RL3JG ULTRAFAST EFFICIENT GLASS PASSIVATED RECTIFIER VOLTAGE： ： 600V CURRENT： ： 2.0A DO-201AD FEATURE Low power loss High surge capability Ultra-fast recovery time for high efficiency High temperature soldering guaranteed 250℃/10sec/0.375″lead length at 5 lbs tension MECHANICAL DATA Terminal：Plated axial leads solderable per MIL-STD 750, method 2026 Case：Molded with UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity：color band denotes cathode Mounting position：any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half -wave, 60HZ, resistive or inductive load rating at 25℃, unless otherwise stated) SYMBOL RL3JG units Maximum Recurrent Peak Reverse Voltage Vrrm 600 V Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified Current 3/8″lead length at Ta =45℃ Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Forward Voltage at Forward current 2A Peak Maximum DC Reverse Current Ta =25℃ at rated DC blocking voltage Ta =125℃ Vrms 420 600 V Vdc If(av) 2.0 A Ifsm 130.0 A Vf 1.5 V 10.0 100.0 30 10.0 -55 to +150 μA μA Maximum Reverse Recovery Time Typical Thermal Resistance (Note 1) (Note 2) Storage and Operating Junction Temperature Ir Trr R(ja) Tstg,Tj V nS ℃/W ℃ Note： 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Thermal Resistance from Junction to Ambient at 3/8″lead length, P.C. Board Mounted Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES RL3JG 1 1 Rev.A1 www.gulfsemi.com