RESISTORS PRECISION METAL FILM DMR 0.6W in 0.25W size 1%, E-96 values The DMR range is available in power ratings from 1/6W to 2W. The DMR25 offers a nominal 0.6W power rating in a standard 1/4W size. Resistors are manufactured to JIS-5202 specifications and tested following MIL-R-22684, giving repeatable performance between batches. All product is coloured light blue with an easily readable 5-colour code. Operating Temperature: -55°C to 155°C OUTLINE DRAWING D SECTION 4 d L H H TYPE DMR12 DMR25 DMR100 DMR200 L 3.3±0.4 6.3±0.5 11.5±1.0 15.5±1.0 øD 1.8±0.3 2.3±0.3 4.5±0.5 5.0±0.5 H 28±2.0 28±2.0 35±2.0 33±2.0 ød 0.5±0.05 0.6±0.05 0.8±0.05 0.8±0.05 RANGE Type DMR12 DMR25 DMR100 DMR200 Power/W 0.166 0.6 1 2 Range, E24 & E96 10Ω-1MΩ 10Ω-1MΩ 10Ω-1MΩ 10Ω-1MΩ Temperature Coefficient Max. 50ppm 50ppm 100ppm 100ppm Working Voltage (70°C) Max. 200 300 500 500 Overload Voltage (70°C) 400 600 1000 1000 ORDERING INFORMATION DMR 25 1 T 75R Type Tolerance Taping Value 12 = 0.166W 25 = 0.6W 100 = 1W 200 = 2W 1% = 1 0.5% = 05 0.1% = 01 BD = Tape and reel T = Tape and ammo in ohms * * Parts also available with 26mm width taping - add PT26 to end of part numbeR. High precision tolerance available to special order with extremely low ppm temperature coefficient e.g. 0.1% 15ppm Taping specification available on page 134. 128 Fax: 01371 875075 www.dubilier.co.uk Tel: 01371 875758 RESISTORS PRECISION METAL FILM DMR SPECIFICATION PERFORMANCE TEST Short Time Overload Dielectric Withstanding Voltage Temperature Coefficient of Resistance Insulation Resistance Solderability Resistance to Solvent Terminal Strength Pulse Overload Load Life in Humidity Load Life Temperature Cycling Resistance to Soldering Heat TEST METHOD JIS-C-5202 5.5 2.5 Times RCWV for 5 seconds JIS-C-5202 5.7 in V- Block for 60 seconds JIS-C-5202 5.2 -55˚C to 155˚C JIS-C-5202 5.6 in V-Block JIS-C-5202 6.5 260˚C for ±5 Seconds JIS-C-5202 6.9 Trichloroethane for 1 Min. with Ultrasonic Direct Load for 10 Sec. in The Direction of Terminal Leads JIS-C-5202 5.8 4 Times RCWV 10000 Cycles (1 Sec. on, 25 Sec. off) JIS-C-5202 7.9 40±2˚C, 90~95% RH at RCWV for 1000 hrs. (1.5 Hrs. on, 0.5 Hrs. off) JIS-C-5202 7.10 70˚C at RCWV for 1000 Hrs. (1.5 Hrs. on, 0.5 Hrs off) JIS-C-5202 7.4 -55˚C Room Temp. 155˚C Room Temp. for 5 Cycles JIS-C-5202 6.4 350˚C ± 10˚C for 3±0.5 seconds APPRAISE ± (0.25%+0.05Ω) by Type by Type >10000MΩ 95% Min. Coverage No Deterioration of coatings & markings >2.5kg (24.5N) ±(2%+0.05Ω) ±(1.5%+0.05Ω) ±(1.5%+0.05Ω) ±(0.25%+0.05Ω) ±(0.25%+0.05Ω) SECTION 4 *Rated Continuous Working Voltage (RCWV) = √ Power Rating x Resistance Value POWER DE-RATING Percent Rated Load 100 80 60 40 20 0 0 20 40 70 100 120 140 155 Ambient Temperature /ϒC 180 CURRENT NOISE 1.0 �V/V 0.3 1/4W 0.1 0.03 1/2W 0.01 0.003 10 100 1k 10k 100k Nominal Resistance /� 1M 129 Fax: 01371 875075 www.dubilier.co.uk Tel: 01371 875758