• 60 WATTS OUTPUT POWER • 2:1 WIDE INPUT VOLTAGE RANGE • DESIGN MEET SAFETY STANDARD • SIX-SIDED CONTINUOUS SHIELD • HIGH EFFICIENCY UP TO 90% • 3.94” X 2.76” X 0.75” PACKAGE • FIXED SWITCHING FREQUENCY The FDC60 series offer 60 watts of output power from a 3.94 x 2.76 x 0.75 inch package. The FDC60 series have 2:1 wide input voltage of 9-18, 18-36 and 36-75VDC. The FDC60 features 1600VDC of isolation, short-circuit and over-voltage protection, as well as six sided shielding. Designed meets the safety of EN60950 and UL1950. All models are particularly suited to telecommunications, industrial, mobile telecom and test equipment applications. T E C H N I C A L S P E C I F I C AT I O N All specifications are typical at nominal input, full load and 25ºC otherwise noted GENERAL SPECIFICATIONS OUTPUT SPECIFICATIONS Output power 60 Watts max Voltage accuracy Full load and nominal Vin ± 2% Voltage adjustability ± 10% Minimum load (Note 1) FDC60-XXD3305 3.3V output Others Line regulation LL to HL at Full Load Load regulation 10% to 100% FL 20MHz bandwidth 1600VDC, min Isolation resistance 10 ohms, min 9 Isolation capacitance 1000pF, max ± 0.5% Switching frequency 200KHz, typ ± 0.5% Design meet safety standard UL1950, EN60950 Nickel-coated copper 1%/p-p of Vout max Base material Non-conductive black plastic I0.02% / ºC, max Transient response recovery time 25% load step change 3.3V output Over voltage protection 5V output Zener diode clamp 12V output 15V output 500uS 3.9V 6.2V 15V 18V Hiccup, automatics recovery Potting material Epoxy (UL94-V0) 3.94 X 2.76 X 0.75 Inches (100.2 X 70.0 X 19.0 mm) Dimensions Weight 280g (9.86oz) 1.533 x 106 hrs MTBF (Note 4) ENVIRONMENTAL SPECIFICATIONS Operating temperature range INPUT SPECIFICATIONS Input voltage range Isolation voltage Case material Temperature coefficient Short circuit protection See table ± 5% Cross regulation (Note 2) Ripple and noise 800mA, min 10% of FL Efficiency 12V nominal input 24V nominal input 48V nominal input Input filter 9 – 18VDC 18 – 36VDC 36 – 75VDC Pi type Maximum case temperature +95ºC Storage temperature range -25ºC ~ +100ºC Thermal impedance 5.2ºC/watt 36VDC 50VDC 100VDC Thermal shock Input reflected ripple (Note 3) Nominal Vin and full load 40mAp-p Relative humidity Start up time 25mS typ EMC CHARACTERISTICS Input surge voltage 100mS max 12V input 24V input 48V input Nominal Vin and constant resistor load Remote ON/OFF Remote off input current DC-DC ON DC-DC OFF Nominal input Open or 3.5V < Vr < 12V Short or 0V < Vr < 1.2V 30mA -25ºC ~ +71ºC (with derating) MIL-STD-810D Vibration Conducted emissions 10~55Hz, 2G, 30minutes along X,Y and Z 5% to 95% RH EN55022 Level A Radiated emissions EN55022 Conducted immunity EN61000-4-6 Perf. Criteria2 Level A Radiated immunity EN61000-4-3 Perf. Criteria2 Surge EN61000-4-5 Perf. Criteria2 Fast transient EN61000-4-4 Perf. Criteria2 ESD EN61000-4-2 Perf. Criteria2 (6) (7) Model Number Input Range Output Voltage Output Current Input (5) Current Eff (%) Capacitor Load max FDC60-12S33 FDC60-12S05 FDC60-12S12 FDC60-12S15 FDC60-12D05 FDC60-12D12 FDC60-12D15 FDC60-12D3305 FDC60-24S33 FDC60-24S05 FDC60-24S12 FDC60-24S15 FDC60-24D05 FDC60-24D12 FDC60-24D15 FDC60-24D3305 FDC60-48S33 FDC60-48S05 FDC60-48S12 FDC60-48S15 FDC60-48D05 FDC60-48D12 FDC60-48D15 FDC60-48D3305 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 9 – 18 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 18 – 36 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 36 – 75 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 3.3 / 5VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 3.3 / 5VDC 3.3 VDC 5 VDC 12 VDC 15 VDC ± 5 VDC ± 12 VDC ± 15 VDC 3.3 / 5VDC 15A 12A 5A 4A +10 / -2A ± 2.5A ± 2A 6 / 6A 15A 12A 5A 4A +10 / -2A ± 2.5A ± 2A 6 / 6A 15A 12A 5A 4A +10 / -2A ± 2.5A ± 2A 6 / 6A 5430mA 6330mA 6250mA 6250mA 6500mA 6250mA 6250mA 5770mA 2750mA 3090mA 2980mA 2940mA 3130mA 3050mA 3010mA 2700mA 1310mA 1520mA 1470mA 1450mA 1540mA 1450mA 1450mA 1310mA 80 83 84 84 81 84 84 76 79 85 88 89 84 86 87 81 83 86 89 90 85 90 90 83 38700uF 20400uF 3550uF 2300uF 17000 / 3400uF ± 900uF ± 600uF 16000 / 10200uF 38700uF 20400uF 3550uF 2300uF 17000 / 3400uF ± 900uF ± 600uF 16000 / 10200uF 38700uF 20400uF 3550uF 2300uF 17000 / 3400uF ± 900uF ± 600uF 16000 / 10200uF Note 1. 2. 3. 4. 5. 6. 7. EXTERNAL OUTPUT TRIMMING The FDC60 series required a minimum 10% loading on the output to maintain specified regulation. Operation under no-load condition will not damage these devices, however they may not meet all listed specification. Cross regulation: Dual output—Asymmetrical load 25% to 100% full load Simulated source impedance of 12uH. 12uH inductor in series with +Vin. BELLCORE TR-NWT-000332. Case I: 50% Stress, Temperature at 40ºC. (Ground fixed and controlled environment) Maximum value at nominal input voltage and full load Typical value at nominal input voltage and full load. Test by minimum Vin and constant resistor load. 6 0.98 (25.0) 7 Bottom View 1.00 (25.4) 2 8 9 3 Mounting inserts: #4-40 0.39 (10.0) 4(4) [4] 10 0.30 (7.6) 3.25 (82.6) RD 6(6) [6] 2.76(70.0) 0.39 0.39 0.39 (10.0) (10.0) (10.0) 1.00 (25.4) 1 5 TRIM DOWN 4(4) [4] RU 0.39 0.39 0.39 0.39 0.39 0.39 (10.0) (10.0) (10.0) (10.0) (10.0) (10.0) 4 1.00 (25.4) TRIM UP 7(9) [7] 0.05 (1.3) 3.94 (100.2) 1.00 (25.4) Output can be externally trimmed by using the method shown below. ( ) for dual output trim [ ] XXD3305 only trim 3.3V 0.32 (8.0) 1. All dimensions in Inches (mm) 2. Pin Pitch tolerance ±0.014(0.35) 0.75 (19.0) PIN CONNECTION PIN 1 2 3 4 5 SINGLE DUAL + INPUT + INPUT - INPUT - INPUT CTRL CTRL TRIM TRIM +OUTPUT +OUTPUT D3305 PIN + INPUT - INPUT 6 7 8 9 10 CTRL TRIM +3.3V SINGLE DUAL +OUTPUT +OUTPUT - OUTPUT COM - OUTPUT COM NO PIN - OUTPUT NO PIN - OUTPUT D3305 +3.3V COM COM + 5V + 5V