GULFSEMI EG1ME

EG1ME
Glass Passivated Junction
Ultra Fast Recovery Plastic Rectifiers
VOLTAGE:1000V
CURRENT: 1.0A
FEATURE
A-405
Low power loss
High surge capability
Glass passivated chip junction
Ultra-fast recovery time for high efficiency
High temperature soldering guaranteed
250℃/10sec/0.375″lead length at 5 lbs tension
MECHANICAL DATA
Terminal: Plated axial leads solderable per
MIL-STD 202E, method 208C
Case: Molded with UL-94 Class V-0 recognized Flame
Retardant Epoxy
Polarity: color band denotes cathode
Mounting position: any
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(single-phase, half wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated)
units
SYMBOL
EG1ME
Vrrm
Vrms
Vdc
1000
700
1000
V
V
V
If(av)
1.0
A
Ifsm
30
A
Vf
1.7
V
Ir(av)
50
µA
µA
µA
Trr
Cj
10
100
75
15
(Note 3)
Rth(ja)
60
°C
Storage and Operating Temperature Range
Tstg, Tj
-55 to +150
°C
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC blocking Voltage
Maximum Average Forward Rectified
Current 3/8”lead length at Ta =55°C
Peak Forward Surge Current 8.3ms single
half sine-wave superimposed on rated load
Maximum Forward Voltage at rated Forward
Current and 25°C
Maximum full load reverse current full cycle
average at 55°C Ambient
Maximum DC Reverse Current
Ta =25°C
at rated DC blocking voltage
Ta =125°C
Maximum Reverse Recovery Time (Note 1)
Typical Junction Capacitance
(Note 2)
Typical Thermal Resistance
Ir
nS
pF
/W
Note:
1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A
2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc
3. Thermal Resistance from Junction to Ambient at 3/8”lead length, P.C. Board Mounted
Rev.A1
www.gulfsemi.com
RATINGS AND CHARACTERISTIC CURVES EG1ME
Rev.A1
www.gulfsemi.com