HMC-C073
v00.0609
WIDEBAND VCO w/ BUFFER AMPLIFIER
MODULE, 38.4 - 43.2 GHz
Features
Wideband Tuning Frequency: 38.4 - 43.2 GHz
High Output Power: +13 dBm
High Output Voltage: 3.5V pp
Low Phase Noise: -98 dBc/Hz @ 100 kHz Offset
Typical Applications
Low Jitter: 37 fs
The HMC-C073 VCO Module is ideal for:
Single Positive Supply: +5V @ 350 mA
• OC-768 Fiber Optic Systems
Operating Temperature: -55°C to + 85°C
• Test and Measurement Equipment
Ultra-Small Hermetic Module
• Lab Instrumentation
Field Replaceable 2.4mm Connector
• Industrial/Medical Equipment
• Millimeterwave Subsystems
Functional Diagram
General Description
The HMC-C073 is a high performance VCO that
operates over a 38.4 to 43.2 GHz band. An internal
output buffer provides +13 dBm of output power and
provides excellent pushing performance. Phase noise
performance is excellent at -98 dBc/Hz at 100 kHz
offset and the unit provides exceptional jitter of 37 fs
(calculated). The Vtune port accepts an analog tuning
voltage from +2 to +13V. Each VCO is housed in a very
small hermetic module measuring 0.7” x 0.99” x 0.23”.
The module is supplied with a 2.4mm connector,
which can be replaced by a GPO connector.
VCOs
10
Electrical Specifi cations, TA = +25° C, Vdc = +5V
Parameter
Min.
Frequency Range
Power Output
Max.
10
Units
GHz
13
dBm
SSB Phase Noise @ 10 kHz Offset
-74
dBc/Hz
SSB Phase Noise @ 100 kHz Offset
-98
dBc/Hz
Jitter (50 kHz to 80 MHz) (Calculated)
37
fs
Tune Voltage
2
13
V
Sub Harmonic (fo/4)
-40
dBc
Sub Harmonic (fo/2)
-30
dBc
Frequency Pushing
40
MHz/V
Frequency Pulling (into 2:0:1 Load)
5
kHz pp
Output Return Loss
Voltage Supply (Vdc)
Supply Current
10 - 16
Typ.
38.4 - 43.2
17
4.5
dB
5
5.5
V
350
400
mA
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
HMC-C073
v00.0609
WIDEBAND VCO w/ BUFFER AMPLIFIER
MODULE, 38.4 - 43.2 GHz
Frequency vs. Tuning Voltage, Vdc = +5V
Frequency vs. Tuning Voltage, T = +25°C
50
OUTPUT FREQUENCY (GHz)
45
40
+25 C
+85 C
-55 C
35
+ 4.5 V
+ 5.0 V
+ 5.5 V
45
40
35
30
30
0
2
4
6
8
10
12
14
0
2
4
TUNING VOLTAGE (V)
6
8
Sensitivity vs. Tuning Voltage, Vcc = +5V
12
14
Output Power vs. Frequency, Vcc = +5V
20
3000
OUTPUT POWER (dBm)
SENSITIVITY (MHz/V)
2500
+25 C
+85 C
-55 C
2000
1500
1000
15
10
10
+25 C
+85 C
-55 C
5
500
0
0
0
2
4
6
8
10
12
14
32
34
36
TUNING VOLTAGE (V)
38
40
42
44
46
FREQUENCY (GHZ)
Output Return Loss vs. Frequency, Vcc = +5V
Sub-Harmonics vs. Frequency, Vcc = +5V
40
0
35
-5
+25 C
+85 C
-55 C
-10
SUB-HARMONICS (dBc)
RETURN LOSS (dB)
10
TUNING VOLTAGE (V)
VCOs
OUTPUT FREQUENCY (GHz)
50
-15
-20
-25
30
25
20
15
10
f/4
f/2
5
3f/4
7f/8
0
-30
30
35
40
FREQUENCY (GHz)
45
50
35
36
37
38
39
40
41
42
43
44
45
FREQUENCY (GHz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
10 - 17
HMC-C073
v00.0609
WIDEBAND VCO w/ BUFFER AMPLIFIER
MODULE, 38.4 - 43.2 GHz
Absolute Maximum Ratings
Vdc
+5.5V
Vtune
+15V
Storage Temperature
-65 to +150 °C
Operating Temperature
-55 to +85 °C
Max Junction Temperature
150 °C
Thermal Resistance
29 °C/W
Pin Descriptions
VCOs
10
10 - 18
Pin Number
Function
Description
1
RFOUT
RF output (AC coupled) uses a
female 2.4mm connector.
2
GND
Must be connected to power supply ground.
3
Vdc
Supply Voltage Vdc = +4.5V to 5.5V
4
VTUNE
2 to +13V
Interface Schematic
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
HMC-C073
v00.0609
WIDEBAND VCO w/ BUFFER AMPLIFIER
MODULE, 38.4 - 43.2 GHz
Outline Drawing
;>@;
>@/*
;>@
;>@
;Q7+58>@
-
-
-
9781(
9'&
*1'
+0&&
>@
5)287
-
>@
>@
;;;;
>@
>@
;>@
>@
>@5()
/2712
6((127(
),(/'5(3/$&($%/(
00)(0$/(&211(&725
%2772072%(+(/'
$7&0$;
>@
>@
>@
10
>@
;>@
9781(
9'&
*1'
+0&&
>@
Package Information
5)287
Package Type
C-19
VCOs
;81&%[
;;;;
NOTES:
1. PACKAGE, LEADS COVER MATERIAL: KOVAR
2. FINISH: GOLD PLATE OVER NICKEL PLATE.
3. MOUNTING SPACER: NICKEL PLATED ALUMINUM.
>@
>@
3,1;/*
>00@
4. ALL DIMENSIONS ARE IN INCHES [MILLIMETERS].
5. TOLERANCES:
5.1 .XX = ±.02.
5.1 .XXX = ±.010
6. MARK LOT NUMBER ON 0.080 X 0.250 LABEL
WHERE SHOWN, WITH 0.030 MIN. TEXT HEIGHT.
9,(:6+2:1:,7+&211(&725$1'02817,1*63$&(55(029('
7. USE MOUNTING SPACER PART NUMBER 123399.
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order Online at www.hittite.com
10 - 19