Embedded Power for Business-Critical Continuity Rev.02.28.07 NLP65_3300 1 of 4 NLP65 Medical Series Single, dual and triple output Total Power: 65W Input Voltage: 85 - 264 VAC # of Outputs: Single, dual, triple Special Features • 85 VAC to 264 VAC universal input range • Harmonic current correction as standard • Maximum component height 1.26 inches • UL, CSA and VDE safety approvals • Overvoltage and short circuit protection • 5 x 3 x 1.26 inch (127.0 x 76.2 x 32mm) footprint • Available RoHS compliant • 2 year warranty Safety VDE0705/EN60601-1/IEC1010 File No. 10401-3336-0156/32480 Licence No. 121949 UL1950 File No. E147937 CSA C22.2 No. 950 File No. LR41062C The NLP65 Medical series is a 65 W universal input ac-dc power supply with input harmonic current correction as standard. This compact design, packed in a 5 x x3 inch card with a maximum component height of 1.26 inches, is ideal for use in a variety of medical, laboratory and dental applications such as centrifuges, incubators and infusion pumps. The NLP65 Medical series comprises of eight models in single, dual and triple output configurations. Providing 65 Watts of continuous output power with free air convection, the NLP65 Medical series will deliver 75 Watts output power with 20 CFM of air. The series, with full medical safety approval to EN60601 and UL2601, is CE marked, greatly accelerating design-in time and reducing system compliance costs. Embedded Power for Business-Critical Continuity Rev.02.28.07 NLP65_3300 2 of 4 Specifications All specifications are typical at nominal input, full load at 25°C unless otherwise stated OUTPUT SPECIFICATIONS Output power EMC CHARACTERISTICS Natural convection Total regulation 65 W max. See table Rise time At turn-on Transient response Main output 25% step at 0.1 A/μs Temperature coefficient 1.0 s, max. 5.0% max. dev., 1ms recovery to 1.0% ±0.02%/°C Overvoltage protection Main outputs Short circuit protection Cyclic operation 125%, ±10% Yes INPUT SPECIFICATIONS Input voltage range (See Note 2) Universal input Input frequency range 47-63 Hz Input surge current (cold start) 120 Vac 230 Vac Safety ground leakage current 264 Vac, 60 Hz Input current 120 Vac 230 Vac Input fuse 85-264 Vac 17 A max. 32 A max. 95 μA 1.05 A rms 0.51 A rms Conducted emissions Radiated emissions ESD air ESD contact Surge Fast transients Radiated immunity Conducted immunity EN55022, FCC part 15 EN55022, FCC part 15 EN61000-4-2, level 3 EN61000-4-2, level 4 EN61000-4-5, level 3 EN61000-4-4, level 3 EN61000-4-3, level 3 EN61000-4-6, level 3 Level A Level A Perf. criteria 1 Perf. criteria 1 Perf. criteria 1 Perf. criteria 1 Perf. criteria 2 Perf. criteria 2 120 Vac, 60 Hz 16 ms @ 65 W GENERAL SPECIFICATIONS Hold-up time Efficiency 120 Vac, 65 W 72% typ. Isolation voltage Input/output Input/chassis 4000 Vac 1500 Vac Switching frequency Fixed 100 kHz, ±5 kHz Approvals and standards EN60601, UL2601 CSA 22.2 No. 125 Weight MTBF 283 g (10 oz) MIL-HDBK-217F 150,000 hours ENVIRONMENTAL SPECIFICATIONS Thermal performance 250 Vac F 3.15 A Operating ambient, (See derating curve) Non-operating 0 ¡C to 50 ¡C ambient, convection cooled 50 ¡C to 70 ¡C ambient, convection cooled Relative humidity Non-condensing Altitude Operating Non-operating Vibration (See Note 5) 5-500 Hz Shock per MIL-STD-810E 0 °C to +70 °C -40 °C to +85 °C 65 W Derate to 50% load 5% to 95% RH 10,000 feet max. 30,000 feet max. 2.43 G rms approx. 516.4 Part IV Embedded Power for Business-Critical Continuity Rev.02.28.07 NLP65_3300 3 of 4 Specifications Contd. OUTPUT CURRENT OUTPUT VOLTAGE MAX (1) PEAK 2 3 4 5 6 TOTAL MODEL REGULATION (6) NUMBER (11,12) NLP65-9908J +5 V 7A 9.1 A 8A 50 mV ±2.0% +12 V 2.5 A 3.3 A 3A 150 mV ±5.0% -12 V 0.5 A 0.81 A 1A 120 mV ±5.0% +5 V 7A 9.1 A 8A 50 mV ±2.0% +15 V 2.2 A 2.9 A 2.5 A 150 mV ±5.0% -15 V 0.65 A 0.85 A 0.8 A 150 mV ±5.0% +5 V 7A 9.1 A 8A 50 mV ±2.0% +24 V 2A 2.6 A 2A 240 mV ±5.0% NLP65-9910J NLP65-9920J +5 V 7A 9.1 A 8A 50 mV ±2.0% +12 V 2.5 A 3.3 A 3A 150 mV ±5.0% +5 V 10 A 13 A 12 A 50 mV ±2.0% NLP65-9905J +12 V 5.4 A 7A 6.5 A 120 mV ±2.0% NLP65-9912J +15 V 4.4 A 5.7 A 5.3 A 150 mV ±2.0% NLP65-9915J +24 V 2.7 A 3.5 A 3.5 A 240 mV ±2.0% NLP65-9924J Notes 1 RIPPLE (4) FAN (10) Natural convection cooling. Models NLP65-9929J, NLP65-9908J, NLP65-9910J must not exceed 62.5 Watts continuous output power with natural convection. Model NLP65-9920J not to exceed 65 Watts continuous output power with natural convection. When the input voltage is less than 90 Vac the operating temperature range is 0 ° C to +40 °C. The ripple and regulation specifications may not be met. Peak output current lasting less than 60 seconds with duty cycle less than 5%. During peak loading, output voltage may exceed total regulation limits. Figure is peak-to-peak for convection power rating. Output noise measurements are made across a 20MHz bandwidth using a 6 inch twisted pair, terminated with a 10 μF electrolytic capacitor and a 0.1 μF ceramic capacitor. Three orthogonal axes, random vibration 10 minutes for each axes, 2.4 G rms 5 Hz to 500 Hz. To maintain stated regulation then: for single output units I ³ 0.2 A I max. for multiple output units 0.25 ² I(A)/I(B) ² 5, for I(A) ³ 0.2 A I(A) max. NLP65-9929J For optimum reliability, no part of the heatsink should exceed 120 °C, and no semiconductor case temperature should exceed 130 °C. 8 CAUTION: Allow a minimum of 1 second after disconnecting line power when making thermal measurements. 9 This product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. 10 Maximum continuous output power for all multiple output models must not exceed 75 Watts with 20 CFM forced air cooling at 50 °C. 11 The ‘J’ suffix indicates that these parts are Pb-free (RoHS 6/6) compliant. TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details. 12 NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool at http://www.artesyn.com/powergroup/products.htm to find a suitable alternative. 7 Embedded Power for Business-Critical Continuity Rev.02.28.07 NLP65_3300 4 of 4 Americas 5.00 (127.00) 4.550 (115.57) J1 3 N 0.225 (5.715) Europe (UK) J3 1 1 L 3.00 (76.20) 6 2.550 (64.770) T1 J2 ALL DIMENSIONS IN INCHES (mm) Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom Telephone: +44 (0) 1384 842 211 Facsimile: +44 (0) 1384 843 355 Asia (HK) C19 Mounting Hole Diameter 0.156 (4.00) 5810 Van Allen Way Carlsbad, CA 92008 USA Telephone: +1 760 930 4600 Facsimile: +1 760 930 0698 MAXIMUM COMPONENT HEIGHT 1.26 (32.00) TOLERANCE: .xxx ± 0.005" .xx ± 0.02" 16th - 17th Floors, Lu Plaza 2 Wing Yip Street, Kwun Tong Kowloon, Hong Kong Telephone: +852 2176 3333 Facsimile: +852 2176 3888 For global contact, visit: www.powerconversion.com [email protected] While every precaution has been taken to ensure accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Emerson Network Power. The global leader in enabling business-critical continuity. AC Power Connectivity DC Power Embedded Power Inbound Power Integrated Cabinet Solutions Outside Plant Precision Cooling Site Monitoring and Services EmersonNetworkPower. com Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2007 Emerson Electric Co.