H HiTRON UNIVERSAL INPUT AC-DC PCB OPEN FRAME TRIPLE OUTPUT 17-18 WATTS INTERNAL SWITCHING POWER SUPPLIES HVI17 SERIES FEATURES: ACCOMMODATE UNIVERSAL AC SOURCES COMPACT PCB OPEN FRAME FORMAT MEET UNIVERSAL SAFETY STANDARDS EMI MEET CISPR PUB. 22 & FCC CLASS B CE MARKING COMPLIANCE SPECIFICATION INPUT SPECIFICATION OUTPUT SPECIFICATION Input Voltage: Range typ. 90-264Vac. Rating 100-240Vac. Input Connector: Molex 5273 or JST B5P-VH. Input Frequency: 47-63Hz. Inrush Current: ≤30.6A @ 230Vac by thermister. Input Current: Typ. 0.6mA @ 115Vac, 0.3mA @ 230Vac. Dielectric Withstand: Meet IEC950. EMI: Meet CISPR PUB.22 & FCC CLASS B. Hold-up Time: Typ.20mS @ 110Vac, 80mS @ 230Vac. Earth Leakage: Typ. less than 0.3mA @ 230Vac. Overload Protection (OLP): Fully protected against output overload and short circuit. Consult the factory for OLP setting. Output Voltage: See Ratings Chart. Output Current: See Ratings Chart. Output Wattage: Typ. 17-18 Watts. Output Connector: Molex 5267-NA or JST B8B-XH-A. Line Regulation: Typ. 0.1%. Load Regulation: Main VO1: typ. ±1.0-2.0%. Aux. VO2 & VO3: typ. ±2-3.0% (P.R.). Noise & Ripple: VO1 typ. 2% peak to peak. VO2 & VO3 typ. 1% peak to peak. OVP: Built-in main VO1 only. Adjustability: Available at main VO1 only. GENERAL SPECIFICATION Efficiency: Typ. 70%. Operating Temperature: 0 to +50°C. Switching Frequency: Fixed-freq. at 38K Hz. Storage Temperature: -20 to +85°C. Circuit Topology: Fixed-frequency flyback circuit. Temperature Coefficient: Typ. 0.04% /°C. Transient Response: Output voltage returns in Cooling: Free air convection. less than 3mS following a 25% load change. Safety standard: UL1950/EN60950 Class I. Construction: PCB open frame format. Power Density: 1.82 Watts / Cubic Inch. -13- OUTPUT VOLTAGE/CURRENT RATINGS CHART TRIPLE OUTPUT MODEL NO. MAIN VO1 @ ◇ AUX. VO2 AUX. VO3 Typ. Volt. Max. Typ. Volt. Max. Typ. Volt. Max. HVI17-30 2.2A +5V 3.0A 0.3A +12V 0.6A 0.2A -12V 0.3A HVI17-31 2.2A +5V 3.0A 0.3A +12V 0.6A 0.2A - 5V 0.3A HVI17-33 2.2A +5V 3.0A 0.3A +15V 0.6A 0.2A -15V 0.3A Symbol: " " OVP built-in. "@" Adjustable. "◇" Floating (or isolated) output. " " Installed with Post Regulator (P.R.). Remark: (1) At least 20% of typical main output current is required to maintain stated regulation. (2) Max. current can't be drawn from all output at the same time. MECHANICAL DIMENSIONS: MM [INCHES] WEIGHT: 150.0g (5.3 Oz.) INPUT & OUTPUT CONNECTORS PIN ASSIGNMENT AC INPUT AIISGNMENT AC-LINE AC-NEUTRAL P1-L P1-N CONNECTOR & PIN # Mating connector: P1 Molex 5195 or 5239 series/JST VHR-5N. P2 Molex 5264-N/JST XHP-8 or equivalent. TRIPLE OUTPUT AC-GROUND +VO1 -VO1 VO2 VO3 DC COM P1-G P2-1,2 P2-3,4 P2-5 P2-8 P2-6,7 -14-