Bulkhead Feed-Thrus 947-101 Flange Mount Environmental Bulkhead Feed-Thru 1.00in Panel • MIL-DTL-38999 Series I Type 2.41 Shell Size 09 11 13 15 17 19 21 23 25 Product Series 1.69 Alternate Key Position A, B, C, D (N for Normal) Flage Side Ref A TYP 947 - 101 - 21 - 35 Basic Number 1.00 Max Panel B Insert Arrangement Per MIL-DTL-38999 Series I MIL-STD-1560 P Contact Termination P - Pin on Flange Side S - Socket on Flange Side .156 Max B TYP C TABLE I: CONNECTOR DIMENSIONS SHELL SIZE A MAX B SQ C SQ D DIA E ±.005(0.1) 09 .573(14.6) .719(18.3) .938(23.8) .125(3.2) .703(17.9) 11 .701(17.8) .812(20.6) 1.031(26.2) .125(3.2) .827(21.0) 13 .851(21.6) .906(23.0) 1.125(28.8) .125(3.2) 1.015(25.8) 15 .976(24.8) .969(24.6) 1.219(31.0) .125(3.2) 1.140(29.0) 17 1.101(28.0) 1.062(27.0) 1.312(33.3) .125(3.2) 1.265(32.1) 19 1.208(30.7) 1.156(29.4) 1.438(36.5) .125(3.2) 1.390(35.3) 21 1.333(33.9) 1.250(31.8) 1.562(39.7) .125(3.2) 1.515(38.5) 23 1.458(37.0) 1.375(34.9) 1.688(42.9) .156(4.0) 1.640(41.7) 25 1.583(40.2) 1.500(38.1) 1.812(46.0) .156(4.0) 1.765(44.8) E Insert Arrangement per MIL-DTL-38999, Series l D Dia Typ B Ref E Dia Recommended Panel Cut-Out APPLICATION NOTES 1. Assembly identified with manufacturer’s name and part number, space permitting 2. Material/finish: Shells and nuts—Al alloy,6061-T6, QQ-A-225/8/cadmium O.D. per QQ-P-416 Type II, Class 3 over electroless nickel, Mil-C-26074, Class 1/2/3/4, Grade A/B/C, 500 hr. salt spray Contacts—leaded nickel copper/gold plate, MIL-G-45204,Type II, © 2008 Glenair, Inc. Class I Bayonet pins—AISI 300 series stainless steel/passivate, QQ-P-35 Hoods—AISI 305 series stainless steel/passivate, QQ-P-35. Inserts—Epiall 1908 Seals—silicone per ZZ-R-765 3. Metric Dimensions (mm) are indicated in parentheses. CAGE CODE 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-6 E-Mail: [email protected]