FM SERIES RIXSON FIREMARK ELECTROMAGNETIC DOOR RELEASE DESCRIPTION The Rixson Firemark FM Series electromagnetic door releases hold fire and smoke barrier doors open until released by a remote smoke detector switch, fire alarm control or sprinkler system. In the event of power failure, doors are released to close automatically, but may be opened or closed manually at any time. The door holders have a sprayed aluminum finish. All models feature a “multi-voltage” design, allowing them to operate on 12 VDC, 24 VAC/DC, or 120 VAC, thus simplifying both installation and inventory. POWER REQUIREMENTS Voltage 12 VDC 24 VAC/DC 120 VAC Current .040 amp. .020 amp. .020 amp. FEATURES • Fail-Safe Operation • Approx. 35 lbs. (15.9 kg) Holding Power • Positive Release Button to Initiate Closing Motion when the Electromagnet is De-Energized APPROVALS UL Listed C.S.F.M. NYC BS&A R4869 3550-0047:001 287-77-SA ORDERING INFORMATION Part Number Model Description 140-90000 140-90001 140-90002 140-90003 140-90004 140-90005 FM-980 FM-981 FM-990 FM-996 FM-997 FM-998 Floor mount Floor mount, double doors Low profile mount Surface Mount Recessed mount Recessed, concealed wiring Total projection from wall N/A N/A 1 7/8 in. (4.9 cm) 4.12 in. (10.05 cm) 2.6 in. (5.35 cm) 2.6 in. (5.35 cm) Specifications are provided for information only, are not intended to be used for installation purposes, and are believed to be accurate. However, no responsibility is assumed by Gamewell-FCI for their use. Specifications subject to change without notice. © 2006 All Rights Reserved GAMEWELL-FCI 12 Clintonville Road, Northford, CT 06472 - Tel: (203) 484-7161 - Fax: (203) 484-7118 www.gamewell-fci.com An ISO 9001 Certified Company 9020-0045 Rev. E 1 of 1