GULFSEMI EU02D

EU02D THRU EU02J
Glass Passivated Junction
Ultra Fast Recovery Plastic Rectifiers
VOLTAGE:200 TO 600V
CURRENT: 1.0A
FEATURE
A-405
Low power loss
High surge capability
Glass passivated chip junction
Ultra-fast recovery time for high efficiency
High temperature soldering guaranteed
250℃/10sec/0.375″lead length at 5 lbs tension
MECHANICAL DATA
Terminal: Plated axial leads solderable per
MIL-STD 202E, method 208C
Case: Molded with UL-94 Class V-0 recognized Flame
Retardant Epoxy
Polarity: color band denotes cathode
Mounting position: any
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(single-phase, half wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated)
units
SYMBOL
EU02D
EU02G
EU02J
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC blocking Voltage
Maximum Average Forward Rectified
Current 3/8”lead length at Ta =55°C
Peak Forward Surge Current 8.3ms single
half sine-wave superimposed on rated load
Maximum Forward Voltage at rated Forward
Current and 25°C
Maximum DC Reverse Current
Ta =25°C
at rated DC blocking voltage
Ta =125°C
Maximum Reverse Recovery Time (Note 1)
Typical Junction Capacitance
(Note 2)
Vrrm
Vrms
Vdc
200
140
200
400
280
400
600
420
600
Trr
Cj
17
15
nS
pF
Typical Thermal Resistance
R(ja)
50
60
°C
(Note 3)
Storage and Operating Temperature Range
V
V
V
If(av)
1.0
A
Ifsm
30
A
Vf
1.4 (IF=1.0A)
V
10
50
100
µA
µA
Ir
Tstg, Tj
-55 to +150
/W
°C
Note:
1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A
2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc
3. Thermal Resistance from Junction to Ambient at 3/8”lead length, P.C. Board Mounted
Rev.A2
www.gulfsemi.com
RATINGS AND CHARACTERISTIC CURVES EU02D THRU EU02J
1
Rev.A2
www.gulfsemi.com