RFMA1415-2W 14.4 – 15.4 GHz Power Amplifier MMIC UPDATED 06/21/2007 FEATURES • • • • 14.40– 15.40GHz Operating Frequency Range 32 dBm Output Power at 1dB Compression 28 dB Typical Power Gain @ 1dB Gain Compression -41dBc Typical OIM3 @ each tone Pout 21.5dBm Excelics RFMA1415 -2W APPLICATIONS • • Point-to-point and point-to-multipoint radio Military Radar Systems Caution! ESD sensitive device. ELECTRICAL CHARACTERISTICS (Ta = 25 °C, 50 ohm, Vdd=7V, Vgg=-5V) SYMBOL PARAMETER/TEST CONDITIONS Operating Frequency Range F P1dB G1dB OIMD3 Input RL Output RL MIN TYP 14.4 MAX UNITS 15.4 GHz Output Power at 1dB Gain Compression 31 32 dBm Gain @ 1dB gain compression Output 3rd Order Intermodulation Distortion @∆f=10MHz, Each Tone Pout 21 dBm 25 28 dB -41 -38 dBc Input Return Loss -10 -8 dB Output Return Loss -15 -8 dB Idd Drain Current 1900 2150 mA Vdd Drain Voltage 7 8 V Vgg Gate Voltage -5 Rth Thermal Resistance (Au-Sn Eutectic Attach) Tb Operating Base Plate Temperature V 4.0 o 4.5 -30 C/W +80 ºC MAXIMUM RATINGS @25°C SYMBOL CHARACTERISTIC ABSOLUTE CONTINUOUS 1,2 VDD Drain Supply Voltage 12V 8V VGG Gate Supply Voltage -8V -3V IDD Drain Current Idss 3.6A IGG Gate Current 240mA 40mA PIN Input Power 20dBm @ 3dB compression TCH Channel Temperature 175°C 150°C TSTG Storage Temperature -65/175°C -65/150°C 30.0W 25.2W PT Total Power Dissipation 1. Operating the device beyond any of the above rating may result in permanent damage. 2. Bias conditions must also satisfy the following equation Vdd*Idd < (TCH –Tb)/RTH; where Tb = operating base plate temperature Specifications are subject to change without notice. Excelics Semiconductor, Inc. 310 De Guigne Drive, Sunnyvale, CA 94085 Phone: 408-737-1711 Fax: 408-737-1868 Web: www.excelics.com page 1 of 2 Revised June 2007 RFMA1415-2W 14.4 – 15.4 GHz Power Amplifier MMIC UPDATED 06/21/2007 Package Outline 0.472 0.236 4X.050 CHAMFER 4X DIA 0.098 THRU PIN1 Indicator 0.130 Vg Excelics RFMA1415 -2W-P3 RF IN 0.709 Vg Vd 4X 0.150 0.591 RF OUT 6 X .013 Vd 6X 0.100±0.010 0.075 6X 0.004 0.040 0.025 All dimensions in inches Tolerance: ±0.005 ORDERING INFORMATION Part Number RFMA1415-2W-P3 Refer P3 Package Outline DISCLAIMER EXCELICS SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. EXCELICS DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN. LIFE SUPPORT POLICY EXCELICS SEMICONDUCTOR PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF EXCELICS SEMICONDUCTOR, INC. AS HERE IN: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Specifications are subject to change without notice. Excelics Semiconductor, Inc. 310 De Guigne Drive, Sunnyvale, CA 94085 Phone: 408-737-1711 Fax: 408-737-1868 Web: www.excelics.com page 2 of 2 Revised June 2007