CAPACITORS ALUMINIUM ELECTROLYTIC MINIATURE RADIAL CEK 7mm high case sizes SECTION 1 The CEK is a high-quality radial electrolytic capacitor featuring the industry-standard "K" case size. Applications include automotive, telecommunications, radio and other designs requiring low profile cases. 5mm pitch and SL (straight lead) widely stocked. SPECIFICATION Item Performance Characteristics Operating Temperature Range -40 to +85°C Rated Working Voltage Range 4 to 50V DC Nominal Capacitance Range 0.1 to 470µF Capacitance Tolerance ± 20% (120Hz, +20°C) Leakage Current l - 0.01CV or 3[µA] whichever is greater measured after 2 minutes application of rated working voltage at +20°C. tan ∂ Working Voltage [V] 4 6.3 10 16 25 35 50 (120Hz, +20°C) tan∂ max. 0.35 0.24 0.20 0.16 0.14 0.12 0.10 Characteristics at Low Temp. Impedance ratio max. at 120Hz Working Voltage [V] 4 6.3 10 16 25 35 50 -25°C/±20°C 6 4 3 2 2 2 2 -40°C/+20°C 12 8 6 4 4 3 3 High Temperature Loading Test conditions Duration1000 hours Ambient temperature +85°C Applied voltage Rated DC working voltage Post test requirements at +20°C Leakage current ≤ Initial specified value Capacitance change ≤ ± 20% of initial measured value tan ∂ ≤ 200% of initial specified value Shelf Life Test conditions Duration 500 hoursPost test requirements at +20°C. Ambient temperature +85°C Same limits for temperature loading. Applied voltage (None) ORDERING INFORMATION CEK 10 16 TA Range Capacitance µF Voltage V Options: TA = Tape/Ammo-box SL = Straight Lead Blank = 5mm Pitch TA = 5mm, e.g. TA 2mm = 2mm pitch. Note: Always add SL if you require straight lead pitch e.g. CEK 10 16 SL as the standard CEK 10 16 is 5mm pitch. 38 Fax: 01371 875075 www.dubilier.co.uk Tel: 01371 875758 CAPACITORS ALUMINIUM ELECTROLYTIC MINIATURE RADIAL CEK RANGE & CASE SIZE SECTION 1 V6.3 10 162535 5063 µF øxl/mm øxl/mm øxl/mm øxl/mm øxl/mm øxl/mm øxl/mm 0.1 4x7 4x7 0.22 4x7 4x7 0.33 4x7 4x7 0.47 4x7 4x7 1.0 4x7 4x7 2.2 4x7 4x7 3.3 4x7 4x7 4.7 4x7 4x7 4x7 5x7 10 4x7 4x7 5x7 22 4x7 4x7 4x7 5x7 5x7 33 4x7 4x7 4x7 5x7 47 4x7 4x7 5x7 6x7 100 5x7 5x7 6x7 220 6x7 6x7 8x9 330 6.3x7 8x7 470 8x7 PERMISSIBLE RIPPLE CURRENT STANDARD PRODUCTS V6.3 10 162535 µF 0.1 0.22 0.33 0.47 1.0 2.2 3.3 4.7 24 24 10 29 36 22 34 38 44 51 57 33 42 47 57 63 47 50 59 68 75 100 77 80 90 220 80 90 100 5063 1 2 3 5 10 19 24 29 44 1 2 4 6 13 21 26 33 OUTLINE DRAWING L+1 15 min 5 min P Vinyl Sleeve d ø Dø +0.5 ± 0.5 Dø 4 5 6.3 8 P 1.5 2.0 2.5 3.5 dø 0.45 0.5 Availability is in both 5mm Cropped and Formed and SL Straight Lead Natural Pitch. Dimensions in mm 39 Fax: 01371 875075 www.dubilier.co.uk Tel: 01371 875758