ECO-PACTM 1 Single Phase Rectifier Bridge PSB 54 IdAV VRRM = 54 A = 600-1600 V Preliminary Data Sheet VRSM VDSM (V) 700 900 1300 1500 1700 VRRM VDRM (V) 600 800 1200 1400 1600 + Type PSB PSB PSB PSB PSB ~A ~N 54/06 54/08 54/12 54/14 54/16 K Features Symbol Test Conditions I*dAV IFSM TC = 100 °C, (per module) ∫ i2 dt TVJ TVJM Tstg VISOL Maximum Ratings 54 A TVJ = 45 °C t = 10 ms (50 Hz), sine 300 A VR = 0 t = 8.3 ms (60 Hz), sine 320 A TVJ = TVJM t = 10 ms (50 Hz), sine 260 A VR = 0 t = 8.3 ms (60 Hz), sine 280 A TVJ = 45 °C t = 10 ms (50 Hz), sine 450 A²s VR = 0 t = 8.3 ms (60 Hz), sine 425 A²s TVJ = TVJM t = 10 ms (50 Hz), sine 340 A²s VR = 0 t = 8.3 ms (60 Hz), sine 325 A²s -40... + 150 150 °C °C -40... + 125 °C 50/60 Hz, RMS t = 1 min 2500 V∼ IISOL ≤ 1 mA 3000 V∼ 1.5 - 1.8 14 - 16 16 Nm lb.in. g t=1s Md Mounting torque Weight typ. (M4) Package with DCB ceramic base plate • UL registered, E 148688 Isolation voltage 3000 V∼ Planar glass passivated chips Low forward voltage drop Leads suitable for PC board soldering Applications • • • • Supplies for DC power equipment Input rectifier for PWM inverter Battery DC power supplies Field supply for DC motors Advantages • • • Easy to mount with two screws Space and weight savings Improved temperature and power cycling capability High power density Symbol Test Conditions IR VR = VRRM, TVJ = TVJM ≤ 3.0 mA VR = VRRM, TVJ = 25°C ≤ 0.5 mA IF = 55 A, ≤ 1.46 V Package style and outline 0.8 V Dimensions in mm (1mm = 0.0394“) VF VTO rT RthJC RthJK Characteristic Value • • • • • TVJ = 25 °C For power-loss calculations only per diode; DC per module per diode; DC per module ds dA a Creeping distance on surface Creeping distance in air Max. allowable acceleration 13 mΩ 1.1 0.28 1.6 K/W K/W K/W 0.4 K/W 11.2 9.7 50 mm mm m/s² • • Small and light weight Data according to IEC 60747 refer to a single diode unless otherwise stated *- for resistive load at bridge output POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20 2005 POWERSEM reserves the right to change limits, test conditions and dimensions