FERROXCUBE DATA SHEET 4S3 Material specification New data 2008 Sep 01 Ferroxcube Material specification 4S3 4S3 SPECIFICATIONS Wideband EMI-suppression material specified on impedance and optimized for frequencies from 30 to 1000 MHz. SYMBOL µi B Z(1) ρ TC density CONDITIONS VALUE 25 °C; ≤10 kHz; 0.25 mT 25 °C; 10 kHz; 3000 A/m 100 °C; 10 kHz; 3000 A/m 25 °C; 30 MHz 25 °C; 50 MHz 25 °C; 200 MHz 25 °C; 500 MHz DC; 25 °C UNIT 250 ± 20 % ≈ 360 µ's , µ''s mT 2 10 ≈ 310 ≥ 10 ≥ 40 ≥ 200 ≥ 250 ≈ 105 ≥ 250 ≈ 4600 µ''s Ω 10 Ωm °C kg/m3 1 1 500 400 400 300 300 200 200 100 100 Fig.2 2008 Sep 01 T ( o C) 25 oC 100 oC B (mT) µi 300 10 3 Complex permeability as a function of frequency. handbook, halfpage 4S3 100 f (MHz) MFP217 MFP216 500 handbook, halfpage 102 10 Fig.1 1. Measured on a bead ∅5 × ∅2 × 10 mm. 0 4S3 µ's Note 0 50 MFP215 10 3 handbook, halfpage 0 100 500 Initial permeability as a function of temperature. 0 100 200 4S3 1000 2000 H (A/m) Fig.3 Typical B-H loops. 262 Ferroxcube Material specification 4S3 MFP228 150 4S3 Z (Ω) 100 50 0 1 10 102 f (MHz) 103 Fig.4 Impedance as a function of frequency, measured on a bead ∅5 × ∅2 × 10 mm. 2008 Sep 01 263 Ferroxcube Material specification 4S3 DATA SHEET STATUS DEFINITIONS DATA SHEET STATUS PRODUCT STATUS DEFINITIONS Preliminary specification Development This data sheet contains preliminary data. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Product specification Production This data sheet contains final specifications. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. DISCLAIMER Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Ferroxcube customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Ferroxcube for any damages resulting from such application. PRODUCT STATUS DEFINITIONS STATUS INDICATION DEFINITION Prototype These are products that have been made as development samples for the purposes of technical evaluation only. The data for these types is provisional and is subject to change. Design-in These products are recommended for new designs. Preferred These products are recommended for use in current designs and are available via our sales channels. Support These products are not recommended for new designs and may not be available through all of our sales channels. Customers are advised to check for availability. 2008 Sep 01 264