Filename: TFS1227C.doc Version 2.1 Vectron International 21.03.2013 Filter specification TFS 1227C 1/5 Measurement condition Ambient temperature: Input power level: Terminating impedance: Input: Output: 23 0 200 200 °C dBm Ω Ω Characteristics Remark: The maximum attenuation in the passband is defined as the insertion loss ae. The nominal frequency fN is fixed at 1227.6 MHz without any tolerance or limit. The values of absolute attenuation aabs are guaranteed for the whole operating temperature range. The frequency shift of the filter in the operating temperature range is included in the production tolerance scheme. Data typ. value Insertion loss in PB ae fN Nominal frequency Passband PB Passband variation 1277 dB max. 3.5 0.4 Absolute attenuation 0.3 1.5 tolerance / limit fN dB max. ± dB 1227.6 MHz 10.0 MHz 2.0 dB aabs MHz … 1177 MHz 30 dB min. 28 dB MHz … 2500 MHz 33 dB min. 30 dB Group delay ripple within PB Group delay variation (unit to unit) * 7 ns max. 12 ns +/-2 ns max. +/-5 ns VSWR within PB 1.9 : 1 max. Input power level in PB - max. - - 40 °C ... + 85°C Operating temperature range OTR Storage temperature range Temperature coefficient of frequency TCf ** -49 2.3 : 1 20 dBm - 45 °C ... + 85°C ppm/K *) measured at: fN , fN + 10 MHz , fN - 10 MHz **) ∆fc(Hz) = Tcf (ppm/K) x (T - To) x fCAT (MHz) Generated: Checked / Approved: Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: TFS1227C.doc Version 2.1 Vectron International 21.03.2013 Filter specification TFS 1227C 2/5 0.1 -1 0.09 -2 0.08 -3 0.07 -4 0.06 -5 0.05 -6 0.04 -7 0.03 -8 0.02 -9 0.01 1197.6 1207.6 1217.6 1227.6 1237.6 frequency in MHz 1247.6 0 -10 magnitude in dB 0 delay in µs magnitude in dB Filter characteristic -20 -30 -40 1257.6 0 500 1000 1500 frequency in MHz 2000 2500 Construction and pin connection (All dimensions in mm) 6 7 C27C ● D12 8 4 3 2 1 1,2 Max. 5 Date code d. Gr 3,0 +/-0,15 0,6 60 7 0,6 Input 1 Input 2 Ground Ground Output 2 Output 1 Ground Ground Date code: D E F ... Year + week 2013 2014 2015 3 1,5 1 1 2 3 4 5 6 7 8 5 0,6 200 Ω Test circuit 6 1 2 SAW 5 3, 4, 7, 8 Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: TFS1227C.doc Version 2.1 Vectron International 21.03.2013 Filter specification TFS 1227C 3/5 Stability characteristics, reliability After the following tests the filter shall meet the whole specification: 1. Shock: 500g, 1 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 2. Vibration: 10 Hz to 500 Hz, 0,35 mm or 5 g respectively, 1 octave per min, 10 cycles per plane, 3 planes; DIN IEC 68 T2 - 6 3. Change of temperature: 4. Resistance to solder heat (reflow): -55 °C to 125°C / 30 min. each / 10 cycles DIN IEC 68 part 2 – 14 Test N reflow possible: three times max.; for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4; This filter is RoHS compliant (2002/95/EG, 2005/618/EG) Packing Tape & Reel: IEC 286 – 3, with exception of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: reel of empty components at start: reel of empty components at start including leader: trailer: 3000 min. 300 mm min. 500 mm min. 300 mm Pull Off Direction Tape (all dimensions in mm) W : 8,00 ± 0,3 Po : 4,00 ± 0,1 Do : 1,50 +0,1/-0 E : 1,75 ± 0,1 F : 3,50 ± 0,05 G(min) : 0,75 P2 : 2,00 ± 0,05 P1 : 4,00 ± 0,1 D1(min) : 1,50 Ao : 3,25 ± 0,1 Bo : 3,25 ± 0,1 Ct : 5,3 ± 0,1 P1 t PIN Marker Po P2 W G Ct Bo F G E Do Ko Date Code Typ D1 Ao W 2 Reel (all dimensions in mm) A : 180 W1 : 8,4 +1,5/-0 W2(max) : 14,4 N(min) : 60 C : 13,0 ± 0,2 C A N W 1 The minimum bending radius is 45 mm. Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: TFS1227C.doc Version 2.1 Vectron International 21.03.2013 Filter specification TFS 1227C 4/5 Air reflow temperature conditions Conditions Average ramp-up rate (30°C to 217°C) > 100°C > 150°C > 217°C Peak temperature Time within 5°C of actual peak temperature Cool-down rate (Peak to 50°C) Time from 30°C to Peak temperature Exposure less than 3°C/second between 300 and 600 seconds between 240 and 500 seconds between 30 and 150 seconds max. 260°C between 10 and 30 seconds less than 6°C/second no greater than 300 seconds Chip-mount air reflow profile Temperature / °C max. 260°C 217°C max. 300 s 10 ... 30 s Time / s 30 ... 150 s Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Filename: TFS1227C.doc Vectron International Version 2.1 Filter specification 21.03.2013 TFS 1227C 5/5 History Version Reason of Changes Name Date 1.0 Generation of development specification Noack 20.06.2011 2.0 - Absolute attenuation updated (0,3 MHz … 1177 MHz) - Group delay variation from unit to unit corrected (fC fN) Molke 25.10.2012 2.1 - Change from development spec to filter spec - Typical values added - Filter characteristic added Molke 21.03.2013 Vectron International GmbH Potsdamer Straße 18 D 14 513 TELTOW / Germany Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 E-Mail: [email protected] Vectron International GmbH reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.