HITRON HVI08

H HiTRON
03/26/08
UNIVERSAL INPUT AC-DC OPEN FRAME DUAL OUTPUT 8 WATTS
INTERNAL SWITCHING POWER SUPPLIES HVI08 SERIES
FEATURES:
„ ACCOMMODATE UNIVERSAL AC SOURCES
„ COMPACT 4x2x0.92 INCH PCB FORMAT
„ DUAL CONVETERS ARCHITECTURE
„ MEET UNIVERSAL SAFETY STANDARDS
„ EMI MEET CISPR PUB. 22 & FCC CLASS B
„ CE MARKING COMPLIANCE
SPECIFICATION
INPUT SPECIFICATION
Input Voltage: Range typ. 90-264Vac.
Rating 100 to 240Vac.
Input Connector: V-M connector.
Input Frequency: 47-63Hz.
Inrush Current: 2.9A rms @ 230Vac 50Hz.
Input Current: Typ. 0.12A@115Vac, 0.066A@230Vac.
Dielectric Withstand: Meet IEC 60950-1.
EMI: Meet CISPR PUB. 22 & FCC Class B.
Hold-up Time: Typ. 30.4mS @115Vac, 154.mS @ 230Vac.
Leakage Current: 0.67mA for IEC60950 Touch Current.
OUTPUT SPECIFICATION
Output Voltage: See Ratings Chart.
Output Current: See Ratings Chart.
Output Connector: V-M connector.
Output Wattage: Typ. 8 watts.
Line Regulation: Typ. 0.1%.
Load Regulation: Main VO1 typ. ±0.6%.
Aux. VO2 typ. ±0.6%.
Total Regulation: Main VO1 typ. ±0.6%.
Aux. VO2 typ. ±0.6%.
Noise & Ripple: Typ. 1.0% peak to peak.
OVP: Built-in at VO1 & VO2(Clamp).
Adjustability: Available at VO1 and VO2.
Overload Protection (OLP):
Fully protected against outputs overload and short circuit.
Typ. OLP set at 125-150% of rating output power.
Consult the factory for OLP setting.
GENERAL SPECIFICATION
Efficiency: Typ. 63.7%. (Various with output voltage).
Switching Frequency: 82KHz.
Circuit Topology: Fixed frequency flyback circuit.
Dual converters for floating output.
Transient Response: Output voltage returns in less than
0.1mS following a 25% load change.
Safety Standard: IEC 60950-1 Class I.
Operating Temperature: -40°C to +85 °C under forced
air flow for full load..
Storage Temperature: -40 to +85°C.
Temperature Coefficient: Typ. 0.04%/°C.
Cooling: Free air convection.
Construction: 4”x2”x0.92” PCB format.
Power Density: 1.35Watts / Cubic Inch.
Note: Due to requests in market and advances in technology, specifications subject to change without notification.
In application.
OUTPUT VOLTAGE / CURRENT RATINGS CHART
DUAL OUTPUT
MODEL NO.
AUX. VO2 ◇
MAIN VO1 ★
Min.
Typ.
Volt.
Min.
Typ.
Volt.
HVI08-D033Q
0A
1.5A
3.3V
0A
0.10A
48V
HVI08-D033M
0A
1.5A
3.3V
0A
0.20A
24V
HVI08-D033K
0A
1.5A
3.3V
0A
0.30A
15V
HVI08-D033I
0A
1.5A
3.3V
0A
0.40A
12V
HVI08-D033E
0A
1.5A
3.3V
0A
0.96A
5V
HVI08-D050Q
0A
1.0A
5.0V
0A
0.10A
48V
HVI08-D050M
0A
1.0A
5.0V
0A
0.20A
24V
HVI08-D050K
0A
1.0A
5.0V
0A
0.30A
15V
HVI08-D050I
0A
1.0A
5.0V
0A
0.40A
12V
HVI08-D050E
0A
1.0A
5.0V
0A
0.96A
5V
Symbol: "★" OVP built-in.
"◇" Floating (or isolated) output
MECHANICAL DIMENSIONS: MM [INCHES]
WEIGHT: 100g (3.53Oz.)
DERATING CHART:
100
80
60
LOAD (%)
40
20
-40
-20
0
20
40
60
80 85
100
(℃)
INPUT & OUTPUT CONNECTORS PIN ASSIGNMENT
AC INPUT
ASSIGNMENT
AC-L
AC-N
P1-3
P1-1
CNTR/PIN#
Mating connector: P1,2 Molex # 5195 or 5239 series.
AC-G
G
VO1+
P2-1,2
DUAL OUTPUT
VO1VO2+
P2-3
P2-5,6
VO2P2-4