KBP2005G THRU KBP210G SINGLE PHASE GLASS PASSIVATED BRIDGE RECTIFIER Voltage: 50 to 1000V Current:2.0A Features KBP Glass passivated chip junction High case dielectric strength High surge current capability Ideal for printed circuit board Mechanical Data Terminal: Plated leads solderable per MIL-STD 202E, Method 208C Case: UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity: Polarity symbol marked on body Mounting position: any Dimensions in millimeters MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half -wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated, for capacitive load, derate current by 20%) Symbol KBP2 005G KBP 201G KBP2 02G KBP2 04G KBP 206G KBP2 08G KBP 210G units Maximum repetitive peak reverse voltage Vrrm 50 100 200 400 600 800 1000 V Maximum RMS voltage Vrms 35 70 140 280 420 560 700 V Vdc 50 100 200 400 600 800 1000 V Maximum DC blocking voltage Maximum average forward rectified output current Ta =55℃ Peak forward surge current single sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage drop per leg at 2.0A If(av) 2.0 A Ifsm 60 A Vf 1.1 V I2t 15 A2Sec Ir 5.0 500 µA Rth(ja) Rth(jc) 30 11 ℃/W Typical junction capacitance per leg at 4.0V,1MHz Cj 25 pF Operating junction and storage temperature range Tj, Tstg -55 to +150 ℃ Rating for fusing (t < 8.3ms) Maximum DC reverse current at rated DC blocking voltage per leg Maximum thermal resistance per leg Ta = 25°C Ta = 125°C (Note1) Note: 1. Thermal resistance from junction to ambient and from junction to lead mounted on P.C.B. with 0.47 x 047" (12 x 12mm) copper pads Rev.A6 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES KBP2005G THRU KBP210G Rev.A6 www.gulfsemi.com