Astec Integrated Power W9959_02_DCDC_001-073_73 2/8/02 3:55 PM Page 58 1200 Watts Total Power: Input Voltages: No. of Outputs: APA100 (PFC) 1200 Watts 85-265 VAC Single Electrical Specs Input Input Voltage Input Frequency Efficiency 85 to 265 Vac 50/60 Hz 92% typical (VI = 115 Vac); 94% typical (VI = 230 Vac) Total Harmonic Distortion Less than10% Power Factor 0.99 typical (IO = 2A); 0.97 typical (IO = 1A) Control Special Features • Unity power factor • High efficiency - up to 96% • Universal input voltage and frequency range • Up to 1200W output power • Parallelable with current sharing within 3% • < 10% harmonic distortion conforming to IEC555-2 • 85°C baseplate operating temperature (no derating) • High reliability - over 1 million hours MTBF • Power fail warning signal • PLD feature • Enable output to control AMPSS® DC-DC converters • 125Khz fixed Switching frequency Power Fail Warning Power Fail Warning Adjust LD Enable PFC Enable Voltage Adjust Clock Input (external sync) Clock Output (int. clock) Temperature Monitor Output Current Monitor Output Storage temperature: -40°C to +105°C Overtemperature protection: 90°C typical MTBF: > 1 million hours (50°C baseplate) 58 America’s (USA): 1-888-41-ASTEC 10 mV/°K (2.73V = 0°C) 0 to 1.28mA (1 mA = 2.5A) Output Output Voltage Current Share Accuracy Overvoltage Protection Power Limit Environmental Operating temperature (baseplate): -20°C to +85°C (no derating) Direct drive output to opto-isolator 205 to 355 Vdc adjustable Direct drive output to opto-isolator TTL compatible (low to enable) 240V to 393V 3.3 to 5.5Vp-p @ 1MHz ± 5% 4.5Vp-p typical @ 1MHz ± 0.5% 383 V typical (IO = 2A); 393 V typical (IO = 0A) 3% typical 417 V typical VIN=85Vac; Pmax=750W VIN=180Vac; Pmax= 918W VIN=230Vac; Pmax= 1200W Safety UL CSA EN VDE CE Europe (UK): 44 (1384) 842-211 UL 1950 CSA22.2-234 CSA22.2-950 60950 IEC950 CE Mark (LVD) E132002 LR53 982C 20396-3336-1012 Asia (HK): 852-2437-9662 W9959_02_DCDC_001-073_73 2/8/02 3:55 PM Page 59 AMERICAS EUROPE ASIA 5810 Van Allen Way Carlsbad, CA 92008 Telephone: 760-930-4600 Facsimile: 760-930-0698 Astec House, Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX, UK Telephone: 44 (1384) 842-211 Facsimile: 44 (1384) 843-355 Units 2111-2116, Level 21 Tower1, Metroplaza 223, Hing Fong Road Fwai Fong, New Territories Hong Kong Telephone: 852-2437-9662 Facsimile: 852-2402-4426 APA100 (PFC) Ordering Information Part Number Description Notes APA100-101 APA100-103 APA100-102 1200W Low Profile PFC Module 950W Low Profile PFC Module 1200W Low Power PFC Module For parallel operation the total input current must be <16A rms. Inrush current limited protection required Designed for parallel operation where the total input current >16A rms-requires external rail rectifiers APA100-104 1200W Low Profile PFC Module THERMAL BASE PLATE* 12.7 (0.50) 4 OUTPUT PINS 4 INPUT PINS 14 CONTROL PINS 31-32. 33-34. L1 L2 Output Control Pins 21-22. +ve 28-29. –ve 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. RSV (Reserved) TEMP MON C MON C SHARE CLK OUT CLK IN RSV (Reserved) RSV (Reserved) V ADJ PFW ADJ S GND PFW 34 33 32 31 29 28 8 14 7 1 22 21 61.0 (2.40) Input AMPSSTM POWER MODULE Pin Assignments 116.8 (4.60) + O/P C SHARE CLK OUT 7 1 8 14 Output to AMPSS™ Modules 13. LD ENABLE 14. PF ENABLE – O/P + O/P C SHARE CLK IN 7 1 8 14 – O/P APA100-xxx L2 + I/P + O/P 1 385Vdc 8 1 + SENSE Load 14 7 12 – SENSE – I/P – O/P L1 6 + + O/P Astec Integrated Power 7 85 to 265 Vac AM80A-300L – O/P AM80A-300L + O/P + I/P 6 + Power Fail Warning Adjust 7 1 + SENSE 12 – SENSE – I/P – O/P www.astec.com 59