MLVS Series MLVS-0402 Series This specification is applicable to Chip Metal Oxide Varistor in multilayer technology. 1. Rating(25 ± 5℃) Features 1. Keeping low and stable leakage current. 2. Excellent assembly solderability. 3. Low clamping Voltage. 4. Quick response time (<1nSec.) 5. High transient current capability 6. Test Standard meets IEC 61000-4-2, 61000-4-4, and 61000-4-5. Applications Applications for Mother Board, Notebook , Cellular Phone, PDA , handheld device, DSC, DV, Scanner, and Set-Top Box etc Part Number ● ● ● ● ● Specifications SeriesType Elements Size Tolerance Vrms MLV MLV MLV MLV MLV S S S S S 0402 0402 0402 0402 0402 M M L K K 04 07 08 11 14 Working voltage Symbol Units VDC Ir imax Wmax 6 Volts Volts (Max.) X10 ohm (Min.) Amps (Max.) Joules (Max.) < 10 µA 5 VDC 8/20µs 10/1000µs 5.5 9 11 14 18 ＞10 * ＞10 * ＞10 * ＞10 * ＞10 20 20 20 20 20 0.05 0.05 0.05 0.05 0.05 4 7 8 11 14 * the 10/1000us waveform without device failure 2.Characteristics(25 ± 5℃) Varistor voltage Symbol Units MLVS0402M04 MLVS0402M07 MLVS0402L08 MLVS0402K11 MLVS0402K14 ● ● ● Dimensions Transient energy ● *Measured resistance at 3.3V DC ● VRMS – Maximum AC operating voltage the varistor can maintain and not exceed 10 µA leakage current ● VDC – Maximum DC operating voltage the varistor can maintain and not exceed 10 µA leakage current ● Ir – Resistance at 5 V DC ● Imax – Maximum peak current which may be applied with 8/20us waveform without device failure ● Wmax – Maximum energy which may be dissipated with Test Condition Series Type / MLV — Multilayer Varistor Elements / S — Single Size / 0402 —1.00x0.50x0.50mm Tolerance / M/L/K —±20%/±15%/±10% Vrms — Working Voltage Vrms Peak current VRMS Test Condition MLVS0402M04 MLVS0402M07 MLVS0402L08 MLVS0402K11 MLVS0402K14 Resistanc e VV ∆VV Volts % Clamping Voltage Capacitance Vc Cp Volts (Max.) 1A 8/20µs 19 32 33 38 45 pF (typ.) 1mA DC 8 12.5 15 18 22 ±20 ±20 ±15 ±10 ±10 1KHz VV – Voltage across the device measured at 1mA DC current Vc – Maximum peak current across the varistor with 8/20us waveform and 1A pulse current Cp – Device capacitance measured with zero volt bias 1Vrms Electrical Characteristics L 1.General technical Characteristics W Operating temperature Storage temperature Response time Solderability Solder leach resistance T C C -55 … +125 (85 ) -55 … +125 (85 ) <1 ns 235 , 2s 260 , 10s 2. Environmental Characteristics Size / EIA 0402 L 1.00±0.15 W 0.50±0.08 Bias humidity ∆VV /VV ±10% T 0.50±0.08 Thermal shock ∆VV /VV ±10% Vibration ∆VV /VV ±10% Full load voltage Solder leach resistance ∆VV /VV ±10% 90%RH, 40 , Working voltage, 1000 hours -40 to 85 , 30 min. cycle, 5 cycles 10 to 50 to 10 Hz, 1 min. cycle, 2 hours each in X-Y-Z Working voltage, 25 , 1000 hours ∆VV /VV ±10% 260 , 10s C 300 155 135 100 95 Characteristics 0.30±0.15 Unit : mm Specifications Test condition INPAQ TECHNOLOGY CO.,LTD