SDI-003 SERIAL D1 TO CVBS/YC MODULE + + + Small compact design for pcb mounting Fully filtered and buffered outputs Three CVBS outputs or CVBS + Y/C output + + Auto 625/525 operation Reclocked outputs available This interface card accepts D1 serial digits and provides three analogue Composite video outputs with colour bursts and mixed sync’s to allow picture display on a Composite video monitor. An interface card with Y/C output (S-Video) and 1 CVBS output only is available. Input Requirements Input 1 x 270 Mb/s serial NRZI (EBU TECH 3267, SMPTE RP-259M) 75 ohm terminating 625/50 or 525/60 Auto detection Automatic up to 40 dB at 200 MHz (Typically 300m of Belden 8281 at 270Mhz) Input Impedance Line standard Equalisation Analogue Output Characteristics Output format Output levels Impedance Resolution Frequency response Signal-to-Noise ratio 3 CVBS or 1 CVBS and Y/C (As requested) 1 V pk-pk including syncs ±2% 75 ohms 8 bit data / 9 bit DAC ±0.2 dB to 5.5 MHz > 60 dB rms to 5.5 MHz Digital Outputs Output format Impedance Available 2 reclocked serial o/ps 75 ohms Options B and D only Other parameters Power + 5V ±0.25V (500 mA max) - 5V ±0.50V (50 mA max) 00C to 400C Yes DR00168C Operating Temp. Aqueous Washable Package ORDERING CODES SDI-003A SDI-003B SDI-003C SDI-003D Reclocked o/p’s x √ x √ 3 x CVBS o/p’s √ √ x x CVBS, Y and C o/p’s x x √ √ © Faraday Technology. As part of continual product improvement the specifications, details and dimensions shown in this publication are subject to change without notice FARA013d.DOC Page 1 of 2 Sep-01(D) PACKAGE DETAIL Faraday Technology Ltd. Croft Road Industrial Estate, Newcastle, Staffordshire ST5 0QZ. England. FARA013d.DOC Tel: Fax: Email: Web site: Page 2 of 2 + 44 (0)1782 661501 + 44 (0)1782 630101 [email protected] http://www.faradaytech.co.uk Sep-01(D)