Embedded Power for Business-Critical Continuity Rev. 01 09.30.07 AIT02ZPFC-01NL Series 1 of 2 AIT02ZPFC-01NL 720 Watts Total Power: 720 Watts Input Voltage: 85 - 264 VAC # of Outputs: Single Electrical Specifications Input Special Features • Unity power factor • High efficiency - up to 93% • Universal input voltage and frequency range • Up to 720 W output power • Negative enable function • TRCA-DO-160D harmonic compliant at 115Vac input full load • IEC1000-3-2 compliance at 50Hz and 800Hz input • 100°C baseplate operating temperature • Enable output to control DCDC Converter • Internal active switch bypassing external inrush current Input range Input Surge Input Frequency 85 - 264 VAC (Configurable) 290 VAC / 500 ms 50/60 Hz / 360-800 Hz Efficiency2 93% @ 230 VAC, 720W (Typical) Total Harmonic Less than 10% Power Factor 0.99 typical (115 Vac; 50 Hz to 360 Hz; 320 W); 0.99 typical (230 Vac; 720 W); 0.98 typical (115 Vac; 800Hz; 320 W) Control LD Enable Direct drive output to opto-isolator PFC Enable Voltage Adjust Neg TTL compatible 79% to 100% Vo Output Output voltage 393 V typical (Io = 2.08 A / Vi > 180 Vac 393 V typical (Io=0.1A) 430 max Power Limit for AC input Vin = 100 Vac, Pmax = 320 W Vin = 230 Vac, Pmax =720 W Vin = 85 Vac, Pmax = 320 W Overvoltage Protection Isolation I/O isolation None Input to base-plate 2700 Vdc Output to base-plate 2700 Vdc Leakage current < 3 mA at 800 Hz input frequency Environmental Specifications Safety Operating ambient temperature range -20 °C to +100 °C (baseplate temperature) UL cUL TUV Startup temperature -40 °C to +100 °C (baseplate temperature) Storage temperature Overtemperature protection Calculated MTBF -40 °C to 120 °C 120 °C Max >1 Million hours 60950 Recognized EN60950 Licensed Embedded Power for Business-Critical Continuity Ordering Information Model Number Description Notes AIT02ZPFC-01NL 720W Low Profile PFC Module Negative Enabled Mechanical Drawing Astec Power Rev. 01 09.30.07 AIT02ZPFC-01NL Series 2 of 2 5810 Van Allen Way Carlsbad, CA 92008 USA Telephone: +1 760 930 4600 Facsimile: +1 760 930 0698 Technical Support: +1 888 41 ASTEC or +1 407 241 2752 Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom Telephone: +44 (0) 1384 842 211 Facsimile: +44 (0) 1384 843 355 16- 17th floor Lu Plaza 2 Wing Yip Street Kwun Tong, Kowloon Hong Kong Telephone: +852-2176-3333 Facsimile:+852-2176-3888 For global contact, visit: www.astecpower.com [email protected] While every precaution has been taken to ensure accuracy and completeness in this literature, Astec Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Printed in US A Emerson Network Power. The global leader in enabling business-critical continuity. AC Power Connectivity DC Power Embedded Power Inbound Power Integrated Cabinet Solutions Outside Plant Precision Cooling Site Monitoring and Services EmersonNetworkPower. com Notes: 1. All specifications subject to change without notice. Mechanical drawings are for reference only. 2. Warranty: 1 yr 3. Label and logo appearance may vary from what is shown on mechanical drawings. Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2006 Emerson Electric Co.