LITTELFUSE P4KE10CA

Transient Voltage Suppression Diodes
Axial Leaded – 400W > P4KE series
RoHS
P4KE Series
Description
The P4KE Series is designed specifically to protect
sensitive electronic equipment from voltage transients
induced by lightning and other transient voltage events.
Features
t -PXJODSFNFOUBMTVSHF
resistance
t 5ZQJDBM*R less than 1μA
above 13V
ΔVBR = 0.1% x [email protected]°C x ΔT t )JHIUFNQFSBUVSF
soldering guaranteed:
t (MBTTQBTTJWBUFEDIJQ
260°C/40 seconds /
junction in DO-41 Package
0.375”,(9.5mm) lead
t 8QFBLQVMTF
length, 5 lbs., (2.3kg)
capability at 10×1000μs
tension
waveform, repetition rate
t
1MBTUJDQBDLBHFIBT
(duty cycles):0.01%
Underwriters Laboratory
t 'BTUSFTQPOTFUJNF
Flammability classification
typically less than 1.0ps
94V-O
from 0 Volts to BV min
t .BUUF5JO-FBEoGSFFQMBUFE
t &YDFMMFOUDMBNQJOH
capability
Agency Approvals
AGENCY
AGENCY FILE NUMBER
E230531
Maximum Ratings and Thermal Characteristics
(TA=25OC unless otherwise noted)
Parameter
Symbol
Value
Unit
PPPM
400
W
PD
1.5
W
Applications
IFSM
40
A
TVS devices are ideal for the protection of I/O interfaces,
VCC bus and other vulnerable circuits used in telecom,
computer, industrial and consumer electronic applications.
VF
3.5/5.0
V
TJ , TSTG
-55 to 175
°C
Typical Thermal Resistance Junction
to Lead
RuJL
60
°C/W
Typical Thermal Resistance Junction
to Ambient
RuJA
100
°C/W
Peak Pulse Power Dissipation by
10x1000μs test waveform (Fig.1)
(Note 1)
Steady State Power Dissipation on
inifinite heat sink at TL=75ºC (Fig. 5)
Peak Forward Surge Current, 8.3ms
Single Half Sine Wave Unidirectional
only (Note 2)
Maximum Instantaneous Forward
Voltage at 25A for Unidirectional
only (Note 3)
Operating Junction and Storage
Temperature Range
Notes:
1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25OC per Fig. 2.
2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per
minute maximum.
_ 200V and VF<5.0V for devices of VBR >
_ 201V.
3. VF<3.5V for devices of VBR <
©2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to http://www.Littelfuse.com/series/P4KE.html for current information.
65
Revision: January 09, 2009
P4KE Series
P4KE Series
t)BMPHFO'SFF
t 3P)4DPNQMJBOU
t 5ZQJDBMNBYJNVN
temperature coefficient
Transient Voltage Suppression Diodes
Axial Leaded – 400W > P4KE series
Electrical Characteristics
Part
Number
(Uni)
Part
Number
(Bi)
Reverse
Stand off
Voltage VR
(Volts)
P4KE6.8A
P4KE7.5A
P4KE8.2A
P4KE9.1A
P4KE10A
P4KE11A
P4KE12A
P4KE13A
P4KE15A
P4KE16A
P4KE18A
P4KE20A
P4KE22A
P4KE24A
P4KE27A
P4KE30A
P4KE33A
P4KE36A
P4KE39A
P4KE43A
P4KE47A
P4KE51A
P4KE56A
P4KE62A
P4KE68A
P4KE75A
P4KE82A
P4KE91A
P4KE100A
P4KE110A
P4KE120A
P4KE130A
P4KE150A
P4KE160A
P4KE170A
P4KE180A
P4KE200A
P4KE220A
P4KE250A
P4KE300A
P4KE350A
P4KE400A
P4KE440A
P4KE480A
P4KE510A
P4KE530A
P4KE540A
P4KE550A
P4KE6.8CA
P4KE7.5CA
P4KE8.2CA
P4KE9.1CA
P4KE10CA
P4KE11CA
P4KE12CA
P4KE13CA
P4KE15CA
P4KE16CA
P4KE18CA
P4KE20CA
P4KE22CA
P4KE24CA
P4KE27CA
P4KE30CA
P4KE33CA
P4KE36CA
P4KE39CA
P4KE43CA
P4KE47CA
P4KE51CA
P4KE56CA
P4KE62CA
P4KE68CA
P4KE75CA
P4KE82CA
P4KE91CA
P4KE100CA
P4KE110CA
P4KE120CA
P4KE130CA
P4KE150CA
P4KE160CA
P4KE170CA
P4KE180CA
P4KE200CA
P4KE220CA
P4KE250CA
P4KE300CA
P4KE350CA
P4KE400CA
P4KE440CA
P4KE480CA
P4KE510CA
P4KE530CA
P4KE540CA
P4KE550CA
5.80
6.40
7.02
7.78
8.55
9.40
10.20
11.10
12.80
13.60
15.30
17.10
18.80
20.50
23.10
25.60
28.20
30.80
33.30
36.80
40.20
43.60
47.80
53.00
58.10
64.10
70.10
77.80
85.50
94.00
102.00
111.00
128.00
136.00
145.00
154.00
171.00
185.00
214.00
256.00
300.00
342.00
376.00
408.00
434.00
477.00
486.00
495.00
Breakdown
Voltage
[email protected] IT (V)
MIN
MAX
Test
Current
IT
(mA)
6.45
7.13
7.79
8.65
9.50
10.50
11.40
12.40
14.30
15.20
17.10
19.00
20.90
22.80
25.70
28.50
31.40
34.20
37.10
40.90
44.70
48.50
53.20
58.90
64.60
71.30
77.90
86.50
95.00
105.00
114.00
124.00
143.00
152.00
162.00
171.00
190.00
209.00
237.00
285.00
332.00
380.00
418.00
456.00
485.00
503.50
513.00
522.50
7.14
7.88
8.61
9.55
10.50
11.60
12.60
13.70
15.80
16.80
18.90
21.00
23.10
25.20
28.40
31.50
34.70
37.80
41.00
45.20
49.40
53.60
58.80
65.10
71.40
78.80
86.10
95.50
105.00
116.00
126.00
137.00
158.00
168.00
179.00
189.00
210.00
231.00
263.00
315.00
368.00
420.00
462.00
504.00
535.00
556.50
567.00
577.50
10
10
10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Maximum
Clamping
Voltage
VC @ Ipp
(V)
Maximum
Peak
Pulse
Current Ipp
(A)
Maximum
Reverse
Leakage
IR @ VR(μA)
Agency
Approval
10.5
11.3
12.1
13.4
14.5
15.6
16.7
18.2
21.2
22.5
25.5
27.7
30.6
33.2
37.5
41.4
45.7
49.9
53.9
59.3
64.8
70.1
77.0
85.0
92.0
103.0
113.0
125.0
137.0
152.0
165.0
179.0
207.0
219.0
234.0
246.0
274.0
328.0
344.0
414.0
482.0
548.0
602.0
658.0
698.0
725.0
740.0
760.0
39.00
36.30
33.90
30.60
28.30
26.30
24.60
22.50
19.30
18.20
16.10
14.80
13.40
12.30
10.90
9.90
9.00
8.20
7.60
6.90
6.30
5.80
5.30
4.80
4.50
4.00
3.60
3.30
3.00
2.70
2.50
2.30
2.00
1.90
1.80
1.70
1.50
1.30
1.20
1.00
0.85
0.75
0.68
0.61
0.57
0.55
0.54
0.52
1000
500
200
50
10
5
5
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
For bidirectional type having VR of 10 volts and less, the IR limit is double.
For parts without A , the VBR is ± 10% and VC is 5% higher than with A parts
P4KE Series
66
Revision: January 09, 2009
©2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to http://www.Littelfuse.com/series/P4KE.html for current information.
Transient Voltage Suppression Diodes
Axial Leaded – 400W > P4KE series
Ratings and Characteristic Curves (T =25°C unless otherwise noted)
A
Figure 1 - Peak Pulse Power Rating
Figure 2 - Pulse Derating Curve
Peak Pulse Power (PPP) or Current (IPP)
Derating in Percentage, %
10
1
0.1
0.1μs
100
75
50
25
0
1.0μs
10μs
100μs
1.0ms
10ms
0
td - Pulse Width (sec.)
50
75
100
125 150
175 200
TA- Ambient Temperature (˚C)
Figure 3 - Pulse Waveform
Figure 4 - Typical Junction Capacitance Uni-Directional
10000
150
tr=10μsec
TJ=25°C
Pulse Width(td) is defined
as the point where the peak
current decays to 50% of IPPM
Peak Value
IPPM
100
Bi-directional VR=0V
1000
Cj (pF)
IPPM- Peak Pulse Current, % IRSM
25
Half Value
IPPM IPPM
( )
Uni-directional VR=0V
Uni-directional @ V R
100
2
50
Bi-directional @V R
10/1000μsec. Waveform
as defined by R.E.A
10
Tj=25C
f=1.0MHz
Vsig=50mVp-p
0
td
1.0
0
2.0
3.0
1
1.0
4.0
t-Time (ms)
10.0
100.0
1000.0
VBR - Reverse Breakdown Voltage (V)
Figure 6 - Maximum Non-Repetitive Peak Forward
Surge Current Uni-Directional Only
Figure 5 - Steady Pulse Derating Curve
1.2
1
IFSM - Peak Forward Surge Current
(A)
Steady Sate Power Dissipation (W)
45
0.8
0.6
L = 0.375" (9.5mm)
Lead Lengths
0.4
0.2
40
35
30
25
20
15
10
5
0
0
25
50
75
100
125
150
175
0
200
1
TL-Lead Temperature(ºC)
©2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to http://www.Littelfuse.com/series/P4KE.html for current information.
10
100
Number of Cycles at 60 Hz
67
Revision: January 09, 2009
P4KE Series
P4KE Series
PPPM- Peak Pulse Power (KW)
100
Transient Voltage Suppression Diodes
Axial Leaded – 400W > P4KE series
Soldering Parameters
Reflow Condition
-FBEoGSFFBTTFNCMZ
Pre Heat
Ramp-up
150°C
- Temperature Max (Ts(max))
200°C
- Time (min to max) (ts)
oTFDT
Average ramp up rate (Liquidus Temp
(TL) to peak
3°C/second max
TS(max) to TL - Ramp-up Rate
3°C/second max
Reflow
Critical Zone
TL to TP
TL
Temperature (T)
- Temperature Min (Ts(min))
tp
TP
tL
Ts(max)
Ramp-down
Ts(min)
ts
Preheat
25˚C
- Temperature (TL) (Liquidus)
217°C
- Time (min to max) (ts)
oTFDPOET
t 25˚C to Peak
Time (t)
Peak Temperature (TP)
260+0/-5 °C
Time within 5°C of actual peak
Temperature (tp)
oTFDPOET
Flow/Wave Soldering (Solder Dipping)
Ramp-down Rate
6°C/second max
Peak Temperature :
260OC
Time 25°C to peak Temperature (TP)
8 minutes Max.
Dipping Time :
5 seconds
Do not exceed
280°C
Soldering :
1 time
Physical Specifications
Environmental Specifications
Weight
0.012oz., 0.3g
Temperature Cycle
JESD22-A104
Case
JEDEC DO-204AL (DO-41) molded
plastic body over passivated junction.
Pressure Cooker
JESD 22-A102
Polarity
Color band denotes the cathode except
Bipolar.
High Temp. Storage
JESD22-A103
Terminal
Matte Tin axial leads, solderable per
JESD22-B102D.
HTRB
JESD22-A108
Thermal Shock
JESD22-A106
Dimensions
Dimensions
D
A
B
A
Millimeters
Min
Max
Min
Max
1.000
-
25.40
-
B
0.160
0.205
4.10
5.20
C
0.028
0.034
0.71
0.86
D
0.080
0.107
2.00
2.70
A
C
Inches
DO-204AL (DO-41)
P4KE Series
68
Revision: January 09, 2009
©2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to http://www.Littelfuse.com/series/P4KE.html for current information.
Transient Voltage Suppression Diodes
Axial Leaded – 400W > P4KE series
Part Numbering System
Part Marking System
Cathode Band
P4KE xxx XX X
P4KEXXX
OPTION CODE:
BLANK Reel Tape
-B Bulk Packaging
TYPE CODE:
A Uni-Directional (5% Voltage Tolerance)
CA Bi-Directional
F
VOLTAGE CODE
(Refer to the Electrical Characteristics table)
Littelfuse Logo
Product Type
SERIES CODE
Packaging
Quantity
Packaging
Option
P4KExxxXX
DO-204AL
5000
Tape & Reel
P4KExxxXX-B
DO-204AL
500
BOX
©2009 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to http://www.Littelfuse.com/series/P4KE.html for current information.
Packaging Specification
EIA STD RS-296E
P4KE Series
Component
Package
Part Number
Littelfuse Concord Packing Spec. DM-0016
69
Revision: January 09, 2009
P4KE Series