MIL-PRF-28876 Connectors 181-040 M29504/15 Style Front Release Socket Terminus Size 16 181-040-1260 C N N = Alignment Sleeve Assembly Not required (Omit to receive Alignment Sleeve) Product Series Basic Number Crimp Sleeve Designator Omit if None (See Table II) Dash Number (Table I) .955 (24.3) Max .800 (20.3) Max Terminus Assembly .118 (3.0) .114 (2.9) Dia Retaining Clip .277 (7.0) .267 (6.8) (See Note 6) Alignment Sleeve .158 (4.0) Max .158 (4.0) Min A Dia Ferrule Hole .118 (3.0) .115 (2.9) Dia .080 (2.0) .074 (1.9) Dia Crimp Sleeve (See Note 3) TABLE I: DASH NUMBER A Dia (Microns) 1250 126.0 125.0 Designator 1255 126.5 125.5 C 1260 127.0 126.0 1270 128.0 127.0 1420 143.0 142.0 TABLE III: TERMINUS ACCESSORIES TABLE II: CRIMP SLEEVE DESIGNATOR Assembly Dash Number Protective Cover Ferrule Environmental Seal Cable Diameter Part Number 2.0-2.4 mm (MIL-Spec) 265-008 Consult Factory for Additional Sizes Part Number Accessory 265-010 Alignment Sleeve Assembly 182-012 Crimp Tool 182-013 Insertion Tool, Straight 182-014 Insertion Tool, 90° 182-015 Removal Tool 182-016 Alignment Sleeve Assembly Insertion/Removal Tool 182-017 Hand Polishing Tool APPLICATION NOTES 1. 2. Assembly packaged in plastic bag and tag identified with manufacturer’s name and part number Material/ Finish: Alignment Sleeve, Ferrule: Zirconia Ceramic/ N.A. Protective cover: Spring Alloy / Nickel Terminus Assembly: Stainless Steel / Passivate Retaining Clip: Spring Alloy / N.A. Seal: Fluorosilicone © 2006 Glenair, Inc. 4. Crimp Sleeve: Brass Alloy / Nickel Alignment Sleeve Assembly and Crimp Sleeve may be ordered separately (Tables II and III) Metric dimensions (mm) are in parentheses. 5. Dummy Terminus: Part Number 181-051 6. Dimension to be measured when installed into insert equivalent fixture per MIL-PRF-29504/15 3. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] D-2 www.glenair.com