UF3001 THRU UF3007 ULTRAFAST EFFICIENT PLASTIC SILICON RECTIFIER VOLTAGE： ：50 TO 1000V CURRENT： ： 3.0A DO-201AD FEATURE Low power loss High surge capability Ultra-fast recovery time for high efficiency High temperature soldering guaranteed 250℃/10sec/0.375″lead length at 5 lbs tension MECHANICAL DATA Terminal：Plated axial leads solderable per MIL-STD 202E, method 208C Case：Molded with UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity：color band denotes cathode Mounting position：any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half -wave, 60HZ, resistive or inductive load rating at 25℃, unless otherwise stated) SYMBOL Maximum Recurrent Peak Reverse Voltage Vrrm Maximum RMS Voltage Vrms Maximum DC blocking Voltage Vdc Maximum Average Forward Rectified Current 3/8″lead length at Ta =55℃ Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Forward Voltage at Forward current 1A Peak Maximum DC Reverse Current Ta =25℃ at rated DC blocking voltage Ta =125℃ Maximum Reverse Recovery Time (Note 1) Typical Junction Capacitance (Note 2) Typical Thermal Resistance (Note 3) Storage and Operating Junction Temperature UF 3001 50 35 50 UF 3002 100 70 100 UF 3003 200 140 200 UF 3004 400 280 400 UF 3005 600 420 600 UF 3006 800 560 800 UF 3007 1000 700 1000 V V V If(av) 3.0 A Ifsm 150.0 A Vf 1.0 1.3 10.0 100.0 Ir Trr Cj R(ja) Tstg,Tj 1.7 50 75 V μA μA 75 50 20.0 -55 to +150 nS pF ℃/W ℃ Note： 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc 3. Thermal Resistance from Junction to Ambient at 3/8″lead length, P.C. Board Mounted Rev.4 units www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES UF3001 THRU UF3007 1 1 Rev.4 www.gulfsemi.com