VVA1, VVA2, VVA3 Full Size VCXO Package Option A1 = 0.8” x 0.5” x 0.2” 14 pin DIP A2 = 0.8” x 0.5” x 0.2” 14 pin Gull Leaded Surface Mount A3 = 0.8” x 0.5” x 0.4” 14 pin DIP Frequency Range 1.0 to 40 MHz (Fundamental <80ps/pk-pk Jitter) 40 to 160 MHz uses a low jitter internal multiplier IC (<150ps/pk-pk Jitter) which improves aging and pullability but will also increase phase noise Electrical Options A = +5.0 Vdc ± 20% Linearity B = +3.3 Vdc ± 20% Linearity E = +5.0 Vdc ± 10% Linearity F = +3.3 Vdc ± 10% Linearity Voltage Control Range Slope Positive 1 = ±50 PPM Minimum 2 = ±100 PPM Minimum 3 = ±150 PPM Minimum 4 = ±200 PPM Minimum Stability Options A = ±100 PPM B = ±50 PPM C = ±100 PPM D = ±50 PPM E = ±25 PPM 0C to +70C 0C to +70C -40C to +85C -40C to +85C 0C to +70C Tight Stability Options G = ±20 PPM H = ±10 PPM I = ±20 PPM 0C to +70C A3 Package 0C to +70C A3 Package -40C to +85C A3 Package Calibration Tolerance ±25 PPM at +25 ±2C at Center Voltage Duty Cycle 40/60 Start-Up 10 ms Maximum Aging <5.0 PPM/First year at +40C dynamic A1 and A2 Package <2.0 PPM/First year at +40C dynamic A3 Package Load 15 pF HCMOS or 5 TTL Maximum Current 20 mA Maximum ≤20 MHz 40 mA Maximum ≤30MHz 50 mA Maximum >30MHz (Inclusive of Operating Temperature, Supply Voltage and Load) Vectron International, 267 Lowell Rd, Hudson NH 03051-4916 Tel: 1-88-VECTRON-1 Website: www.vectron.com 1 STD Package A1, A3 Anti Static Tubes A2 Tape & Reel 250 pcs/reel Environmental and Mechanical Compliance Parameter Mechanical Shock Mechanical Vibration Lead Solderability Gross Leak Fine Leak Storage Temperature Conditions MIL-STD-883, 2002.3 B MIL-STD-883, 2007.1 B MIL-STD-883, 2003.5 MIL-STD-883, 1014.7 MIL-STD-883, 1014.7 -55C to 125C VVA1, VVA3 Vectron International, 267 Lowell Rd, Hudson NH 03051-4916 Tel: 1-88-VECTRON-1 Website: www.vectron.com 2 Vectron International, 267 Lowell Rd, Hudson NH 03051-4916 Tel: 1-88-VECTRON-1 Website: www.vectron.com 3