SUF1500 THRU SUF1508 HIGH EFFICIENT PLASTIC SILICON RECTIFIER VOLTAGE:50 TO 1000V CURRENT: 1.5A FEATURE DO-15 Low power loss High surge capability Ultrafast recovery time for high efficiency High temperature soldering guaranteed 250°C/10sec/0.375”lead length at 5 lbs tension MECHANICAL DATA Terminal:Plated axial leads solderable per MIL-STD 202E, method 208C Case:Molded with UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity:color band denotes cathode Mounting position:any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half -wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated) SYM BOL Maximum Recurrent Peak Reverse Voltage Vrrm Maximum RMS Voltage Vrms Maximum DC blocking Voltage Maximum Average Forward Rectified Current 3/8’lead length at Ta =55°C Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Forward Voltage at Forward current 2.0A Peak Maximum DC Reverse Current T =25°C at rated DC blocking voltage Ta =100°C Maximum Reverse Recovery Time (Note 1) Typical Junction Capacitance (Note 2) Vdc SUF 1500 50 35 50 SUF 1501 100 70 100 SUF 1502 200 140 200 SUF 1504 400 280 400 SUF 1506 600 420 600 SUF 1507 800 560 800 SUF 1508 1000 700 1000 units V V V If(av) 1.5 A Ifsm 50.0 A Vf 1.0 1.4 10.0 100.0 Ir Trr Cj 1.7 50 50 V µA µA 75 30 nS pF Typical Thermal Resistance (Note 3) R(ja) 20.0 °C/ W Storage and Operating Junction Temperature Tstg, Tj -55 to +150 °C Note: 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc 3. Thermal Resistance from Junction to Ambient at 3/8”lead length, P.C. Board Mounted Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES SUF1500 THRU SUF1508 1 1 Rev.A1 www.gulfsemi.com