ECO-PACTM 1 Single Phase Half Controlled PSBZ 36 IdAV = 36 A VRRM Rectifier Bridge = 600-1600 V Preliminary Data Sheet VRSM VDSM (V) 700 900 1300 1500 1700 VRRM VDRM (V) 600 800 1200 1400 1600 Type PSBZ PSBZ PSBZ PSBZ PSBZ 36/06 36/08 36/12 36/14 36/16 Symbol Test Conditions I*dAV ITRMS ITAVM ITSM TC = 85 °C, ∫ i2 dt (di/dt)cr Maximum Ratings (per module) 36 A 31 A TC = 85 °C, 180° sine, per thyristor 40 A TVJ = 45 °C t = 10 ms (50 Hz), sine 320 A VR = 0 t = 8.3 ms (60 Hz), sine 350 A TVJ = TVJM t = 10 ms (50 Hz), sine 280 A VR = 0 t = 8.3 ms (60 Hz), sine 310 A TVJ = TVJM TVJ = 45 °C t = 10 ms (50 Hz), sine 500 A²s VR = 0 t = 8.3 ms (60 Hz), sine 520 A²s TVJ = TVJM t = 10 ms (50 Hz), sine 390 A²s VR = 0 t = 8.3 ms (60 Hz), sine 400 A²s TVJ = TVJM repetitive, IT = 50 A 150 A/µs f=50Hz, tP=200µs VD=2/3VDRM IG=0.15 A non repetitive, IT =1/2 . IdAV 500 A/µs 1000 V/µs diG/dt=0.15 A/µs (dv/dt)cr TVJ = TVJM PGAVM VRGM TVJ TVJM Tstg VISOL TVJ = TVJM tP=30µs ≤ 10 W IT = ITAVM tP=500µs ≤ 5 W tP= 10ms ≤ 1 W 0.5 W 10 V -40... + 125 125 °C °C -40... + 125 °C 50/60 Hz, RMS t = 1 min 2500 V∼ IISOL ≤ 1 mA 3000 V∼ 1.5 - 1.8 14 - 16 16 Nm lb.in. g Md Mounting torque Weight typ. • • • • • • Package with DCB ceramic base plate Isolation voltage 3600 V∼ Planar glass passivated chips Low forward voltage drop Leads suitable for PC board soldering UL registered, E 148688 Applications • • • • Supplies for DC power equipment Imput rectifier for PWM inverter Battery DC power supplies Field supply for DC motors Advantages VD=2/3VDRM RGK= ∞, method 1 (linear voltage rise) PGM Features t=1s (M4) • • • • • Easy to mount with two screws Space and weight savings Improved temperature and power cycling capability High power density Small and light weight Data according to IEC 60747 refer to a single thyristor unless otherwise stated *for resistive load at bridge output 2005 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20 ECO-PACTM 1 Symbol Test Conditions ID,IR TVJ = TVJM, VR = VRRM, VD=VDRM TVJ = 25°C VT VTO rT VGT IGT VGD IGD IL IT = 45 A, TVJ = 25 °C ≤ 5 mA ≤ 0.3 mA ≤ 1.45 V 0.85 V For power-loss calculations only (TVJ = TVJM) 13 mΩ TVJ = 25°C ≤ 1.0 V TVJ = -40°C ≤ 1.2 V TVJ = 25°C ≤ 65 mA TVJ = -40°C ≤ 80 mA TVJ =125°C ≤ 50 mA TVJ= TVJM VD=2/3VDRM ≤ 0.2 V TVJ= TVJM VD=2/3VDRM VD = 6V VD = 6V ≤ 5 mA TG=30µs, IG=0.3A, TVJ = 25°C ≤ 150 mA diG/dt=0.1A/µs ≤ 200 mA TVJ = -40 °C ≤ 100 mA TVJ= 25°C, VD=6V, RGK= ∞ ≤ 100 mA TVJ= 25°C, VD=1/2VDRM ≤ 2 µs 1.4 0.35 2.0 K/W K/W K/W 0.5 K/W 12.6 6.3 50 mm mm m/s² TVJ = 125°C IH tgd Characteristic Value IG = 0.3 A, diG/dt= 0.3 A/µs RthJC RthJK per thyristor; DC per module per thyristor; DC per module ds dA a Creeping distance on surface Creeping distance in air Max. allowable acceleration Package style and outline Dimensions in mm (1mm = 0.0394“) 2005 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20