20 0.47 ~ 33 0.75 1 1.55 1.65 1.80 63 ~ 100 47 ~ 220 0.75 1 1.40 1.60 1.65 ≥ 330 0.80 1 1.30 1.35 1.40 ≥ 160 1 ~ 220 0.70 1 1.30 1.70 1.70 OUTLINE DRAWING 15 min L+1 Dø 5 6.3 8 P 2.0 2.5 3.5 dø 0.5 5 min 10 12.5 16 18 5.0 5.0 7.5 7.5 0.6 0.8 P ± 0.5 dø Vinyl Sleeve D ø+0.5 ORDERING INFORMATION DJ3 Range 100 16 TA Capacitance µf Voltage Options TA = Tape/Ammo Blank = Loose TA = 5mm pitch. For others add pitch e.g. TA 2mm = 2mm pitch. 48 Fax: 01371 875075 www.dubilier.co.uk Tel: 01371 875758 CAPACITORS ALUMINIUM ELECTROLYTIC HIGH TEMP. DJ3 Low Temperature Characteristics Impedance ratio max. at 120Hz Working voltage [V] 6.3 10 16 25 35 50 63 100 -25°C/+20°C 4 3 2 2 2 2 2 2 -40°C/+20°C 8 6 4 3 3 3 3 3 Working voltage [V] 160 200 250 350 400 450 -25°C/+20°C 3 3 3 6 6 15 For capacitance value > 1000µF:Add 0.5 per extra 1000µF for -25°C/+20°C Add 1.0 per extra 1000µF for -40°C/+20°C Washability 5 mins in Freon TE, Arklone AM or equivalents High Temperature Loading Test Conditions Duration 2000 hours (1000 hours for ≤ ø8mm. products) Ambient temperature +105°C Applied voltage DC voltage with maximum permissible ripple current specified at +105°C (Sum of the DC voltage and super-imposed peak AC voltage for maximum permissible ripple current should be equal to rated DC working voltage) Post test requirements at +20°C Leakage current ≤ Initial specified value Capacitance change ≤ ± 20% of initial measured value tan ∂ ≤ 200% of initial specified value Shelf Life Test Conditions Post test requirements at +20°C Duration Ambient temperatureSame limits for high temperature loading Applied voltage 49 Fax: 01371 875075 www.dubilier.co.uk Tel: 01371 875758 SECTION 1 SPECIFICATION CAPACITORS ALUMINIUM ELECTROLYTIC HIGH TEMP. DJ3 SECTION 1 RANGE HIGH VOLTAGE RANGE WV 6.3 10 16 25 35 50 63 100 160 µF øxl/mm øxl/mm øxl/mm øxl/mm øxl/mm øxl/mm øxl/mm øxl/mm øxl/mm 0.1 5x11 6.3x11 0.22 5x11 6.3x11 0.33 5x11 6.3x11 0.47 5x11 6.3x11 1.0 5x11 6.3x11 2.2 5x11 6.3x11 3.3 5x11 8x11.5 4.7 5x11 8x11.5 10 5x11 6.3x11 10x12.5 22 5x11 6.3x11 8x11.5 10x20 33 5x11 6.3x11 6.3x11 10x12.5 12.5x20 47 5x11 6.3x11 6.3x11 8x11.5 10x16 12.5x25 100 5x11 6.3x11 6.3x11 8x11.5 8x11.5 10x17 12.5x20 16x25 220 6.3x11 8x11.5 8x11.5 10x12.5 10x16 10x20 16x25 18x35.5 330 6.3x11 8x11.5 8x11.5 10x12.5 10x16 10x20 12.5x20 16x25 470 8x11.5 8x11.5 10x12.5 10x16 10x20 12.5x20 12.5x20 16x31.5 1000 10x12.5 10x16 10x20 12.5x20 12.5x25 16x25 16x31.5 2200 12.5x20 12.5x20 12.5x25 16x25 16x31.5 18x35.5 3300 12.5x20 12.5x25 16x25 16x31.5 18x35.5 4700 16x25 16x25 16x31.5 18x35.5 18x40 6800 16x25 16x31.5 18x35.5 10000 16x31.5 18x35.5 15000 18x35.5 WV 200 µF 0.47 1 6.3x11 2.2 6.3x11 3.3 8x11.5 4.7 10x12.5 10 10x16 22 12.5x20 33 12.5x20 47 12.5x25 100 16x25 250 350 400 450 6.3x11 6.3x11 8x11.5 10x12.5 10x12.5 10x20 12.5x20 12.5x25 16x25 16x31.5 8x11.5 10x12.5 10x12.5 10x16 10x20 12.5x20 16x25 16x25 16x31.5 8x11.5 10x12.5 10x12.5 10x20 10x20 12.5x25 16x25 16x31.5 18x35.5 8x11.5 10x16 10x20 12.5x20 12.5x25 16x25 16x31.5 18x35.5 RIPPLE CURRENTS (mA, rms) AT 105˚C, 120Hz UF/Volts 50v 63v 100v 160v 200v 250v 400v 450v 0.47uf 6.3v 10v 16v 7 8 10 12 12 12 18 11 1.0uf 12 12 15 17 17 17 30 19 2.2uf 18 20 22 25 25 29 35 29 3.3uf 25 24 29 36 36 42 41 35 4.7uf 30 34 37 43 50 50 57 50 10uf 50 55 65 70 80 80 97 75 22uf 33uf 70 47uf 25v 35v 60 65 75 90 115 130 135 155 170 110 75 85 105 110 160 175 190 190 200 205 245 250 85 90 104 125 145 210 230 220 230 100uf 100 110 135 145 190 210 260 385 330 335 340 220uf 165 180 235 250 315 400 465 590 500 515 525 330uf 193 255 285 355 440 535 650 720 850 920 470uf 280 305 395 470 580 730 800 875 980 1200 1000uf 470 570 700 821 995 1110 2200uf 930 1010 1150 1230 1450 1340 3300uf 1100 1220 1350 1450 1660 4700uf 1320 1410 1560 1690 6800uf 1490 1610 1790 10000uf 1830 1980 15000uf 2280 50 Fax: 01371 875075 www.dubilier.co.uk Tel: 01371 875758