G10XB05 THRU G10XB100 SINGLE PHASE GLASS PASSIVATED BRIDGE RECTIFIER Voltage: 50 to 1000V Current: 10.0A Features GSIB-3S Glass passivated chip junction Ideal for printed circuit board High surge current capability High case dielectric strength Mechanical Data Terminal: Plated leads solderable per MIL-STD 202E, Method 208C Case: UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity: Polarity symbol marked on body Mounting position: any Dimensions in millimeters MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half -wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated, for capacitive load, derate current by 20%) Symbol G10X B05 G10X B10 G10X B20 G10X B40 G10X B60 G10X B80 G10X B100 units 1000 V Maximum repetitive peak reverse voltage Vrrm 50 100 200 400 600 800 Maximum RMS voltage Vrms 35 70 140 280 420 560 700 V Maximum DC blocking voltage Vdc 50 100 200 400 600 800 1000 V Maximum average forward Tc = 100℃(Note 1) Rectified output current at Ta = 25℃(Note 2) Peak forward surge current 10ms single sine-wave superimposed on rated load Maximum instantaneous forward voltage drop per leg at 5.0A Rating for fusing (t < 10.0ms) If(av) 10.0 2.7 A Ifsm 120 A Vf 1.1 V I2t 60 A2Sec (Note2) (Note1) Rth(ja) Rth(jc) 10.0 250 26.0 2.3 Operating junction and storage temperature range Tj, Tstg -55 to +150 Maximum DC reverse current at rated DC blocking voltage per leg Maximum thermal resistance per leg Ta = 25°C Ta = 125°C Ir µA ℃/W ℃ Note: 1. junction to case, with heatsink 2. junction to ambient, without heatsink 3. Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat transfer with #6 screw Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES G10XB05 THRU G10XB100 Rev.A1 www.gulfsemi.com