H HiTRON UNIVERSAL INPUT AC-DC MEDICAL APPLICATION OPEN FRAME SINGLE OUTPUT 40 WATTS INTERNAL SWITCHING POWER SUPPLIES HMI40 SERIES FEATURES: ACCOMMODATE UNIVERSAL AC SOURCES COMPACT 5”x 3” PCB FORMAT MEET MEDICAL STANDARD EN 60601-1/ UL 2601-1 EMI MEET EN 55011 & FCC CLASS B CE MARKING COMPLIANCE SPECIFICATION INPUT SPECIFICATION Input Voltage: Range typ. 90-264Vac. Rating 100 to 240Vac. Input Connector: V-M connector. Input Frequency: 47-63Hz. Inrush Current: Typ. 2.36Arms @230Vac. Input Current: Typ. 0.66A@115Vac, 0.37A @230Vac. Dielectric Withstand: Meet IEC 60601-1. EMI: Meet EN55011 & FCC Class B. Hold-up Time: Typ. 14mS @115Vac, 78.4mS @ 230Vac. Earth Leakage: Less than 0.12mA @230Vac. OUTPUT SPECIFICATION Output Voltage: See Ratings Chart. Output Current: See Ratings Chart. Output Connector: V-M connector. Output Wattage: Typ. 40 watts. Line Regulation: Typ. 0.2-0.8%. Load Regulation: Main VO1 typ ±3%. Aux. VO2 typ. ±3.8%. Aux. VO3 typ. ±0.3%. Noise & Ripple: Typ. 1.0% peak to peak. OVP: Built-in at main output (Latch). Adjustability: Available at Main output. Overload Protection (OLP): Fully protected against outputs overload and short circuit. Typ. OLP set at 125-150% of rating output power. Consult the factory for OLP setting. GENERAL SPECIFICATION Efficiency: Typ. 71%(Various with output voltage). Switching Frequency: 45 KHz. Circuit Topology: Fixed frequency flyback circuit. Transient Response: Output voltage returns in less than 2mS following a 25% load change. Safety Standard: Meet Medical standards UL 2601-1/ EN 60601-1 Class I. Operating Temperature: -20 to +50 °C. (Various with output voltage). Storage Temperature: -20 to +85°C. Temperature Coefficient: Typ. 0.04%/°C. Cooling: Free air convection. Power Density: 2.18Watts / Cubic Inch. Construction: 5”x3“ PCB format. Note: Due to requests in market and advances in technology, specifications subject to change without notification. -11- OUTPUT VOLTAGE/CURRENT RATINGS CHART TRIPLE OUTPUT MODEL NO. MAIN +VO1 ★ Min. Typ. HMI40-T033EI 0A HMI40-T050II AUX. VO3 ◇ AUX. +VO2 Volt. Max. Min. Typ. Volt. Max. Min. Typ. Volt. Max. 6.0A +3.3V 6.9A 0A 1.5A + 5V 1.7A 0A 1.0A 12V 1.1A 0A 4.0A +5.0V 6.0A 0A 1.5A +12V 2.0A 0A 0.5A 12V 0.5A HMI40-T050KK 0A 4.0A +5.0V 6.0A 0A 1.0A +15V 1.5A 0A 0.5A 15V 0.5A HMI40-T050MI 0A 4.0A +5.0V 6.0A 0A 0.7A +24V 1.0A 0A 0.5A 12V 0.5A Symbol: "★" OVP built-in “◇”floating. MECHANICAL DIMENSIONS: MM [INCHES] WEIGHT: 145g (5.12 Oz.) INPUT & OUTPUT CONNECTORS PIN ASSIGNMENT AC INPUT ASSIGNMENT AC-L AC-N AC-G P1-L P1-N G CNTR/PIN# Mating connector: P1,2 Molex # 5195 or 5239 series. VO1 P2-2,3 -12- VO2 P2-1 SINGLE OUTPUT +VO3 P2-7 -VO3 P2-8 DC COM P2-4,5