New! Fluke 233 Remote Display Multimeter Technical Data The NEW Fluke 233 True-rms Remote Display Digital Multimeter allows you to be in two places at once. • Removable display gives the user ultimate flexibility in unusual measurement scenarios • Place the display where you can see it and then put the meter where it is convenient for you—no more juggling of leads and the meter while stretching into a tight spot • Removes the dilemma of trying to take measurements in hard-to-reach places, or making measurements in machines or panels that are physically separated from a limit or isolator switch • Can be used in areas where the operator can’t be close to the active measurement point, like clean rooms or hazardous areas • True-rms ac voltage and current • The removable magnetic display can be • • • • • • • for accurate measurements on non-linear signals Measure up to 1000 V ac and dc Measure up to 10 A (20 A for 30 seconds) 10,000 µF capacitance range Frequency to 50 kHz Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument Resistance, continuity and diode test Features • Low power wireless technology allows the display to be carried up to 10 meters (33 ft) away from the point of measurement for added flexibility. No interference with measurements • • • • • • • conveniently mounted where it is easily seen Make measurements without holding the meter to improve visual focus on probes and augment safe electrical measurements Use as a conventional multimeter when the display is connected Radio transmitter automatically turns off when the display is connected to the meter Auto power off maximizes battery life Min/Max and Average recording to capture variations automatically Test continuity and diodes Easy to read display with large digits and bright backlight Battery life approximately 400 hours Accuracy specifications DC voltage AC voltage DC current AC current Resistance Range 0.1 mV to 1000 V Accuracy 0.25 % + 2 Range 0.1 mV to 1000 V Accuracy 1.0 % + 3 Range 0.1 mA to 10 A Includes: Test leads, alligator clips, 80BK-A temperature probe, manual, CD-ROM, and AA batteries Accuracy 1.0 % + 3 Optional accessories Range 0.1 mA to 10 A Accuracy 1.5 % + 3 Range 0.1 W to 40 MW Counts 6000 Capacitance 1000 nF to 9999 µF Frequency 0.1 Hz to 50.00 kHz Temperature -40 °C to +400 °C Power AA batteries: Three for main body; two for display Battery life 400 hours Wireless frequency 2.4 GHz ISM Band 10 meter range Safety rating CAT IV 600 V , CAT III 1000 V Ordering information: 233 Remote Display Multimeter TPak Magnetic Hanging Kit i410 AC/DC Current Clamp 80PK-9 General Purpose Probe (Type K) 80AK-AThermocouple Adapter C35 Soft Carry Case General specifications Basic features AC true-rms Yes Ranging Auto/Manual Display Backlight Yes Data storage Min/Max/Avg Yes Other features Battery type AA alkaline Removable display Yes Warranty and protection Safety rating CAT IV 600 V/CAT III 1000 V External protection Rubber overmold Warranty Three-years Size (H x W x L) 5.3 cm x 5.3 cm x 19.3 cm (2.08 in x 2.08 in x 7.6 in) Weight 604 g (1.3 Ib) Fluke. Keeping your world up and running.® Fluke Corporation PO Box 9090, Everett, WA 98206 U.S.A. Fluke Europe B.V. PO Box 1186, 5602 BD Eindhoven, The Netherlands For more information call: In the U.S.A. (800) 443-5853 or Fax (425) 446-5116 In Europe/M-East/Africa +31 (0) 40 2675 200 or Fax +31 (0) 40 2675 222 In Canada (800)-36-FLUKE or Fax (905) 890-6866 From other countries +1 (425) 446-5500 or Fax +1 (425) 446-5116 Web access: http://www.fluke.com ©2009 Fluke Corporation. Specifications subject to change without notice. Printed in U.S.A. 9/2009 3476728B D-EN-N Modification of this document is not permitted without written permission from Fluke Corporation. 2 Fluke Corporation Fluke 233 Remote Display Multimeter