VVA1, VVA2, VVA3 Full Size VCXO Package Option A1=0. 8”x0. 5”x0. 2”14pi nDI P A2=0. 8”x0. 5”x0. 2”14pi nGul l LeadedSur f aceMount A3=0. 8”x0. 5”x0. 4”14pi nDI P Frequency Range 1.0 to 40 MHz (Fundamental <80ps/pk-pk Jitter) 40 to 160 MHz uses a low jitter internal multiplier IC (<150ps/pk-pk Jitter) which improves aging and pullability but will also increase phase noise Electrical Options A = +5.0 Vdc 20% Linearity B = +3.3 Vdc 20% Linearity E = +5.0 Vdc 10% Linearity F = +3.3 Vdc 10% Linearity Voltage Control Range Slope Positive 1 = 50 PPM Minimum 2 = 100 PPM Minimum 3 = 150 PPM Minimum 4 = 200 PPM Minimum Stability Options A = 100 PPM B = 50 PPM C = 100 PPM D = 50 PPM E = 25 PPM 0C to +70C 0C to +70C -40C to +85C -40C to +85C 0C to +70C Tight Stability Options G = 20 PPM H = 10 PPM I = 20 PPM 0C to +70C A3 Package 0C to +70C A3 Package -40C to +85C A3 Package Calibration Tolerance 25 PPM at +25 2C at Center Voltage Duty Cycle 40/60 Start-Up 10 ms Maximum Aging <5.0 PPM/First year at +40C dynamic A1 and A2 Package <2.0 PPM/First year at +40C dynamic A3 Package Load 15 pF HCMOS or 5 TTL Maximum Current 20 mA Maximum 20 MHz 40 mA Maximum 30MHz 50 mA Maximum >30MHz (Inclusive of Operating Temperature, Supply Voltage and Load) Vectron International, 267 Lowell Rd, Hudson NH 03051-4916 Tel: 1-88-VECTRON-1 Website: www.vectron.com 1 STD Package A1, A3 Anti Static Tubes A2 Tape & Reel 250 pcs/reel Environmental and Mechanical Compliance Parameter Mechanical Shock Mechanical Vibration Lead Solderability Gross Leak Fine Leak Storage Temperature Vectron International, 267 Lowell Rd, Hudson NH 03051-4916 Conditions MIL-STD-883, 2002.3 B MIL-STD-883, 2007.1 B MIL-STD-883, 2003.5 MIL-STD-883, 1014.7 MIL-STD-883, 1014.7 -55C to 125C Tel: 1-88-VECTRON-1 Website: www.vectron.com 2