ECO-PACTM 1 Single Phase Full Controlled PSBT 25 IdAV = 32 A VRRM Rectifier Bridge = 600-1200V Preliminary Data Sheet VRSM VRRM Type VDSM VDRM (V) (V) 700 600 PSBT 25/06 900 800 PSBT 25/08 1300 1200 PSBT 25/12 Symbol Test Conditions I*dAV ITRMS ITAVM ITSM TC = 85 °C, ∫ i2 dt (di/dt)cr Maximum Ratings (per module) TVJ = TVJM 32 A - A 16 A TC = 85 °C, 180° sine, per thyristor TVJ = 45 °C t = 10 ms (50 Hz), sine 200 A VR = 0 t = 8.3 ms (60 Hz), sine 210 A TVJ = TVJM t = 10 ms 180 A VR = 0 t = 8.3 ms (60 Hz), sine 190 A TVJ = 45 °C t = 10 ms (50 Hz), sine 200 A²s VR = 0 t = 8.3 ms (60 Hz), sine 150 A²s TVJ = TVJM t = 10 ms (50 Hz), sine 160 A²s VR = 0 t = 8.3 ms (60 Hz), sine 150 A²s TVJ = TVJM repetitive, IT = 20 A 100 A/µs (50 Hz), sine f=50Hz, tP=200µs VD=2/3VDRM IG=0.15 A non repetitive,IT = ITAVM 500 A/µs 500 V/µs diG/dt=0.15A/µs (dv/dt)cr TVJ = TVJM VD=2/3VDRM RGK= ∞, method 1 (linear voltage rise) PGM PGAVM VRGM TVJ TVJM Tstg VISOL TVJ = TVJM tP=30µs ≤ 5 W IT = ITAVM tP=300µs ≤ 2.5 W 0.5 W 10 V -40... + 125 125 °C °C -40... + 125 °C 2500 V∼ 50/60 Hz, RMS t = 1 min IISOL ≤ 1 mA Md Mounting torque Weight typ. t=1s (M4) 3000 V∼ 1.5 - 1.8 14 - 16 16 Nm lb.in. g Features • • • • • Package with DCB ceramic base plate • UL registered, E 148688 Isolation voltage 3000 V∼ Planar glass passivated chips Low forward voltage drop Leads suitable for PC board soldering Applications • • • • Supplies for DC power equipment Imput rectifier for PWM inverter Battery DC power supplies Field supply for DC motors Advantages • • • • • Easy to mount with two screws Space and weight savings Improved temperature and power cycling capability High power density Small and light weight Data according to IEC 60747 refer to a single thyristor unless otherwise stated *for resistive load at bridge output 2005 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20 ECO-PACTM 1 Symbol Test Conditions ID,IR VT VTO rT VGT TVJ = TVJM, VR = VRRM, VD=VDRM ≤ IT = 20 A, ≤ IGT VGD IGD IL TVJ = 25 °C Characteristic Value For power-loss calculations only (TVJ = TVJM) 5 mA 1.6 V 0.85 V 27 mΩ TVJ = 25°C ≤ 1.5 V TVJ =-40°C ≤ 2.5 V TVJ = 25°C ≤ 25 mA TVJ =-40°C ≤ 50 mA TVJ= 125°C VD=2/3VDRM ≤ 0.2 V TVJ= 125°C VD=2/3VDRM ≤ 3 mA ≤ 75 mA TVJ= 25°C, VD=6V, RGK= ∞ ≤ 50 mA TVJ= 25°C, VD=1/2VDRM ≤ 2 µs per thyristor; DC per module per thyristor; DC 1.3 0.33 1.8 K/W K/W K/W per module 0.45 K/W Creeping distance on surface Creeping distance in air Max. allowable acceleration 11.2 5.0 50 mm mm m/s² VD = 6V VD = 6V TVJ= 25°C, tP=10µs IG=0.1A, diG/dt=0.1A/µs IH tgd IG=0.1A, diG/dt=0.1A/µs RthJC RthJK ds dA a Package style and outline Dimensions in mm (1mm = 0.0394“) 2005 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20