GFOCA Connectors 180-116 M83526/16 Style GFOCA Plug Connector 4 Channel Hermaphroditic with Optional Dust Cover 180-116-01-A-1-M-H 1.250 (31.8) Max Product Series Basic Number Mating Plane “M” Dust Cover (See Table V) Cable Diameter Configuration (Table I) Seal Termini Ferrule I.D. (Table II) Insert Cap Key Configuration (Table III) Alignment Sleeve Style (Table IV) 1.0625-.1P-.2L-DS-2A Dust Cover Configuration (Table V) 9.127 (231.8) Max (When Dust Cap Installed) Mating Plane 6.750 (171.5) Max 4.800 (121.9) Max Wave Washer Set Screw 1.0625-1P-2L-DS-2B 1.555 (39.5) Max Dia Seal “H”Dust Cover (See Table V) Cable Dia (See Table I) Flexible Boot Compression Nut Coupling Nut Alignment Pin Seal Lanyard Screw KEY 1 .137 (3.5) 2X.139 (3.5) KEY 2 .082 (2.1) .084 (2.1) Removable Insert Cap .160 (4.1) .162 (4.1) 1.0625-.1P-.2L-DS-2A P1 P2 S1 S2 P1 P2 S1 S2 1 .043 (1.1) .002 (0.1) TYP Alignment Sleeve 2 .157 (4.0) .159 (4.0) KEY 3 .160 (4.1) .162 (4.1) .082 (2.1) .084 (2.1) P1 P2 S1 S2 3 KEY "U" UNIVERSAL .160 (4.1) 2X.162 (4.1) P1P2 S1 S2 U REMOVABLE INSERT CAP KEY 1 SHOWN .157 (4.0) .159 (4.0) © 2006 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] F-4 www.glenair.com GFOCA Connectors 180-116 M83526/16 Style GFOCA Plug Connector 4 Channel Hermaphroditic with Optional Dust Cover TABLE I: CABLE DIAMETER Dash No. Inch 01 .190 - .239 TABLE II: TERMINI FERRULE I.D. Cable Dia Millimeter Dash Sym 4.83 - 6.07 A Ferrule I.D. Max (mm) Min (mm) .1270 TABLE III: INSERT CAP KEY CONFIGURATION .1260 Dash No. Configuration 1 02 .240 - .279 6.10 - 7.09 B .1280 .1270 1 03 .280 - .315 7.11 - 8.00 C .1430 .1420 2 2 .2300 3 3 No Termini Supplied 4 U 04 .316 - .346 8.03 - 8.79 D 05 .347 - .379 8.81 - 9.63 W 06 .380 - .423 9.65 - 10.74 07 .424 - .465 10.77 - 11.81 TABLE IV: ALIGNMENT SLEEVE CONFIGURATION Dash Sym Configuration M S N .2340 TABLE V: DUST COVER CONFIGURATION Dash Sym Configuration Solid H Hermaphroditic Split M Male None N None APPLICATION NOTES 1. Assembly identified with manufacturer’s name and P/N, space permitting. 2. Glenair 180-116 Connector Features: A. Plug Barrel, Shell, Coupling Nut, Backshell, Removable Insert Cap - Al Alloy B. Lanyard: Coated Stainless Steel Cable © 2006 Glenair, Inc. C. Misc. Hardware: Stainless Steel/Passivated D. Termini: See 181-050 (Page F-3) E. Operating & Transit Temperature range:-65°C to +160°C storage temperature range: -70°C to +185°C 3. Metric dimensions (mm) are indicated in parentheses. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] F-5 www.glenair.com